Mitsubishi Pajero Pinin. Manual — part 169
NOTES
MANUAL
TRANSMISSION
Click on the applicable bookmark to selected the required model year
22-1
MANUAL
TRANSMISSION
CONTENTS
LUBRICANT
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SEALANTS AND ADHESIVES
2
. . . . . . . . . . . . . .
ON-VEHICLE SERVICE
2
. . . . . . . . . . . . . . . . . . . . .
Transmission Oil Check
2
. . . . . . . . . . . . . . . . . . . . . . .
Transmission Oil Change
2
. . . . . . . . . . . . . . . . . . . . . .
Transfer Oil Check
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transfer Oil Change
3
. . . . . . . . . . . . . . . . . . . . . . . . .
TRANSMISSION CONTROL
4
. . . . . . . . . . . . . . . . .
TRANSMISSION AND TRANSFER
ASSEMBLY
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4WD INDICATOR CONTROL UNIT
9
. . . . . . . . . .
MANUAL TRANSMISSION
–
Lubricant/Sealants and Adhesives/On-vehicle Service
22-2
LUBRICANT
Items
Specified lubricants
Quantity
ȏ
Transmission oil
Hypoid gear oil SAE 75W – 90 or 75W – 85W
conforming to API GL-4
2.4
Transfer oil
conforming to API GL-4
2.2
SEALANTS AND ADHESIVES
Items
Specified sealant
Remarks
Contact surface between transmission and
transmission control lever, thread (except
outer surface) of stopper bracket assembly
installation bolts and transfer control lever
gasket
3M ATD Part No.8660 or equivalent
Semi-drying sealant
Thread of stopper bracket assembly
installation bolts and thread of transfer
control lever assembly installation bolts
3M Stud Locking No.4170 or equivalent
Anaerobic sealant
ON-VEHICLE SERVICE
TRANSMISSION OIL CHECK
1.
Remove the oil filler plug.
2.
Oil level should be at the lower portion of the oil filler
plug hole.
3.
Check that the transmission oil is not noticeably dirty, and
that it has a suitable viscosity.
4.
Tighten the oil filler plug to the specified torque.
Tightening torque: 29 – 34 Nm
TRANSMISSION OIL CHANGE
1.
Remove the oil drain plug to drain oil.
2.
Tighten the oil drain plug to the specified torque.
Tightening torque: 39 Nm
3.
Remove the oil filler plug and fill with specified oil till the
level comes to the lower portion of oil filler plug hole.
Specified oil:
Hypoid gear oil SAE 75W – 90 or 75W – 85W
conforming to API GL-4
Quantity: 2.4
ȏ
4.
Tighten the oil filler plug to the specified torque.
Tightening torque: 29 – 34 Nm
Transmission oil
Oil filler
plug hole
Oil filler
plug
Oil drain plug
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст