Dodge Dakota (ND). Manual — part 1156
HINGE
REMOVAL
1. Remove the door. (Refer to 23 - BODY/DOOR -
CARGO/DOOR - REMOVAL)
Upper Hinge
NOTE: A suitable body sealant should be used
when removing or moving the hinges.
1. Remove the lower c-pillar trim (1). (Refer to 23 -
BODY/INTERIOR/PANEL-C
PILLAR
TRIM
-
REMOVAL)
23 - 36
DOOR - CARGO
ND
2. Using a grease pencil or equivalent, mark the loca-
tion of the hinges on the pillar to aid installation.
3. Remove the two upper hinge inner bolts (3).
4. Remove the two outer bolts (1) and remove the
hinge (2).
Lower Hinge
NOTE: A suitable body sealant should be used
when removing or moving the hinges.
1. Remove the four hinge bolts (5) and remove the
hinge (4).
ND
DOOR - CARGO
23 - 37
INSTALLATION
Upper Hinge
NOTE: A suitable body sealant should be used
when removing or moving the hinges.
1. Install the hinge (2) and align with the marks made
during removal.
2. Install the two outer bolts (1) and tighten to 28 N·m
(21 ft. lbs.).
3. Install the two inner bolts (3) and tighten to 28 N·m
(21 ft. lbs.).
4. Install the door and adjust the door position if
required. (Refer to 23 - BODY/DOOR - CARGO/
DOOR - ADJUSTMENTS)
23 - 38
DOOR - CARGO
ND
5. Install the lower c-pillar trim. (Refer to 23 - BODY/
INTERIOR/PANEL-C PILLAR TRIM - INSTALLA-
TION)
Lower Hinge
NOTE: A suitable body sealant should be used
when removing or moving the hinges.
1. Install the hinge (4) and align with the marks made
during removal.
2. Install the three hinge bolts (5) and tighten to 28
N·m (21 ft. lbs.).
3. Install the door and adjust the door position if
required. (Refer to 23 - BODY/DOOR - CARGO/
DOOR - ADJUSTMENTS)
ND
DOOR - CARGO
23 - 39
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст