Mitsubishi Lancer (4A9 engine). Manual — part 11
AC808409AB
A
Parking brake lever
AC808410AD
Shift lock release
switch
PRECAUTIONS BEFORE SERVICE
GENERAL
00-41
3. Insert a screwdriver or a similar tool from the
section "A" shown in the figure. While pressing the
shift lock forced release switch, move the shift
lever.
<CVT-LHD>
1. Turn the ignition switch to the position other than
the LOCK (OFF) position.
AC
Shift lock release
button cover
2. Remove the shift lock forced release switch cover
shown in the figure. While pressing the shift lock
forced release switch with a screwdriver or a
similar tool, move the selector lever.
<CVT-RHD>
1. Turn the ignition switch to the position other than
the LOCK (OFF) position.
AC808328AB
Shift lock release
button cover
2. Remove the shift lock forced release switch cover
shown in the figure. While pressing the shift lock
forced release switch with a screwdriver or a
similar tool, move the selector lever.
PRECAUTIONS BEFORE SERVICE
GENERAL
00-42
MULTI USE TESTER (M.U.T.-III) SUB
ASSEMBLY
M1001012400301
MB991910
MB991824
MB991827
MB991826
MB991911
MB991825
AC502279
MULTI USE TESTER (M.U.T.-III) sub assembly
Vehicle communication interface (V.C.I.)
M.U.T.-III USB cable
M.U.T.-III main harness A
Do not use
M.U.T.-III main harness B
M.U.T.-III adapter harness
M.U.T.-III trigger harness
AF
Refer to the "M.U.T.-III OPERATION MANUAL" for
instructions on handling the M.U.T.-III.
PRECAUTIONS BEFORE SERVICE
GENERAL
00-43
CAUTION
Turn the ignition switch to the "LOCK" (OFF)
position before connecting or disconnecting the
M.U.T.-III.
AC608435
MB991827
MB991824
MB991910
AB
Diagnosis connector
<LH drive vehicles>
AC700191
MB991827
MB991824
AB
Diagnosis connector
<RH drive vehicles>
MB991910
Connect the M.U.T.-III to the diagnosis connector as
shown in the illustration.
HOW TO PERFORM CHASSIS NUMBER
(CHASSIS NO.) WRITING
M1001015200425
Follow the procedure below to register the Chassis No. of the Wireless Control Module (WCM) and the Key-
less Operation System (KOS).
Chassis No. is stored in the engine-ECU, WCM, and the KOS-ECU. If the Chassis No. is improperly erased,
the engine warning lamp or the keyless operation system warning indicator illuminates, and the diagnosis
code is displayed. When the engine-ECU, WCM, and the KOS-ECU are replaced, follow the procedure below
to write the Chassis No.
AC700593
OK
IMMOBI/KOS/Keyless
Special Function
Engine key Code
Reg. & Chassis No.
Registration
<When Engine-ECU is replaced>
<When WCM or KOS-ECU are replaced>
System Select
Chassis No. Registration
Coding
OK
OK
AB
System Select
IMMOBI/KOS/Keyless
Engine Key Code
Registration Completed
Chassis No. Registration
Completed
Result of Chassis No.
Registration
Chassis No. Registration
Confirmation
Engine Chassis No.
Registration
Engine Chassis No.
Registration
Confirmation
OK
OK
OK
Engine Chassis No.
Registration
Completed
Result of Engine
Chassis No.
Registration
OK
PRECAUTIONS BEFORE SERVICE
GENERAL
00-44
NOTE: Perform the variant coding of the engine-
ECU when the chassis No. or the vehicle identifica-
tion number is registered to the engine-ECU.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст