Mitsubishi Outlander XL. Manual — part 1028
ZC601807
Vertical adjustment
0000
ZC603103 0000
Vertical
direction
2.
If it is not within the standard value range, adjust by turning
the adjusting screw.
NOTE:
The horizontal direction is non-adjustable. If
deviation of the light beam axis exceeds the standard value,
check that the mounting location or some other points are
not faulty.
BULB REPLACEMENT
M15410900019USA0000010001
ZC3064260000
Fog light
Bolt
Fog light bracket
1.
Remove the bolt under the fog light bracket and tilt the fog light
to ease the bulb pulling-out.
ZC303432
Fog light bulb
0000
Don't touch the bulb surface with bare hands or dirty
gloves. If the bulb surface (glass part) gets dirty, clean it
with alcohol or thinner immediately and dry well, and then
install it.
2.
Disconnect the connector and withdraw the bulb.
3.
Replace the bulb, and connect securely the connector.
LIGHTING
54Ac-185
FOG LIGHT
REMOVAL AND INSTALLATION
M15410900170USA0000010000
ZC601887AA00
4.5 ± 1.5 N·m
40 ± 13 in-lb
0.9 ± 0.1 N·m
8 ± 1 in-lb
4
3
1
5
2
Removal steps
·
Engine room under cover front (Refer
to GROUP 51A - Under Cover P.
51A-18.)
1.
Fog light bezel
2.
Fog light assembly
Removal steps
3.
Bulb
4.
Fog light unit
5.
Fog light bracket
54Ac-186
LIGHTING
FOG LIGHT
INSPECTION
FOG LIGHT RELAY CHECK
M15410900171USA0000010000
ZC603675
2
3
4
1
0001
Fog light relay
Fog light relay
A-14X
Battery voltage
Terminal
number
Normal
condition
Not energized
3 - 4
No
continuity
With
current
supply
[terminal 1 (+), terminal 2
(-)]
Continuity
exists (2 Ω
or less)
DAYTIME RUNNING LIGHT
ON-VEHICLE SERVICE
BULB REPLACEMENT
M15410900019USA0000010002
ZC6032100000
Daytime running
light bulb
Don't touch the bulb surface with bare hands or dirty
gloves. If the bulb surface (glass part) gets dirty, clean it
with alcohol or thinner immediately and dry well, and then
install it.
1.
Disconnect the daytime running light code and withdraw the
bulb.
2.
Replace the bulb, and connect securely the daytime running
light code.
LIGHTING
54Ac-187
DAYTIME RUNNING LIGHT
REMOVAL AND INSTALLATION
M15410900178USA0000010000
ZC603182AA00
5
4.5 ± 1.5 N·m
40 ± 13 in-lb
0.9 ± 0.1 N·m
8 ± 1 in-lb
4
3
6
1
2
Removal steps
·
Engine room under cover front (Refer
to GROUP 51A - Under Cover P.
51A-18.)
1.
Daytime running light assembly
2.
Daytime running light cord
Removal steps
3.
Bulb
4.
Daytime running light unit
5.
Fog light bezel
6.
Fog light bracket
54Ac-188
LIGHTING
DAYTIME RUNNING LIGHT
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст