Mitsubishi Lancer. Manual — part 29
REAR FLOOR <SEDAN>
WELDED PANEL REPLACEMENT
3-34
REAR FLOOR <SEDAN>
M4030010000168
NOTE: Refer to the Rear End Panel <SEDAN> section on
for the welding points with the rear end
panel.
AB300824
SYMBOL
OPERATION DESCRIPTION
Spot welding
MIG plug welding : indicates two panels to be welded
: indicates three panels to be welded
MIG spot welding
MIG arc welding (continuous)
Braze welding
Anti-corrosion agent application locations
(Use access holes to apply liberally to butt-welded joints.)
( )
AB
AB301005
REPAIR WELDS
D
B
AB
A
C
A
E
REAR FLOOR <SEDAN>
WELDED PANEL REPLACEMENT
3-35
NOTE ON REPAIR WORK
REMOVAL
When cutting the rear floor pan, cut it from 320
± 10
mm behind the back of the rear seat back reinforce-
ment.
AB100144
AB301008
B
C
D
E
AB
Right
side
only
Right
side
only
AB301009AB
320 ± 10 mm
Rear seat back
reinforcement
REAR FLOOR <WAGON>
WELDED PANEL REPLACEMENT
3-36
REAR FLOOR <WAGON>
M4030010000179
NOTE: Refer to the Rear End Crossmember <WAGON> section on
for the welding points with the
rear end crossmember.
AB300749
AB300825
SYMBOL
OPERATION DESCRIPTION
Spot welding
MIG plug welding : indicates two panels to be welded
: indicates three panels to be welded
MIG spot welding
MIG arc welding (continuous)
Braze welding
Anti-corrosion agent application locations
(Use access holes to apply liberally to butt-welded joints.)
( )
AB
AB301013AB
REPAIR WELDS
A
A
D
C
B
REAR FLOOR <WAGON>
WELDED PANEL REPLACEMENT
3-37
NOTE ON REPAIR WORK
REMOVAL
When cutting the rear floor pan, cut it from 400
± 10
mm behind the rear seat back assembling hole.
AB100144
AB301008AB
D
B
C
Right
side
only
Right
side
only
AB300907AB
400 ± 10 mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст