Mitsubishi Lancer (4A9 engine). Manual — part 13
PRECAUTIONS BEFORE SERVICE
GENERAL
00-49
4. Connect special tool M.U.T.-III main harness A
(MB991910) to the V.C.I.
5. Connect M.U.T.-III main harness A to the
diagnosis connector of the vehicle.
6. Turn the V.C.I. power switch to the "ON" position.
NOTE: When the V.C.I. is energised, the V.C.I.
indicator lamp will be illuminated in a green col-
our.
7. Start the M.U.T.-III system on the personal
computer and turn the ignition switch to the "ON"
position.
System Select
Select Model Year and System
System List
Model Year
Vehicle Information
Loading Option Setup
OPC
With Option
Option Name
Immobi & Keyless
KOS & Immobi
VF1
Model Name
Model Year
Model Code
Up to 2005 MY
From to 2006 MY
1
2
3
4
5
6
7
8
9
10
MPI/GDI/Diesel
IMMOBI/KOS/Keyless
AT/CVT/A-MT
ABS/ASC/ASTC
SAS
Multi Select 4WD
SRS Airbag
A/C
ETACS
Meter
AC700171
OK button
AB
8. Select "IMMOBI/KOS/Keyless" button from the
"System Select" screen. Then, select the
applicable option code item and push the OK
button.
• For vehicles with KOS, select "KOS&Immobi."
For vehicles with WCM, select "Immobi&Key-
less."
9. Select "Coding" on the next screen.
System Select
Please select function.
IMMOBI/KOS/Keyless Cording
Chassis No. Writing
AC509821
AB
10.Select "Chassis No. Writing" on "Coding" screen.
Press the OK button to execute.
Chassis No. Writing
Chassis No. currently written in Engine ECU is displayed.
Write the number displayed on the screen in Immobilizer KOS/ECU.
Chassis No. (Engine ECU)
00000000000000000
IMMOBI/KOS/Keyless Cording Chassis No. Writing
AC509822
AC
OK button
*****************
11.Push the OK button after the Chassis No. written
in the engine-ECU is displayed.
12.Push the OK button after "Chassis No. Writing will
start. Are you sure?" is displayed.
13.Push the OK button after "Completed." is
displayed.
IMMOBI/KOS/Keyless Cording Chassis No. Writing
Result of chassis No. Writing
Chassis No. Writing
00000000000000000
AC509823
*****************
AB
14.Result of Chassis No. writing is displayed.
15.Resister the other ID code. (Refer to GROUP
42B, Troubleshooting
− ID Code Registration
Judgment Table <Vehicles with KOS> or GROUP
42C, Troubleshooting
− ID Code Registration
Judgment Table <Vehicles with WCM>.)
CODING LIST
M1001015001770
CAUTION
With the ETACS functions being customised, if
any of the ETACS-ECU variant coding and option
coding items are changed, the customised con-
tents are reset. In such case, the functions need
to be recustomised.
Before troubleshooting, check that the coding data
written into the engine-ECU and ETACS-ECU are
normal. If they are not the same as the initial set-
tings, various functions and systems do not work nor-
mally.
VARIANT CODING
The coding data can be checked by operating
M.U.T.-III.
AC608435
MB991827
MB991824
MB991910
AB
Diagnosis connector
<LH drive vehicles>
AC700191
MB991827
MB991824
AB
Diagnosis connector
<RH drive vehicles>
MB991910
PRECAUTIONS BEFORE SERVICE
GENERAL
00-50
NOTE: For details on how to use the M.U.T.-III, refer
to the "M.U.T.-III operation manual."
1. Ensure that the ignition switch is at the "LOCK"
(OFF) position.
2. Start up the personal computer.
3. Connect special tool M.U.T.-III USB cable
(MB991827) to V.C.I. (MB991824) and the
personal computer.
4. Connect special tool M.U.T.-III main harness A
(MB991910) to the V.C.I.
5. Connect the M.U.T.-III main harness A to the
diagnosis connector of the vehicle.
6. Turn the V.C.I. power switch to the "ON" position.
NOTE: When the V.C.I. is energized, the V.C.I.
indicator lamp will be illuminated in a green col-
our.
7. Start the M.U.T.-III system on the personal
computer and turn the ignition switch to the "ON"
position.
8. On the system selection screen, select "MPI/GDI/
DIESEL" to check the engine-ECU data, and
"ETACS" to check the ETACS-ECU data.
9. Select "Coding."
10.Select "Coding Information & Copy."
11.If the displayed coding information is different
from the corresponding initial setting in the list,
replace the ECU with a correctly coded one. To
replace the engine-ECU, refer to GROUP 13A
−
Engine-ECU <4A9> or GROUP 13B
− Engine-
ECU <4B10, 4B11-Non-turbo> or GROUP 13C
−
Engine-ECU <4N1> or GROUP 13F
− Engine-
ECU <4J1>. To replace the ETACS-ECU, refer to
GROUP 54A
− ETACS .
ENGINE-ECU CODING DATA LIST
NOTE: The items to be displayed may differ depend-
ing on the version of the M.U.T.-III.
PRECAUTIONS BEFORE SERVICE
GENERAL
00-51
<4A9, 4B1, 4J1>
Item name
Initial value
Final gear ratio
5MT/6MT <M/T>
6.120 <CVT>
4.625 <A/T>
Tyre circumference
2015mm
IMMOBILIZER
Present
ABS
Not present <Vehicles with ASC>
Present <Vehicles without ASC>
A.S.C.
Not present <Vehicles without ASC>
Present <Vehicles with ASC>
S/W variation
No.1 or No.2
<4N1>
Item name
Initial value
Vehicle Model <LANCER>
LANCER
Vehicle Model <LANCER SPORTBACK>
LANCER SPORTBACK
OSS
Not present
Voltage of GLOW PLUG
11.0V
Material of GLOW PLUG
Ceramic
Low Temp Fuel/F stucked Spec.
Present
DRL
Present
ABS
Not present
A.S.C.
Present
Discharge Lamp
Not present or present
T/M
M/T
Final drive
2WD
FOR COLD ZONE
Not present
IMMOBILIZER
Present
Power window(DR)
Present
Power window(AS)
Not present
Power window(RR)
Not present
Power window(RL)
Not present
Power window(BK)
Not present
Sunroof
Not present or present
ASG
Present
EPS
Present
Cruise Control
Not present or present
ETACS-ECU CODING DATA LIST
NOTE: The items to be displayed may differ depend-
ing on the version of the M.U.T.-III.
PRECAUTIONS BEFORE SERVICE
GENERAL
00-52
Item name
Initial value
Vehicle line <LANCER>
LANCER
Vehicle line <LANCER SPORTBACK>
LANCER SPORTBACK
Model year
(Displays the model year)
SST oil cooling fan
Not present
Destination
EUR
Transmission <LANCER>
5MT <5M/T>
6MT <6M/T>
CVT <CVT>
4AT <A/T>
Transmission <LANCER SPORTBACK>
5MT <5M/T>
6MT <6M/T>
CVT <CVT>
Engine type <LANCER>
1.6L D4 MPI VVT <4A92>
1.8L MPI D4/S4 <4B10, 4J1>
2.0L D4 MPI VVT <4B11>
1.8L DI-DC MIVEC <4N1>
Engine type <LANCER SPORTBACK>
1.6L D4 MPI VVT <4A92>
1.8L MPI D4/S4 <4J1>
1.8L DI-DC MIVEC <4N1>
Engine power
Normal
Handle side
LHD or RHD
Chassis type for A.S.C. <LANCER>
Type 7 <Sporty suspension>
Type 9 <Except sporty suspension>
Type 10 <Vehicles for Russia>
Chassis type for A.S.C. <LANCER SPORTBACK>
Type 7 <Sporty suspension>
Type 9 <Except sporty suspension>
OSS
Not present
Final drive
Front Drive
Transfer
2WD
IG off delay control
Disabled
Dead lock operation customize
Disabled or Enable(d.twice)
After wipe customize <LANCER>
Enabled(def.D) or Enabled(def.E)
After wipe customize <LANCER SPORTBACK>
Enabled(def.E)
Tyre circumference
2015mm
Fuel tank
Not used
DRL type
Normal DRL
Smart entry system
Not present or Type B
TPMS
Not present
Keyless entry
*
Not present or Present
Airbag auto hazard
Not present
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст