Dodge Dakota (ND). Manual — part 915
16. Install first gear outer friction ring (1) on 1-2 hub
(2).
17. Install first gear inner friction ring (1) on 1-2 hub
(2).
18. Install first gear bearing (1) on mainshaft (2).
21 - 52
MANUAL TRANSMISSION-GETRAG 238
ND
19. Install first gear (1) on mainshaft (2).
WARNING: Use welding gloves or tongs when
handling heated components. Failure to follow
these instructions will result in personal injury.
CAUTION: A bearing heater is used to heat reverse
bearing race (1). Use only a bearing heater/hot
plate and follow manufacturer’s instructions. Heat
components to 100 - 177 Celsius (212° Min - 350°
Max Fahrenheit). Never use an open flame to heat
components. Never leave components on heater
for an extended amount of time. If component is
discolored after heating the component has been
overheated and must not be used. Failure to fol-
low these instructions will result in component
damage.
20. Heat reverse bearing race (1) with bearing (2) to
121 Celsius (250° Fahrenheit).
21. With welding gloves or tongs install reverse bear-
ing race (1) on mainshaft (2).
ND
MANUAL TRANSMISSION-GETRAG 238
21 - 53
22. Install reverse gear bearing (1) on bearing race
(2).
23. Install reverse gear (1) on mainshaft (2).
24. Install reverse gear friction/blocker ring (1) on
reverse gear (2).
21 - 54
MANUAL TRANSMISSION-GETRAG 238
ND
25. Install reverse synchronizer detents (1) in reverse
hub (2).
26. Install reverse synchronizer sleeve (1) on reverse
hub (2).
27. Install reverse gear synchronizer hub (1) with
Installer D-389 (2).
ND
MANUAL TRANSMISSION-GETRAG 238
21 - 55
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст