Mitsubishi Outlander GS45X. Manual — part 508
12-1
GROUP 12
ENGINE
LUBRICATION
CONTENTS
GENERAL INFORMATION . . . . . . . .
LUBRICANTS . . . . . . . . . . . . . . . . . .
SERVICE SPECIFICATIONS. . . . . . .
SEALANT. . . . . . . . . . . . . . . . . . . . . .
SPECIAL TOOLS. . . . . . . . . . . . . . . .
ON-VEHICLE SERVICE. . . . . . . . . . .
ENGINE OIL CHECK . . . . . . . . . . . . . . . . .
ENGINE OIL REPLACEMENT . . . . . . . . . .
ENGINE OIL FILTER REPLACEMENT. . . .
OIL FILTER STUD REPLACEMENT
<3.0L ENGINE>. . . . . . . . . . . . . . . . . . . . . .
ENGINE OIL PRESSURE CHECK . . . . . . .
ENGINE OIL PRESSURE SWITCH . .
REMOVAL AND INSTALLATION
<2.4L ENGINE>. . . . . . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION
GENERAL INFORMATION
TSB Revision
ENGINE LUBRICATION
12-2
GENERAL INFORMATION
M1121000101037
The lubrication method is a fully force-fed, full-flow fil-
tration type.
ENGINE OILS
WARNING
Prolonged and repeated contact with mineral
oil will result in the removal of natural fats
from the skin, leading to dryness, irritation
and dermatitis. In addition, used engine oil
contains potentially harmful contaminants
which may cause skin cancer. Adequate
means of skin protection and washing facili-
ties must be provided.
.
Recommended Precautions
The most effective precaution is to prevent, as far as
practical, the risk of skin contact with mineral oils i.e.
use enclosed systems for handling used engine oil
and degrease components, where practical, before
handling them.
.
Other precautions:
• Avoid prolonged and repeated contact with oil,
particularly used engine oil.
• Wear protective clothing, including impervious
gloves where practical.
• Avoid contaminating clothes with oil.
• Do not put oily rags in pockets.
• Do not wear heavily soiled clothing and
oil-soaked foot-wear. Overalls must be cleaned
regularly and kept separate from personal cloth-
ing.
• Where there is a risk of eye contact, eye protec-
tion should be worn i.e. chemical goggles or face
shields. In addition, an eye wash facility should
be provided.
• Obtain first aid treatment immediately for open
cuts and wounds.
• Wash regularly with soap and water to ensure all
oil is removed (skin cleansers and nail brushes
will help). After cleaning, apply lotion, etc., con-
taining lanolin to replace natural skin oils is
advised.
• Do not use gasoline, kerosene, diesel fuel, gas
oil, thinners or solvents for cleaning skin.
• Apply barrier creams before each work period.
• If skin disorders develop, obtain medical advice
immediately.
LUBRICANTS
M1121000402796
.
Item
Specification
Oil pump type
Trochoid type
Drive method
Crankshaft
Item
Engine oil
Quantity dm
3
(qt)
Oil filter
Engine oils displaying ILSAC certification
symbol ("Starburst" symbol) or conforming
to the API classification SM.
0.3 (0.32)
Total quantity
2.4L ENGINE
4.6 (4.82)
3.0L ENGINE
4.3 (4.52)
SERVICE SPECIFICATIONS
TSB Revision
ENGINE LUBRICATION
12-3
ENGINE OIL
CAUTION
Never use nondetergent or straight mineral oil.
Use only engine oils displaying the ILSAC certification symbol
("Starburst" symbol) on the container.
If these oils are not available, an API classification SM can be
used.
SERVICE SPECIFICATIONS
M1121000300630
SEALANT
M1121000501422
AC609011
ILSAC certification symbol
("Starburst" symbol)
AC
A
P
I
SE
RVICE
S
M
SAE
0W-20
ACA01781
API service symbol
AD
ITEM
STANDARD VALUE
Engine oil pressure kPa (psi)
at idle
29 (4.2) or more
at 3,500 r/min
294
− 686 (43 − 100)
Item
Specified sealant
Remark
Engine oil pressure switch
ThreeBond 1141J, ThreeBond 1215, ThreeBond 1212D or
equivalent
Semi-drying
sealant
SPECIAL TOOLS
TSB Revision
ENGINE LUBRICATION
12-4
SPECIAL TOOLS
M1121000602400
ON-VEHICLE SERVICE
ENGINE OIL CHECK
M1121000901141
1. Pull out the engine oil dipstick, clean off the engine oil on the
engine oil dipstick, and then reinsert the engine oil dipstick.
2. Pull out the engine oil dipstick, and check the engine oil level
is within the marks on one side of the engine oil dipstick
(engine cover side.)
NOTE:
.
•
Checking the engine oil might be difficult shortly after
stopping the engine or engine oil replacement.
•
If difficult, take some time (approximately 30 seconds)
and try again.
•
Refer to the information label indicating the engine oil
check process on the rocker cover.
3. Check that the engine oil is not excessively dirty, that there
is no coolant or gasoline mixed in, and that it is sufficiently
thick and slippery.
Tool
Tool number
and name
Supersession
Application
MB991396
Oil filter wrench
General service tool
or MB991396-01
Removal and installation of engine oil
filter (when using oil filter MD360935)
MB991828
Oil filter wrench
General service tool Removal and installation of engine oil
filter (when using oil filter MD332687
or MD365876)
MB992676
Oil filter stud
setter
−
Installation of engine oil filter stud
<3.0L ENGINE>
MB992118
Oil pressure
switch wrench
−
Removal and installation of engine oil
pressure switch
B991396
MB991828
MB992676
MB992118
AC205268
Maximum
Minimum
Good
AE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст