Mitsubishi Lancer Evolution 8. Manual — part 11
BODY - DOOR
4-5
Engine immobiliser sticker
Door
Security against theft has been improved by adding a security alarm function to the keyless entry system.
Keyless entry system
General information
The security alarm function controls locking and unlocking by a keyless entry transmitter, and the system raises the alarm if
the door is opened by a control other than the keyless entry transmitter. It is set to “Off” at the time of leaving the factory and it
can customised so as to be set to “On”. (Refer to Group 7 – SWS for details)
The system can be customised and this is described in the Handbook.
Security alarm sticker
(1)
There is a security alarm sticker inside the glove box.
(2)
Please explain to customers that the security alarm sticker can be attached to the window from outside the vehicle.
It must not be attached to the windscreen or front door window where it will obstruct visibility.
Recommended location for attaching the security alarm sticker
Note
There is a danger of it becoming detached if it is attached to an opening window.
EXTERNAL PARTS – FRONT BUMPER
5-1
Intercooler
aperture
Front bumper
(Front bumper face)
Material: Mica infused synthetic rubber polypropylene
Symbol: PP + E/P – TP (HMPP)
Heat resistance temperature: 80 to 100°C
New
Old
Front bumper
Side air outlet
SECTION 5
CONTENTS
Front Bumper . . . . . . . . . . ..5-1
Underbody Protection . . . . . . . 5-2
Rear Spoiler. . . . . . . . . . . .5-2
Indication marks . . . . . . . . . .5-3
Front Bumper
The front bumper has been redesigned to reflect the new Mitsubishi image, and has the following features.
• Cooling capability has been improved by increasing the dimensions of the intercooler aperture of the front bumper.
• Aerodynamic performance has been improved by discontinuing the front bumper side air outlet.
• Manoeuvrability has been improved by having a shape that reduces the bulge on the corner section of the front bumper.
Note:
• To comply with ISO labeling standards for material symbols, “New” and “Former ( )” are written side by side if the new label is
different from the old label.
ISO (INTERNATIONAL ORGANIZATION FOR STANDARDIZATION)
• The slash “/” in the material symbol indicates that the two types of material are copolymers, and the (+) indicates that it is a
blend material. The name of manufacturer of the paint used at the time of production is shown.
• The material of a synthetic resin part is recorded by the material symbol in an inconspicuous place on the part.
EXTERIOR PARTS – UNDERBODY PROTECTION
5-2
Front bumper
Underbody protection
AC210652AK
New
Old
Rear spoiler
Material: Carbon fibre reinforced plastic
Symbol: PP + E/P – TP (HMPP)
Heat resistance temperature: 80 to 100°C
Rear spoiler
AC211474AC
AC106954AB
Exterior Parts – Underbody protection
Aerodynamic and drive line cooling efficiencies have been improved by changing the shape of the underbody protection.
Rear Spoiler
The rear spoiler adopts a carbon construction of a new design that looks like the tail fin of an aeroplane. It has the following
features:
• It has been made about 2 kg. lighter than the rear spoiler of the Lancer Evolution-VII (ABS resin) by using carbon in the
material of the rear spoiler.
• Compared to the rear spoiler of the Lancer Evolution-VII (ABS resin), the vertical and horizontal rigidity of the central part of
the horizontal fin have improved about twofold by using carbon in the material of the rear spoiler.
• Making the rear spoiler fin slimmer has reduced wind drag.
• Downforce efficiency has been improved by locating the mounting of the rear spoiler further back.
The material of a synthetic resin part is recorded by the material symbol in an inconspicuous place on the part.
EXTERIOR PARTS – IDENTIFICATION MARKS
5-3
Boot lid
Identification marks
The EVOLUTION identification mark on the boot lid has changed
EVOLUTION identification mark
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст