Mitsubishi Outlander XL. Manual — part 843
Windshield wiper linked with washer function Initial condition: with function, with windshield washer
check valve
ZC5012810000
t
t
T
T
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Windshield wiper
auto stop signal
Windshield washer relay
Windshield washer switch
Windshield wiper
drive signal
Wiper switch in
off position
Wiper switch in intermittent
operation position
t: 0.3 second
T: Intermittent wiper intermittent time
Wiper switch
OFF position
Intermittent operation position
Low-speed
or
high-speed
operation
position
Washer switch ON
time(t)
0.3
second
or less
0.3
to
0.5
second
0.5
second
or more
0.2
second
or less
0.2 to
0.4
second
0.4
to
0.6
second
0.6
second
or more
-
T
0
second
2
seconds
3
seconds
0
second
1
second
2
seconds
3
seconds
3 seconds
When the windshield washer switch on the column
switch is turned ON while the ignition switch is in ACC
or ON position, ETACS turns the windshield washer
relay ON.
When the windshield washer switch is kept ON for 0.3
seconds or longer, the windshield wiper drive signal
(the wiper drive signal output time varies depending
on the conditions. For details, see the table.) is turned
ON, and the windshield wiper operates at high speed.
The windshield wiper is turned OFF with 3 seconds
delay after the windshield washer switch is turned
OFF.
Even when the windshield washer switch is turned ON
while the windshield wiper is operating intermittently,
the intermittent action starts again after the linked
operation is finished.
If the ignition switch is turned to ACC position while
the windshield washer switch is ON, the windshield
washer relay turns ON, but the windshield wiper does
not perform the linked operation. When the windshield
washer switch is turned OFF and then ON, the
windshield wiper starts the linked operation.
NOTE:
⦆
Using the customization function, the washer linked
windshield wiper function can be invalidated. (Refer
to P.51B-48.)
⦆
Using the customization function, when the washer
linked windshield wiper function is invalidated, only
the washer operates. It is useful to melt ice on a
frozen windshield.
WIPER AND WASHER
51B-5
GENERAL INFORMATION
REAR WIPER AND WASHER: DESCRIPTION OF CONSTRUCTION AND OPERATION
Rear wiper control [Initial condition: 8 seconds (without successive operations)]
ZC5013040000
t
ON
OFF
ON
OFF
ON
OFF
T2
T3
T2
T3
T1
T4
T4
T1
T4
T4
T4
T3
T2
T2
T2
T2: 7.4 seconds
Rear wiper drive signal
Rear wiper switch
Inhibitor switch "R" position
T1: 3.0 seconds
t: 1.0 second
T3: 8.0 seconds
T4: 0.6 second
1.
When the rear wiper switch on the column switch
is turned ON while the ignition switch is in ACC or
ON position, ETACS turns the rear wiper drive
signal ON for 3 seconds (for approximately 2
cycles) and operates the intermittent action in 8
seconds interval.
When the selector lever is moved to R (reverse)
position during the rear wiper operation, the
transmission range switch R (reverse) turns ON,
and one second after that, ETACS turns the rear
wiper drive signal ON for 3 seconds (for
approximately 2 cycles), and operates the
intermittent action in 8 seconds interval again.
2.
By the special operation of the rear wiper switch
on the column switch (2 consecutive operations),
the rear wiper can operate continuously regardless
on the set intermittent time.
NOTE:
Using the customization function, the rear
wiper intermittent time can be adjusted. (Refer
to P.51B-48.)
Rear wiper linked with washer function Initial condition: with function
ZC5013050000
t : 0.3 second
T4 : 0.6 second
T1 : 3 seconds
T2 : 7.4 seconds
T3 : 8 seconds
t
t
t
ON
OFF
ON
OFF
ON
OFF
T1
T1
T1
T2
T3
T4
T4
Rear wiper switch
in OFF position
Rear wiper switch in ON position
Rear washer switch
Rear washer relay
Rear wiper drive
signal
When the rear washer switch on the column switch is
turned ON while the ignition switch is in ACC or ON
position, ETACS turns the rear washer relay ON.
51B-6
WIPER AND WASHER
GENERAL INFORMATION
The rear washer relay turns ON after the rear washer
switch has been ON for 0.3 seconds, then turns the
rear wiper drive signal ON to operate the rear wiper
simultaneously. When the rear washer switch is
turned OFF, after 3 seconds the rear wiper is turned
OFF.
If the rear washer switch is turned ON during the rear
wiper operation, 7.4 seconds after turning OFF the
rear wiper drive signal turns OFF, the intermittent
action is resumed in 8 seconds interval.
NOTE:
Using the customization function, the
washer linked rear wiper function can be
invalidated. (Refer to P.51B-48.)
SPECIFICATION(S)
SERVICE SPECIFICATION
M15102100001USA0000010000
Item
Standard value
Stop position of the windshield wiper arm/blade assembly mm(in)
Φ 2(0.08) marking ± 5(0.20)
Stop position of rear wiper arm/blade assembly (Distance from the edge
of the wiper blade to the edge of the ceramic line on the liftgate glass) mm
(in)
0 to 20(0.79) from edge of the
ceramic line
LUBRICANT
M15102100002USA0000010000
Item
Specified lubricant
Quantity
Wiper motor link rod
Contact joint between
link rod and wiper motor
link plate
Multipurpose grease SAE J310,
NLGI No.1(mineral oil + Li) or
equivalent
As required
WIPER AND WASHER
51B-7
SPECIFICATION(S)
SPECIAL TOOL
M15102100003USA0000010000
Tool
Tool number and
name
Supersession
Application
MB991910
MB991826
YB9919580000
MB991911
MB991914
MB991824
MB991827
MB991825
Do not use
Do not use
a
b
c
d
e
f
g
MB991958
a.
MB991824
b.
MB991827
c.
MB991910
d.
MB991911
e.
MB991914
f.
MB991825
g.
MB991826
M.U.T.-III
sub
assembly
a.
Vehicle
communication
interface (V.C.I.)
b.
M.U.T.-III
USB
cable
c.
M.U.T.-III
main
harness
A
(Vehicles
with
CAN
communication
system)
d.
M.U.T.-III
main
harness
B
(Vehicles without
CAN
communication
system)
e.
M.U.T.-III
main
harness C (for
Daimler Chrysler
models only)
f.
M.U.T.-III
measurement
adapter
g.
M.U.T.-III trigger
harness
MB991824-KIT
NOTE:
G: MB991826
M.U.T.-III Trigger
Harness is not
necessary when
pushing V.C.I. ENTER
key.
M.U.T.-III main harness A
(MB991910) should be used.
M.U.T.-III main harness B and C
should not be used for this
vehicle.
Windshield wiper intermittent time
check
51B-8
WIPER AND WASHER
SPECIAL TOOL
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст