Mitsubishi Outlander GS45X. Manual — part 95
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-377
STEP 1. ETACS-ECU coding data check.
(1) Operate the scan tool to read the ETACS-ECU option
coding information. (Refer to GROUP 00, Coding List
(2) Check that the "Number of speaker" is set to "6 speakers".
Q: Is the check result normal?
YES : Go to Step 2.
NO : Operate the scan tool to set the option coding
"Number of speaker" to "6 speakers", and check the
trouble symptom.
STEP 2. Checking with speaker test.
Perform the speaker test, and check which speaker does not
output the sound. Refer to
.
Q: Is the check result normal?
YES <normal for all> : The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to use
Troubleshooting/inspection Service Points
− How to
Cope with Intermittent Malfunction
NO <abnormal for all> : Go to Step 27.
NO <only front door speaker (RH) is abnormal> : Go to
Step 3.
NO <only front door speaker (LH) is abnormal> : Go to
Step 7.
NO <only rear door speaker (RH) is abnormal> : Go to
Step 11.
NO <only rear door speaker (LH) is abnormal> : Go to
Step 15.
NO <only tweeter (RH) vehicles with 6 speakers is
abnormal> : Go to Step 19.
NO <only tweeter (LH) vehicles with 6 speakers is
abnormal> : Go to Step 23.
ZC501967
AC404789
AC702802
MB991824
MB991827
MB991910
Data link
connector
AB
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-378
STEP 3. Check front door speaker (RH) connector E-04 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is front door speaker (RH) connector E-04 in good
condition?
YES : Go to Step 4.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
STEP 4. Front door speaker (RH) check.
(1) Remove the front door speaker (RH). Refer to
(2) Check that the front door speaker (RH) outputs the noise
when the voltage of five volts is applied to the front door
speaker (RH) connector terminal.
Q: Does the front door speaker (RH) output the noise?
YES : Go to Step 5.
NO : Replace the front door speaker (RH).
STEP 5. Check radio and CD player connector C-16 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is radio and CD player connector C-16 in good
condition?
YES : Go to Step 6.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
AC703723AB
5 volts
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-379
STEP 6. Check the wiring harness between radio and CD
player connector C-16 (terminal 26, 36) and front door
speaker (RH) connector E-04 (terminal 1, 2).
NOTE: Also check intermediate connector C-112 for loose, cor-
roded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connector C-112 is damaged, repair
or replace the connector as described in GROUP 00E, Harness
Connector Inspection
.
• Check the communication lines for open circuit and short
circuit.
Q: Is the wiring harness between radio and CD player
connector C-16 (terminal 26, 36) and front door speaker
(RH) connector E-04 (terminal 1, 2) in good condition?
YES : Check the trouble symptom. Go to Step 27.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.
STEP 7. Check front door speaker (LH) connector E-17 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is front door speaker (LH) connector E-17 in good
condition?
YES : Go to Step 8.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
STEP 8. Front door speaker (LH) check.
(1) Remove the front door speaker (LH). Refer to
(2) Check that the front door speaker (LH) outputs the noise
when the voltage of five volts is applied to the front door
speaker (LH) connector terminal.
Q: Does the front door speaker (LH) output the noise?
YES : Go to Step 9.
NO : Replace the front door speaker (LH).
AC703723AB
5 volts
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-380
STEP 9. Check radio and CD player connector C-16 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is radio and CD player connector C-16 in good
condition?
YES : Go to Step 10.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
STEP 10. Check the wiring harness between radio and CD
player connector C-16 (terminal 28, 38) and front door
speaker (LH) connector E-17 (terminal 1, 2).
NOTE: Also check intermediate connector C-126 for loose, cor-
roded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connector C-126 is damaged, repair
or replace the connector as described in GROUP 00E, Harness
Connector Inspection
.
• Check the communication lines for open circuit and short
circuit.
Q: Is the wiring harness between radio and CD player
connector C-16 (terminal 28, 38) and front door speaker
(LH) connector E-17 (terminal 1, 2) in good condition?
YES : Check the trouble symptom. Go to Step 27.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.
STEP 11. Check rear door speaker (RH) connector E-10 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is rear door speaker (RH) connector E-10 in good
condition?
YES : Go to Step 12.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст