Mitsubishi Outlander GS45X. Manual — part 221
PANIC ALARM
TSB Revision
CHASSIS ELECTRICAL
54A-881
SPECIAL TOOLS
M1547000600402
Tool
Tool number and
name
Supersession
Application
MB991958
a. MB991824
b. MB991827
c. MB991910
d. MB991911
e. MB991914
f. MB991825
g. MB991826
M.U.T.-III
sub-assembly
a. Vehicle
communication
interface (V.C.I.)
b. M.U.T.-III USB
cable
c. M.U.T.-III main
harness A
(Vehicles with
CAN
communication
system)
d. M.U.T.-III main
harness B
(Vehicles without
CAN
communication
system)
e. M.U.T.-III main
harness C (for
Chrysler models
only)
f. M.U.T.-III
measurement
adapter
g. M.U.T.-III trigger
harness
MB991824-KIT
NOTE: G: MB991826
M.U.T.-III Trigger
Harness is not
necessary when
pushing V.C.I. ENTER
key.
CAUTION
M.U.T.-III main harness A
(MB991910) should be used.
M.U.T.-III main harness B and C
should not be used for this
vehicle.
Reading diagnostic trouble code.
MB991910
MB991826
MB991958
MB991911
MB991914
MB991824
MB991827
MB991825
DO NOT USE
a
b
c
d
e
f
g
DO NOT USE
PANIC ALARM
TSB Revision
CHASSIS ELECTRICAL
54A-882
DIAGNOSIS
STANDARD FLOW OF DIAGNOSTIC TROUBLESHOOTING
M1547001200195
Refer to GROUP 00
− Contents of troubleshooting
.
DIAGNOSTIC FUNCTION
M1547001300095
HOW TO CONNECT THE SCAN TOOL (M.U.T.-III)
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
1. Ensure that the ignition switch is at the "LOCK" (OFF)
position.
2. Start up the personal computer.
3. Connect special tool MB991827 to special tool MB991824
and the personal computer.
4. Connect special tool MB991910 to special tool MB991824.
5. Connect special tool MB991910 to the data link connector.
6. Turn the power switch of special tool MB991824 to the "ON"
position.
NOTE: When special tool MB991824 is energized, special
tool MB991824 indicator light will be illuminated in a green
color.
7. Start the M.U.T.-III system on the personal computer.
NOTE: Disconnecting scan tool MB991958 is the reverse of the
connecting sequence, making sure that the ignition switch is at
the "LOCK" (OFF) position.
HOW TO READ AND ERASE DIAGNOSTIC
TROUBLE CODES
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
NOTE: If the battery voltage is low, diagnostic trouble codes will
not be set. Check the battery if scan tool MB991958 does not
display.
ZC501967
AC404789
AC702802
MB991824
MB991827
MB991910
Data link
connector
AB
PANIC ALARM
TSB Revision
CHASSIS ELECTRICAL
54A-883
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "System select" from the start-up screen.
4. Select "From 2006 MY" of "Model Year." When the "Vehicle
Information" is displayed, check the contents.
5. Select "ETACS" from "System List", and press the "OK"
button.
NOTE: When the "Loading Option Setup" list is displayed,
check the applicable item.
6. Select "Diagnostic Trouble Code." to read the DTC.
7. If a DTC is set, it is shown.
8. Choose "Erase DTCs" to erase the DTC.
TROUBLE SYMPTOM CHART
M1547001500282
Trouble symptom
Reference
page
Panic alarm does not work normally.
PANIC ALARM
TSB Revision
CHASSIS ELECTRICAL
54A-884
SYMPTOM PROCEDURES
Panic alarm does not work normally.
.
TECHNICAL DESCRIPTION (COMMENT)
If keyless operation system <KOS> or keyless entry
system <WCM> is normal, the ETACS-ECU may be
defective.
.
TROUBLESHOOTING HINTS
• Keyless operation system <KOS> or keyless
entry system <WCM> may be defective
• The ETACS-ECU may be defective
• Function is not set with the customization.
• The wiring harness or connectors may have
loose, corroded, or damaged terminals, or termi-
nals pushed back in the connector
DIAGNOSIS
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
STEP 1. Check if the theft-alarm is normally set and the
exterior protection can be executed.
Check that the theft-alarm works normally.
Q: Does the theft-alarm work normally?
YES : Go to step 2.
NO : Troubleshoot the theft-alarm (Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст