Mitsubishi L200. Manual — part 795
ETACS
CHASSIS ELECTRICAL
54A-547
wiring harness side.
(2) Check the resistance between the seat belt
switch connector and body earth.
• Resistance between D-25 seat belt switch
(LH) connector terminal No.2 and body earth
• Resistance between D-26 seat belt switch
(RH) connector terminal No.2 and body earth
OK: Continuity exists (2
Ω or less)
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Go to Step 4.
AC310506IC
Connectors D-25, D-26
(Harness side)
ETACS
CHASSIS ELECTRICAL
54A-548
STEP 4. Check the wiring harness between D-25
seat belt switch (LH) connector or D-26 seat belt
switch (RH) connector terminal No.2 and the
body earth.
• Check the earth wires for open circuit.
AC901130AE
Harness side
Connector: D-25 <SINGLE CAB-LHD>
AC903963AB
Harness side
Connector: D-26 <SINGLE CAB-RHD>
AC903877AE
Harness side
Connector: D-25 <CLUB CAB-LHD>
AC903879AC
Harness side
Connector: D-26 <CLUB CAB-RHD>
AC903885 AL
Harness side
D-25, D-26
D-25
D-26
Connectors: D-25, D-26 <DOUBLE CAB>
ETACS
CHASSIS ELECTRICAL
54A-549
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Repair the wiring harness.
STEP 5. Connector check: C-219 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the defective connector.
AC509934
Connector: C-219 <LHD>
AD
C-219 (GR)
Harness side
Junction block
AC509943
Connector: C-219 <RHD>
AB
C-219 (GR)
Harness side
Junction block
(Rear view)
ETACS
CHASSIS ELECTRICAL
54A-550
STEP 6. Check the wiring harness between C-219
ETACS-ECU connector terminal No.60 <seat belt
switch (RH-LHD) or (LH-RHD)> or No.66 <seat
belt switch (LH-LHD) or (RH-RHD)> and D-26 seat
belt switch (RH) connector or D-25 seat belt
switch (LH) connector terminal No.1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст