Mitsubishi Lancer. Manual — part 28
QUARTER, OUTER <WAGON>
WELDED PANEL REPLACEMENT
3-30
4. Assemble the quarter outer panel, cover the hole
and flange with bolt and aluminium tape, then fill
the hole with foam materials as shown in the
figure of the instructions.
Foam: 3M ATD ULTRAPRO Panel foam-Yel-
low
5. Wait 2 hours after filling the foam materials to
remove the bolt and aluminium tape. Then melt
the foam materials with a soldering gun so a clip,
etc. can thoroughly be inserted in the hole that
was clogged with foam materials, to bore open
the hole.
AB300905AB
AB301077AB
ROOF <SEDAN>
WELDED PANEL REPLACEMENT
3-31
ROOF <SEDAN>
M4030011000161
Adhesive: Urethane body sealer
Brand: 3M ATD Part No.8542 or equivalent
Spot welding
MIG plug welding : indicates two panels to be welded
: indicates three panels to be welded
MIG spot welding
MIG arc welding (continuous)
Braze welding
Anti-corrosion agent application locations
(Use access holes to apply liberally to butt-welded joints.)
( )
Symbol
Operation description
AB300996AB
AB301091
A
A
B
B
AB
Repair welds
: Adhesive
C
D
C
D
ROOF <WAGON>
WELDED PANEL REPLACEMENT
3-32
ROOF <WAGON>
M4030011000172
Adhesive: Urethane body sealer
Brand: 3M ATD Part No.8542 or equivalent
Spot welding
MIG plug welding : indicates two panels to be welded
: indicates three panels to be welded
MIG spot welding
MIG arc welding (continuous)
Braze welding
Anti-corrosion agent application locations
(Use access holes to apply liberally to butt-welded joints.)
( )
Symbol
Operation description
AB300997AB
AB500781
A
B
B
AB
Repair welds
: Adhesive
C
D
E
Vehicles with roof rail
Vehicles with roof rail
Vehicles without roof rail
ROOF <WAGON>
WELDED PANEL REPLACEMENT
3-33
NOTE ON REPAIR WORK
<VEHICLE WITH ROOF RAIL>
REMOVAL
The welding point is at the bottom of the roof rack
bracket rear. Thus, remove the roof rack bracket rear
and detach the welding point.
INSTALLATION
Remove the roof rack reinforcement rear. Weld the
roof panel and then assemble the roof rack reinforce-
ment rear.
AB301092
A
C
AB
B
D
E
AB300906
Roof rack
reinforcement rear
AB
Weld points
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст