Dodge Ram Truck 1500-2500-3500. Manual — part 1975
REAR DOOR OUTER BELT MOLDING
REMOVAL
1. Remove the screw (3) and separate the belt mold-
ing (1) from the door (2) flange from the back to
the front.
INSTALLATION
1. Position the belt molding (1) onto the door (2)
flange and seat fully.
2. Install the screw (3).
23 - 254
WEATHERSTRIP/SEALS
DR/DH
REAR DOOR INNER BELT MOLDING
REMOVAL
1. Remove the door trim panel (5) (Refer to 23 -
BODY/DOORS - REAR/TRIM PANEL - REMOVAL).
2. Separate the belt molding (2) from the rear door
mounting flange from the back to the front.
INSTALLATION
1. Position the belt molding (2) and seat onto the rear
door mounting flange fully.
DR/DH
WEATHERSTRIP/SEALS
23 - 255
2. Install the door trim panel (5) (Refer to 23 - BODY/
DOORS - REAR/TRIM PANEL - INSTALLATION).
23 - 256
WEATHERSTRIP/SEALS
DR/DH
BODY STRUCTURE
TABLE OF CONTENTS
page
page
GAP AND FLUSH
. . . . . . . . . . . . . . . . . . . . . . 257
OPENING DIMENSIONS
. . . . . . . . . . . . . . . . . . . . . . 261
SEALER LOCATIONS
. . . . . . . . . . . . . . . . . . . . . . 264
STRUCTURAL ADHESIVE LOCATIONS
. . . . . . . . . . . . . . . . . . . . . . 274
WELD LOCATIONS
. . . . . . . . . . . . . . . . . . . . . . 282
GAP AND FLUSH
SPECIFICATIONS
GAP & FLUSH DIMENSIONS INDEX
DESCRIPTION
FIGURE
STANDARD CAB
1
QUAD CAB
2
PICKUP BOX
3
DR/DH
BODY STRUCTURE
23 - 257
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст