Mitsubishi L200. Manual — part 510
DOOR
BODY
42-100
STEP 2. Check the wiring harness between E-16
front power window sub switch connector
terminal Nos.2, 3 and E-18 front power window
motor (LH) connector terminal Nos.2, 5.
AC509952
Connectors: E-16, E-18 <RHD>
BA
E-16
Harness side
E-18 (B)
E-18 (B)
Harness side
E-16
• Check the input and output lines for open or short
circuit.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the wiring harness.
STEP 3. Check whether the diagnosis code is
reset.
(1) Replace the front power window motor (LH).
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the front power window sub switch.
NO :
The procedure is complete.
Code No.2003: P/W (AS) Above window position
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the front passenger's door window glass exceeds
the fully closed position, power window sub switch
(front: RH) sets the diagnosis code No. 2003. And, if
the passenger’s door window glass is removed or
installed with the power is supplied to the power win-
dow sub switch (front: RH) sets this diagnosis code.
PROBABLE CAUSES
• Malfunction of the front power window motor
<passenger’s side>
• Malfunction of the front power window sub switch
DIAGNOSIS PROCEDURE
STEP 1. Confirm the front power window
<passenger’s side> learning function.
(1) Check that the front power window sub switch
has learned the fully closed position of the
window (Refer to
).
(2) On completion, check that diagnosis code
No.2003 is not reset.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Go to Step 2.
STEP 2. Check whether the diagnosis code is
reset.
(1) Replace the front power window motor
<passenger’s side>.
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the front power window sub switch.
NO :
The procedure is complete.
DOOR
BODY
42-101
Code No.2004: P/W (AS) Sensor fail (earth) <LH drive vehicles>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
Power Window (Front: RH) Circuit
CPU
HALL IC
HALL IC
FRONT
POWER WINDOW
SUB SWITCH
POWER WINDOW
MOTOR
(FRONT: RH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple
FRONT (RH)
AC903690
E-01
7 C-122
AB
COMMENTS ON TROUBLE SYMPTOM
If the earth fault of the power window motor (front:
RH) sensor power supply is detected, power window
sub switch (front: RH) sets the diagnosis code No.
2004.
PROBABLE CAUSES
• Malfunction of the front power window motor
(RH)
• Malfunction of the front power window sub switch
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. Connector check: E-26 front power
window sub switch connector and E-01 front
power window motor (RH) connector
AC509954
Connectors: E-01, E-26 <LHD>
AH
Harness side
E-26
E-26
Harness side
E-01 (B)
E-01 (B)
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the connector.
DOOR
BODY
42-102
STEP 2. Check the wiring harness between E-26
front power window sub switch connector
terminal No. 3 and E-01 front power window
motor (RH) connector terminal No. 5.
AC509954
Connectors: E-01, E-26 <LHD>
AH
Harness side
E-26
E-26
Harness side
E-01 (B)
E-01 (B)
• Check the power supply line for open or short cir-
cuit.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the wiring harness.
STEP 3. Check whether the diagnosis code is
reset.
(1) Replace the front power window motor (RH).
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the front power window sub switch.
NO :
The procedure is complete.
Code No.2004: P/W (AS) Sensor fail (earth) <RH drive vehicles>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
Power Window (Front: LH) Circuit
CPU
HALL IC
HALL IC
FRONT
POWER WINDOW
SUB SWITCH
POWER WINDOW
MOTOR
(FRONT: LH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple
FRONT (LH)
AC903692
E-18
7 C-134
E-16
AB
DOOR
BODY
42-103
COMMENTS ON TROUBLE SYMPTOM
If the earth fault of the power window motor (front:
LH) sensor power supply is detected, power window
sub switch (front: LH) sets the diagnosis code No.
2004.
PROBABLE CAUSES
• Malfunction of the front power window motor (LH)
• Malfunction of the front power window sub switch
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. Connector check: E-16 front power
window sub switch connector and E-18 front
power window motor (LH) connector
AC509952
Connectors: E-16, E-18 <RHD>
BA
E-16
Harness side
E-18 (B)
E-18 (B)
Harness side
E-16
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the connector.
STEP 2. Check the wiring harness between E-16
front power window sub switch connector
terminal No. 3 and E-18 front power window
motor (LH) connector terminal No. 5.
AC509952
Connectors: E-16, E-18 <RHD>
BA
E-16
Harness side
E-18 (B)
E-18 (B)
Harness side
E-16
• Check the power supply line for open or short cir-
cuit.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the wiring harness.
STEP 3. Check whether the diagnosis code is
reset.
(1) Replace the front power window motor (LH).
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the front power window sub switch.
NO :
The procedure is complete.
Code No.2005: P/W (AS) 3 Times jam-protection
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the anti-trap function is activated consecutively
three times or more, power window sub switch (pas-
senger’s side) sets the diagnosis code No. 2005.
PROBABLE CAUSES
• Malfunction of the front power window motor
<passenger’s side>
• Malfunction of the front power window sub switch
DIAGNOSIS PROCEDURE
STEP 1. Confirm the front power window
<passenger’s side> learning function.
(1) Check that the front power window sub switch
has learned the fully closed position of the
window (Refer to
).
(2) On completion, check that diagnosis code
No.2005 is not reset.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Go to Step 2.
STEP 2. Check whether the diagnosis code is
reset.
(1) Replace the front power window motor
<passenger’s side>.
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the front power window sub switch.
NO :
The procedure is complete.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст