Mitsubishi Outlander GS45X. Manual — part 1667
TRANSAXLE
TSB Revision
CONTINUOUSLY VARIABLE TRANSAXLE OVERHAUL
23B-57
39.Install the oil strainer and tighten the bolt to the specified
torque.
Tightening torque: 7.9 N
⋅m (70 in-lb)
CAUTION
• Do not re-use the oil pan gasket.
• Remove any moisture, oil, and used gasket from the
mounting surface of oil pan gasket.
• When installing the oil pan gasket, align the dowel pins
of transaxle case with dowel pin holes A of the oil pan
gasket.
40.Install the oil pan gasket on the transaxle case.
41.Install the magnet on the oil pan.
CAUTION
When installing the oil pan, align the dowel pins of tran-
saxle case with dowel pin holes A of the oil pan.
42.Install the oil pan on the transaxle case and tighten the bolts
to the specified torque.
Tightening torque: 7.9 N
⋅m (70 in-lb)
CAUTION
Do not re-use the drain plug gasket.
43.Install the drain plug and drain plug gasket on the transaxle
case and tighten the bolt to the specified torque.
Tightening torque: 34.3 N
⋅m (25 ft-lb)
Bolt symbol
A
B
C
Shank length mm
12
44
12
Quantity
1
1
1
AK502222AD
C
B
A
AK502278AE
Oil pan gasket
A
A
AK502220
A
AD
TRANSAXLE
TSB Revision
CONTINUOUSLY VARIABLE TRANSAXLE OVERHAUL
23B-58
44.Install the oil pump cover on the transaxle case, and fix the
fastening bolts temporarily.
45.Install the baffle plate, and fix the fastening bolts
temporarily.
46.Install the oil guide and tighten the bolt to the specified
torque.
Tightening torque: 5.9 N
⋅m (52 in-lb)
47.Install the bracket, and tighten the fastening bolts of the
bracket to the bolts to the specified torque.
Tightening torque: 26 N
⋅m (19 ft-lb)
48.Tighten the fastening bolts of the oil pump cover and baffle
plate to the bolts to the specified torque.
Tightening torque: 19 N
⋅m (14 ft-lb)
AK502217AD
AK502216AE
AK502215AE
AK502214AD
TRANSAXLE
TSB Revision
CONTINUOUSLY VARIABLE TRANSAXLE OVERHAUL
23B-59
CAUTION
• Make sure the tang of thrust washer is aligned with the
mounting hole of oil pump cover.
• Apply vaseline when installing the thrust washer.
49.Install the thrust washer on the oil pump cover.
CAUTION
Pull the driven sprocket up softly to make sure it is
securely attached.
50.Expand the snap ring, and install the driven sprocket, oil
pump chain, and drive sprocket.
51.Install the chain cover, and tighten the fastening nuts to the
specified torque.
Tightening torque: 5.9 N
⋅m (52 in-lb)
AK502210AD
AK502208AD
Snap ring
AK502209AE
Driven sprocket
Oil pump chain
Drive
sprocket
AK502207AE
TRANSAXLE
TSB Revision
CONTINUOUSLY VARIABLE TRANSAXLE OVERHAUL
23B-60
CAUTION
• Do not re-use the O-ring.
• Apply transmission fluid when installing the O-ring.
52.Install the O-ring on the input shaft.
53.Install the differential assembly on the transaxle case.
54.Install the reduction gear assembly on the transaxle case.
AK502206AF
AK605044
<F1CJA>
AC
AK502213
<W1CJA>
AD
AK502212
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст