Mitsubishi L200. Manual — part 794
ETACS
CHASSIS ELECTRICAL
54A-543
• Malfunction of the seat belt switch (RH)
• Malfunction of the ETACS-ECU
• Damaged harness wires and connectors
ETACS
CHASSIS ELECTRICAL
54A-544
DIAGNOSIS PROCEDURE
STEP 1. Connector check: D-25 seat belt switch
(LH) connector or D-26 seat belt switch (RH)
connector
AC901130AE
Harness side
Connector: D-25 <SINGLE CAB-LHD>
AC903963AB
Harness side
Connector: D-26 <SINGLE CAB-RHD>
AC903877AE
Harness side
Connector: D-25 <CLUB CAB-LHD>
AC903879AC
Harness side
Connector: D-26 <CLUB CAB-RHD>
AC903885 AL
Harness side
D-25, D-26
D-25
D-26
Connectors: D-25, D-26 <DOUBLE CAB>
ETACS
CHASSIS ELECTRICAL
54A-545
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the defective connector.
STEP 2. Check the seat belt switch.
Refer to GROUP 52A
− Front Seat Belt .
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Replace the seat belt switch.
ETACS
CHASSIS ELECTRICAL
54A-546
STEP 3. Resistance measurement at the D-25
seat belt switch (LH) connector or D-26 seat belt
switch (RH) connector.
(1) Disconnect the connector, and measure at the
AC901130AE
Harness side
Connector: D-25 <SINGLE CAB-LHD>
AC903963AB
Harness side
Connector: D-26 <SINGLE CAB-RHD>
AC903877AE
Harness side
Connector: D-25 <CLUB CAB-LHD>
AC903879AC
Harness side
Connector: D-26 <CLUB CAB-RHD>
AC903885 AL
Harness side
D-25, D-26
D-25
D-26
Connectors: D-25, D-26 <DOUBLE CAB>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст