Mitsubishi Galant 9G. Manual — part 37
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-144
NOTE: Also check intermediate connector C-26 and junction
block connector C-211 for loose, corroded, or damaged termi-
nals, or terminals pushed back in the connector. If intermediate
connector C-26 or junction block connector C-211 are dam-
aged, repair or replace the damaged component(s) as
described in GROUP 00E, Harness Connector Inspection
Q: Is the wiring harness between ETACS-ECU connector
C-219 (terminal 12) and front door lock actuator (LH)
connector E-15 (terminal 6) in good condition?
YES : Replace the ETACS-ECU. Verify that all the doors
can be locked and unlocked normally.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair or replace the damaged component(s). Verify
that the central door locking system works normally.
AC305231
CONNECTOR: C-26
AK
AC305415AH
CONNECTOR: C-211
C-211
HARNESS SIDE
JUNCTION BLOCK
(FRONT VIEW)
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-145
INSPECTION PROCEDURE C-2: Central Door Locking System: Some Doors do not Lock or Unlock.
JUNCTION BLOCK
FRONT DOOR
LOCK
ACTUATOR (LH)
FRONT DOOR
LOCK
ACTUATOR (RH)
REAR DOOR
LOCK
ACTUATOR (LH)
REAR DOOR
LOCK
ACTUATOR (RH)
ETACS-ECU
JUNCTION BLOCK SIDE
Central Door Lock Circuit
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-146
.
CIRCUIT OPERATION
• The ETACS-ECU operates the central door lock
system according to the following signals:
• Front door lock actuator switch
• Door lock key cylinder switch
• Door lock switch, which is incorporated in the
power window main switch or front power win-
dow sub switch
• The ETACS-ECU locks or unlocks all the doors
(except liftgate and glass hatch lock) by operating
the central door lock relay (incorporated in the
ECU) in response to input signals.
.
AC305233
CONNECTOR: C-12
AE
AC305231
CONNECTOR: C-26
AL
AC305415
C-211
CONNECTORS: C-204, C-211
AI
JUNCTION BLOCK
(FRONT VIEW)
C-204
AC305413
C-219
C-217
CONNECTORS: C-217, C-219
AF
JUNCTION BLOCK
(REAR VIEW)
AC400532
AB
CONNECTOR: D-19
AC400530
CONNECTOR: D-36
AC
AC305333
AF
CONNECTORS: E-05, E-08
E-05 (B)
E-08 (B)
AC305262
AK
CONNECOTRS: E-15, E-18
E-15 (B)
E-18 (B)
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-147
TECHNICAL DESCRIPTION (COMMENT)
The wiring harness between the door lock actuator or
the ETACS-ECU and the door lock actuator may be
defective.
.
TROUBLESHOOTING HINTS
• The front door lock actuator or rear door lock
actuator may be defective
• The wiring harness or connectors may have
loose, corroded, or damaged terminals, or termi-
nals pushed back in the connector
• The ETACS-ECU may be defective
DIAGNOSIS
Required Special Tool:
• MB991223: Harness Set
STEP 1. Check which door lock is defective.
Q: Which of the door locks is defective?
Driver's door : Go to Step 2.
Front passenger's door : Go to Step 7.
Rear door (LH) : Go to Step 11.
Rear door (RH) : Go to Step 15.
STEP 2. Check front door lock actuator (LH) connector
E-15 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Is front door lock actuator (LH) connector E-15 in good
condition?
YES : Go to Step 3.
NO : Repair or check the connector. Refer to GROUP 00E,
Harness Connector Inspection
. Verify that all
the doors can be locked and unlocked normally.
AC305262
E-15 (B)
HARNESS SIDE
CONNECTOR: E-15
AH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст