Dodge Dakota (ND). Manual — part 1155
2. Remove the six nuts (2) holding the glass (4) onto
the door fence line (3).
3. Using an adhesive cutting wire (4) or equivalent
separate the glass adhesive (2) and remove the
glass.
1 - T-HANDLE
2 - WINDSHIELD ADHESIVE
3 - COUNTER SUPPORT
4 - CUTTING WIRE
23 - 32
DOOR - CARGO
ND
INSTALLATION
1. Clean the old glass sealer from the glass fence
line.
2. Install new butel sealer around the edge of the
glass if necessary.
3. Install the glass (1) and install the six nuts (2).
4. Tighten the nuts (2) to 4 N·m (35 in. lbs.).
5. Install the trim panel. (Refer to 23 - BODY/DOOR -
CARGO/PANEL-TRIM - INSTALLATION)
ND
DOOR - CARGO
23 - 33
HANDLE-SHUTFACE
REMOVAL
1. Remove the two screws (2) and separate the han-
dle (1) from the door.
2. Disconnect the upper and lower cables (1) from the
handle (2) and remove the handle.
23 - 34
DOOR - CARGO
ND
INSTALLATION
1. Connect the upper and lower cable ends (1) to the
handle arms (2).
2. Install the handle (1) and install the screws (2).
ND
DOOR - CARGO
23 - 35
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст