Dodge Ram Truck 1500-2500-3500. Manual — part 1974
4. Install the door glass (Refer to 23 - BODY/DOOR -
FRONT/DOOR GLASS - INSTALLATION).
FRONT DOOR OUTER BELT MOLDING
REMOVAL
1. Remove the screw (4) and separate the belt mold-
ing (1) from the door (5) flange from the back to
the front.
23 - 250
WEATHERSTRIP/SEALS
DR/DH
INSTALLATION
1. Position the belt molding (1) onto the door (5)
flange and seat fully.
2. Install the screw (4).
FRONT DOOR INNER BELT MOLDING
REMOVAL
1. Remove the door trim panel (3) (Refer to 23 -
BODY/DOOR - FRONT/TRIM PANEL - REMOVAL)
DR/DH
WEATHERSTRIP/SEALS
23 - 251
2. Separate the belt molding (1) from the door (3)
mounting flange from the back to the front.
INSTALLATION
1. Position the belt molding (1) and seat onto the door
(3) mounting flange fully.
2. Install the door trim panel (3) (Refer to 23 - BODY/
DOOR - FRONT/TRIM PANEL - INSTALLATION).
23 - 252
WEATHERSTRIP/SEALS
DR/DH
REAR DOOR GLASS RUN WEATHERSTRIP
REMOVAL
1. Lower the glass.
2. Separate the rear door glass run weatherstrip (5)
out of the door frame (2) and remove through the
window opening.
INSTALLATION
NOTE: A mixture of soap and water may be used
to aid installation of the weatherstrip into the cor-
ners.
1. Position the rear door glass run weatherstrip (5)
into the door (2) through the window opening.
2. Position the weatherstrip (5) into the upper corners
and seat firmly.
3. From back to front, seat the weatherstrip (5)
between the corners and then down the sides
firmly.
DR/DH
WEATHERSTRIP/SEALS
23 - 253
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст