Mitsubishi Outlander XL. Manual — part 832
ZC603754 0000
Screen flow of M.U.T.-III
Key Registration
(Barcode No.)*1
Key
Registration*1
Key &
KOS Key
Registration*2
Cancel
OK
OK
OK
OK
OK
OK
OK
OK
OK
Key ID input
Execution check
Barcode No.
registration
completed
Special Function
KOS key
registration
Executing
KOS key
registration
completed
Registration
result display
Key registration
Completion and
an addition?
Special Function
Special Function
Refer to GROUP 00,
How to Perform
VIN Writing.
ENG key code
Reg.*1*2
OK
Keyless ID
Reg.*1
OK
Keyless ID
registration
Executing
Keyless ID
registration
Completed
OK
OK
Steering lock
unit Reg.*2
OK
Password input
Steering lock
unit registration
Executing
OK
Antenna select
Antenna
communication
test Executing
NOTE:
*1 Show the menu displayed when the vehicles for WCM.
*2 Show the menu displayed when the vehicles for KOS.
Cancel
Steering lock
unit registration
Completed
Password input
Password input
Password input
Key registration
Completion and
an addition?
Password input
Registration
result display
Comm.
Test*2
Antenna
communication
test Completed
Additional key
registration*1
Key(Barcode No.) &
KOS Key Reg.*2
OK
OK
OK
OK
OK
OK
Key ID Input
Key registration
password
The completion of
barcode registration
KOS key
registration
password
KOS key registration
completed
Registration result
display
KOS key registration
Executing
WIRELESS CONTROL MODULE (WCM)
42C-87
ON-VEHICLE SERVICE
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
Connect the scan tool to the 16-pin data link connector
as follows.
NOTE:
For details on how to use the scan tool,
refer to the "M.U.T.-III User's Manual."
1.
Start the M.U.T.-III system on the PC and turn the
ignition switch to the "ON" position.
System Select
Select Model Year and System
System List
Model Yea r
Vehicle In fo r matio n
Loading Option Setup
OPC
With Option
Option Name
Model Name
Model Yea r
OUTLANDER
2007
Model Code
Up to 2005 MY
From to 2006 M
Y
1
2
3
4
5
6
7
8
9
10
MPI/GDI/Diesel
KOS/IMMOBI/ Keyless/TPM S
AT/CVT/A-M
T
ABS/ASC/ASTC
SAS
Multi Select 4WD
SRS Airbag
A/C
E TA C S
Meter
ZC6037850000
OK button
2.
Select "KOS/IMMO//Keyless/TPMS" button from
the "System Select" screen. Then, select the
applicable option code item and push the OK
button.
3.
Select "Special Function" on the next screen.
System Select
Please select function.
Special Function
Key Regist ratio n
Key Regist ration (Barcode N
o.)
Keyless ID Reg
.
ENG Key Code Reg .
ZC6037870000
Vehicles for WCM
K OS/IMMO/
K e yless/TPM
S
Additional ke y regist ratio n
Tire Pressure Sensor ID Che
ck
Tire Pressure Sensor ID Regist
ratio n
Tire Pressure Sensor Che
ck
4.
Select the button of the operation to be performed
from the "Special Function" screen.
⦆
"Key Registration": When the ignition key is
replaced or added as a single unit.
⦆
"Additional key registration": When the ignition
key is added as a single unit.
⦆
"Key Registration (Barcode No.)": When the
ignition key is replaced by the full service key set
or the handle lock service key set is replaced by
the piece.
⦆
"ENG key code Reg.": When the engine control
module is replaced.
⦆
"Keyless ID Reg.": When the ignition key is
replaced or added.
⦆
"Tire Pressure Sensor ID Registration": When the
TPMS transmitter is replaced.
⦆
"Tire Pressure Sensor Check": When the tire
pressure sensor data is checked.
⦆
"Tire Pressure Sensor ID Check": When the tire
pressure sensor ID is checked.
NOTE:
⦆
For "Key Code Registration," refer to GROUP 00 -
Precautions before Service P.00-26.
⦆
For "Tire Pressure Sensor ID Registration," refer
to P.42C-92.
⦆
For "Tire Pressure Sensor Check," refer to P.
42C-94.
⦆
For "Tire Pressure Sensor ID Check," refer to P.
42C-94.
KEY REGISTRATION METHOD
42C-88
WIRELESS CONTROL MODULE (WCM)
ON-VEHICLE SERVICE
ZC603850 0000
OK button
1.
When "Key registration" or "Additional key
registration" screen is displayed, enter the
password for the key registration and press the OK
button. Then, "Executing!" is displayed and the
registration process starts.
NOTE:
⦆
If the wrong password is entered consecutively 5
times, the password entry for the key registration
will be disabled for 16 minutes.
⦆
The key registration cannot be cancelled during
the operation.
ZC6038510000
Cancel button
2.
When the key registration is completed,
"Completed" is displayed. To register the next key,
follow the message on the screen and press the OK
button. Then, "Executing!" is displayed again and
the registration process for the next key starts. To
finish the key registration, press the cancel button.
NOTE:
⦆
In order to register another key consecutively
after registering the first key, the ignition switch
must be turned to the ON position with the second
key within 30 seconds after turning it to the
"LOCK" (OFF) position with the first key.
⦆
Up to eight keys can be registered.
KEY REGISTRATION (BARCODE NO.) METHOD
ZC6038520000
OK button
1.
When "Key Registration (Barcode No.)" screen is
displayed, enter the password for the key
registration and press the OK button.
NOTE:
If the wrong password is entered
consecutively 5 times, the password entry for
the key registration will be disabled for 16
minutes.
WIRELESS CONTROL MODULE (WCM)
42C-89
ON-VEHICLE SERVICE
ZC6038530000
ZC6038480000
Barcode
2.
Follow the message on the screen to enter the bar
code No., and then press the OK button.
3.
When "Do you want to start registration?" is
displayed, press the OK button to start the
registration, or press the Cancel button to cancel
the registration.
4.
"Key Registration was completed" is displayed.
Press the OK button to finish the registration.
"KEYLESS ID REG." METHOD
ZC6037580000
OK button
1.
On the "Keyless ID Reg." screen, enter the
password and press the OK button.
2.
Register within 1 minute and send the programming
packet*to register the keyless ID. To register
multiple keys, register the next key within 1 minute
from the registration operation of previous key.
Complete the registration of necessary keys, then
press the OK button to finish the keyless ID
registration.
NOTE:
⦆
Up to eight ignition keys can be registered.
⦆
*: Programming packet sending procedure
Complete the following steps 1 to 3 within four
seconds.
1.
Press and hold both the lock and the unlock
switch for 1 second or longer.
2.
Release both the lock and the unlock switch
for 0.5 second or longer.
3.
Press the unlock switch.
3.
Push the OK button after "Keyless ID Registration
was finished." is displayed.
IMMOBI
K e yles s
K O S
Special Function
K e yless ID Regist
r atio n
Item
Keyless ID Regist
ratio n
Registered N o. Status
Pas sw or d
W ork of regist ratio n
Completed
Che c k the
n umber of regist
r ation .
ZC6037570000
4.
Check number of the keyless IDs registered.
42C-90
WIRELESS CONTROL MODULE (WCM)
ON-VEHICLE SERVICE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст