Mitsubishi Outlander GS45X. Manual — part 1666
TRANSAXLE
TSB Revision
CONTINUOUSLY VARIABLE TRANSAXLE OVERHAUL
23B-53
34.Install the valve body harness on the control valve.
35.Install the control valve assembly on the transaxle case as
follows:
(1) Insert pins etc. (
φ3 mm) into linkage stopper holes of the
control valve assembly to fix the pulley ratio linkage.
AK502233
AK502225AD
Pulley ratio linkage
Pin
TRANSAXLE
TSB Revision
CONTINUOUSLY VARIABLE TRANSAXLE OVERHAUL
23B-54
(2) Install the terminal body on the transaxle case, while
aligning the detent of terminal body with the transaxle
case as shown in the diagram.
AK502274AD
Stopper
TRANSAXLE
TSB Revision
CONTINUOUSLY VARIABLE TRANSAXLE OVERHAUL
23B-55
CAUTION
Align the notch of pulley ratio linkage with the prong of
pulley sensor.
(3) Slide the control valve assembly from the bottom, and
install it on the transaxle case.
CAUTION
Apply transmission fluid when attaching the bush.
(4) Install the bush on the control valve assembly.
AKA00546
AK502275
Notch
Protrusion
AD
AK502276
TRANSAXLE
TSB Revision
CONTINUOUSLY VARIABLE TRANSAXLE OVERHAUL
23B-56
(5) Install the fastening bolts of control valve assembly and
tighten the bolt to the specified torque.
Tightening torque: 7.9 N
⋅m (70 in-lb)
36.Install the manual lever and tighten the bolt to the specified
torque.
Tightening torque: 22.1 N
⋅m (16 ft-lb)
37.Install the bracket on the control valve assembly and tighten
the bolt to the specified torque.
Tightening torque: 7.9 N
⋅m (70 in-lb)
CAUTION
• Do not re-use the O-ring.
• Apply transmission fluid when installing the O-ring.
38.Install the O-ring on the oil strainer.
Bolt symbol
A
B
Shank length mm
54
44
Quantity
10
1
AK502226AD
A
A
A
A
A
A
A
A
A
A
B
AK502224AD
AK502223AD
AK502277
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст