Mitsubishi Outlander XL. Manual — part 730
Diagnostic trouble code
No.
Diagnostic item
Reference page
L0750
P/W (DR) Position read fail
NOTE:
P/W: Abbreviation of power Window
TROUBLE SYMPTOM CHART <POWER WINDOW>
M14203000070USA0000010000
During diagnosis, a diagnostic trouble code
associated with other system may be set when the
ignition switch is turned on with connector(s)
disconnected. On completion, check all systems
for diagnostic trouble code(s). If diagnostic
trouble code(s) are set, erase them all.
Trouble symptom
Inspection
procedure
number
Reference
page
Power windows do not work at all.
C-1
Driver's power window does not work by means of the power window main
switch.
C-2
Relevant power window(s) does not work by means of the front and rear
passenger's power window sub switches.
C-3
Front and/or rear passenger's power window(s) do not work by means of the
power window main switch.
C-4
The power window timer function does not work normally.
C-5
Power window anti-trap function does not work normally.
C-6
The window glass lowers automatically while it is rising.
C-7
DIAGNOSTIC TROUBLE CODE PROCEDURES
CODE NO. L0730 P/W (DR) SW pulse 1 disconnection
M14203000932USA0000010000
Before replacing the ECU, ensure that the input
and output signal circuits are normal.
DOOR
42Ab-39
POWER WINDOW DIAGNOSIS
ZC601368
GREEN-WHITE
GREEN
ORANGE
ORANGE
VIOLET
BLA
CK
BLA
CK
POWER WINDOW MAIN SWITCH
FRONT
POWER
WINDOW
MOTOR (LH)
FRONT
(LH)
CPU
LIN DRIVE
CIRCUIT
IC
IC
BLA
CK-YELLO
W
0000
Driver’s Power Window Circuit
ZC600881
Connectors: E-16, E-19
E-19
E-16 (GR)
0003
COMMENTS ON TROUBLE SYMPTOM
If the pulse 1 signal from the front power window motor
(LH) cannot be received, the power window main
switch sets the diagnosis trouble code No. L0730.
PROBABLE CAUSES
⦆
Malfunction of the front power window motor (LH)
⦆
Malfunction of the power window main switch
⦆
Damaged wiring harness and connectors
DIAGNOSTIC PROCEDURE
STEP 1. Check power window main switch connector E-19,
front power window motor (LH) connector E-16 for loose,
42Ab-40
DOOR
POWER WINDOW DIAGNOSIS
corroded or damaged terminals, or terminals pushed back
in the connector.
Q:Are power window main switch connector E-19, front
power window motor (LH) connector E-16 in good
condition?
YES:
Go to Step 2.
NO:
Repair or replace the damaged component(s). Refer to
GROUP 00E, Harness Connector Inspection P.00E-2. Verify
that the power window works normally.
STEP 2. Check the wiring harness between power window
main switch connector E-19 (terminals 8, 9 and 12) and front
power window motor (LH) connector E-16 (terminals 3, 5
and 6).
Q:Is the wiring harness between power window main switch
connector E-19 (terminals 8, 9 and 12) and front power
window motor (LH) connector E-16 (terminals 3, 5 and 6)
in good condition?
YES:
Go to Step 3.
NO:
The wiring harness may be damaged or the connector
(s) may have loose, corroded or damaged terminals, or
terminals pushed back in the connector. Repair the wiring
harness as necessary. Verify that the power window works
normally.
STEP 3. Diagnostic trouble code recheck
Replace the front power window motor (LH). Recheck if the
diagnostic trouble code is set.
(1)
Erase the diagnostic trouble code.
(2)
Operate the driver’s door window switch on the power
window main switch.
(3)
Check if the diagnostic trouble code is set.
Q:Is the diagnostic trouble code set?
YES:
Replace the power window main switch.
NO:
The procedure is complete. Verify that the power
window works normally.
CODE NO. L0732 P/W (DR) SW pulse 2 disconnection
M14203000933USA0000010000
Before replacing the ECU, ensure that the input
and output signal circuits are normal.
DOOR
42Ab-41
POWER WINDOW DIAGNOSIS
ZC601368
GREEN-WHITE
GREEN
ORANGE
ORANGE
VIOLET
BLA
CK
BLA
CK
POWER WINDOW MAIN SWITCH
FRONT
POWER
WINDOW
MOTOR (LH)
FRONT
(LH)
CPU
LIN DRIVE
CIRCUIT
IC
IC
BLA
CK-YELLO
W
0000
Driver’s Power Window Circuit
ZC600881
Connectors: E-16, E-19
E-19
E-16 (GR)
0003
COMMENTS ON TROUBLE SYMPTOM
If the pulse 2 signal from the front power window motor
(LH) cannot be received, the power window main
switch sets the diagnosis trouble code No. L0732.
PROBABLE CAUSES
⦆
Malfunction of the front power window motor (LH)
⦆
Malfunction of the power window main switch
⦆
Damaged wiring harness and connectors
DIAGNOSTIC PROCEDURE
STEP 1. Check power window main switch connector E-19,
front power window motor (LH) connector E-16 for loose,
42Ab-42
DOOR
POWER WINDOW DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст