Mitsubishi Outlander XL. Manual — part 56
VEHICLE WASHING
M10001000120USA0000010000
ZC501232
Approximately
40 cm (16 in)
0000
If high-pressure car-washing equipment or steam car-washing
equipment is used to wash the vehicle, be sure to maintain the
spray nozzle at a distance of at least approximately 40cm (16
inches) from any plastic parts and all opening parts (doors,
luggage compartment, etc.).
APPLICATION OF ANTI-CORROSION AGENTS
AND UNDERCOATS
M10001000110USA0000010000
Be careful not to apply oil or grease to the heated oxygen sensor.
If applied, the sensor may malfunction. Protect the heated
oxygen sensor with a cover before applying anti-corrosion agent,
etc.
SCAN TOOL (MULTI USE TESTER { M.U.T.-III } SUB ASSEMBLY)
M10001000122USA0000010000
Turn the ignition switch to the "LOCK" (OFF)
position before disconnecting or connecting the
scan tool.
NOTE:
M.U.T.-III trigger harness is not necessary
when pushing V.C.I. ENTER key.
GENERAL <BODY AND CHASSIS>
00-33
PRECAUTIONS BEFORE SERVICE
ZC501929
MB991910
MB991826
MB991911
MB991825
MB991824
MB991827
MB991914
Vehicle communication interface (V.C.I)
M.U.T.-lll main harness B
M.U.T.-lll trigger harness
M.U.T.-lll main harness C
M.U.T.-lll measurement adapter
M.U.T.-lll USB cable
M.U.T.-lll main harness A
0000
Do not use
Do not use
CODING LIST
M10001000147USA0000010000
Before troubleshooting, check that the coding data written into
the engine control module and ETACS-ECU are normal. If they
are not the same as the initial settings, various functions and
systems will not work correctly.
VARIANT CODING
Required Special Tools:
｠
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
｠
MB991824: Vehicle Communication Interface (V.C.I.)
｠
MB991827: M.U.T.-III USB Cable
｠
MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
The items marked with*3are actually installed to a vehicle
but their initial settings are "Not present." This is because
the items do not adapt CAN, and does not indicate abnormal
coding data.
00-34
GENERAL <BODY AND CHASSIS>
PRECAUTIONS BEFORE SERVICE
The coding data can be checked by operating scan tool
MB991958.
NOTE:
For details on how to use the scan tool MB991958,
refer to the "M.U.T.-III Owner’s manual".
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
1.
Ensure that the ignition switch is at the "LOCK" (OFF) position.
2.
Start up the personal computer.
3.
Connect special tool MB991827 to special tool MB991824 and
the personal computer.
4.
Connect special tool MB991910 to special tool MB991824.
5.
Connect special tool MB991910 to the data link connector.
6.
Turn the power switch of special tool MB991824 to the "ON"
position.
NOTE:
When special tool MB991824 is energized, special
tool MB991824 indicator light will be illuminated in a
green color.
7.
Start the "M.U.T.-III system" on the personal computer.
8.
Turn the ignition switch to the "ON" position.
9.
Select "System select" from the start-up screen.
10.
Select "From 2006 MY" under "Model Year". Check that
"Vehicle Information" contents are correct.
11.
On the system list screen, select "GasolineENG" to check the
engine control module data, and "ETACS" to check the
ETACS-ECU data.
NOTE:
｠
If "Loading Option Setup" list is shown, click appropriate
box.
｠
When you select "GasolineENG" system, a selection
screen appears asking whether MITSUBISHI. Select a
button that the engine belongs to.
12.
Select "Coding."
13.
Select "Coding Information."
14.
If the displayed coding information is different from the
corresponding initial setting in the list, replace the ECU with
a correctly coded one. For replacement of the engine control
module, refer to GROUP 13Aa, engine control module P.
13Aa-37. For replacement of the ETACS-ECU, refer to
GROUP 54Ad, ETACS P.54Ad-93.
ENGINE CONTROL MODULE CODING DATA LIST
Item name
Initial value
Vehicle Model
OUTLANDER
Model year
(Displays the model year)
Destination
U.S.
Detail Destination
USA (49STATES)
Transmission
6AT
GENERAL <BODY AND CHASSIS>
00-35
PRECAUTIONS BEFORE SERVICE
Item name
Initial value
Engine type
S4 MIVEC
Engine power
Normal
Final drive
FWD or AWD
Final gear ratio
6.466
T/M Type
SPORTS MODE
Fuel cut Maximum Speed
210 km/h
Tire circumference
2124mm
IMMOBILIZER
Present
TCM
Present
ABS
Present or Not present
ASC
Present or Not present
Power window Dr
Present
Power window As
Not present
Power window RR
Not present
Power window RL
Not present
Power window RP
Not present
Sunroof
Sunroof not present or Sunroof present
S/W variation
Variation No.1
ETACS-ECU CODING DATA LIST
Item name
Initial value
Vehicle line
OUTLANDER
Model year
(Displays the model year)
Destination
U.S.
Transaxle
6AT
Engine type
S4 MIVEC
Engine power
Normal
Handle side
LHD
Final drive
Front Drive or AWD FF Base
Transfer
FWD or ECC
Tire size
225/55R18 or 215/70R16
Tire circumference
2155mm
Fuel tank
60L
DRL*1
Dimming DRL W/P or Independent DRL/P
Smart entry system
Not present or Type C
TPMS*1
Present
Keyless entry*2
Present
SKIM
Type B
Cruise control
Present
00-36
GENERAL <BODY AND CHASSIS>
PRECAUTIONS BEFORE SERVICE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст