Mitsubishi Montero (2004+). Manual — part 127
ON-VEHICLE SERVICE
TSB Revision
ENGINE LUBRICATION
12-5
8. Apply the specified sealant 3M
AAD Part number 8672 or
equivalent to thread of the engine oil pressure switch.
CAUTION
Do not start the engine within one hour after the engine oil
pressure switch has been installed.
9. Use special tool MD998054 to tighten the engine oil
pressure switch to the specified torque.
Tightening torque: 10
± 2 N⋅m (87 ± 17 in-lb)
10.Install the engine oil pressure switch terminal.
AKX00295 AB
AKX00294
MD998054
AB
ENGINE OIL COOLER
TSB Revision
ENGINE LUBRICATION
12-6
ENGINE OIL COOLER
REMOVAL AND INSTALLATION
M1121001300064
Pre-removal Operation
• Skid Plate Under Cover Removal
• Radiator Shroud Lower Cover Removal (Refer to GROUP
Post-installation Operation
• Skid Plate Under Cover Installation
• Radiator Shroud Lower Cover Installation (Refer to
GROUP 14, Radiator
• Engine Oil Refilling and Level Check (Refer to
.)
AC001605
N
N
N
1
1
2
3
4
5
6
12 ± 2 N·m
102 ± 22 in-lb
12 ± 2 N·m
102 ± 22 in-lb
48 ± 7 N·m
36 ± 5 ft-lb
43 ± 2 N·m
32 ± 1 ft-lb
5.0 ± 1.0 N·m
45 ± 9 in-lb
5.0 ± 1.0 N·m
45 ± 9 in-lb
AB
REMOVAL STEPS
1. OIL COOLER HOSE CONNECTION
A/T COOLER SIDE
2. OIL COOLER ASSEMBLY
3. BRACKET
4. EYE BOLTS
5. OIL COOLER RETURN HOSE
6. OIL COOLER FEED HOSE
REMOVAL STEPS (Continued)
SPECIFICATIONS
TSB Revision
ENGINE LUBRICATION
12-7
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
M1121002200316
SERVICE SPECIFICATIONS
M1121000300221
SEALANT
M1121000500225
LUBRICANT
M1121000400518
.
ENGINE OIL
CAUTION
Never use nondetergent or straight mineral oil.
Use only engine oils displaying the ILSAC certification mark
("Starburst" symbol) on the container.
ITEM
SPECIFICATION
Engine oil pan drain plug
39
± 5 N⋅m (29 ± 3 ft-lb)
Engine oil pressure switch
10
± 2 N⋅m (87 ± 17 in-lb)
Engine oil cooler
Oil cooler bolt
12
± 2 N⋅m (102 ± 22 in-lb)
Oil cooler bracket bolt
5.0
± 1.0 N⋅m (45 ± 9 in-lb)
Oil cooler eye bolt
48
± 7 N⋅m (36 ± 5 ft-lb)
Oil cooler hose bolt
43
± 2 N⋅m (32 ± 1 ft-lb)
Oil cooler hose bracket bolt
12
± 2 N⋅m (102 ± 22 in-lb)
ITEM
STANDARD VALUE
Engine oil pressure kPa (psi)
at idle
29 (4.2) or more
at 3,500 r/min
294
− 686 (43 − 100)
ITEM
SPECIFIED SEALANT
Engine oil pressure switch
3M
AAD Part No. 8672 or equivalent
ITEM
ENGINE OIL
QUANTITY dm
3
(qt)
Oil cooler
Engine oils displaying ILSAC certification
symbol ("Starburst" symbol) or conforming
to the API classification SJ EC or SJ/CD
EC
0.3 (0.32)
Oil filter
0.3 (0.32)
Total quantity
4.9 (5.14)
ACX00394AI
ILSAC CERTIFICATION MARK
("STARBURST" SYMBOL)
SPECIFICATIONS
TSB Revision
ENGINE LUBRICATION
12-8
If these oils are not available, an API classification SJ EC or
SJ/CD EC can be used.
ACX00886 AB
API SERVICE SYMBOL
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст