Dodge Caliber. Manual — part 1325
REAR DOOR LATCH STRIKER
REMOVAL
1. Open door.
2. Remove fasteners (2).
3. Remove striker (1).
INSTALLATION
1. Align striker (1) with holes in body.
2. Install fasteners.
3. Tighten fasteners to 26 N·m (19 ft. lbs.)
PM
DOORS - REAR
23 - 37
REAR DOOR OUTSIDE HANDLE
REMOVAL
1. Remove door plugs. (Refer to 23 - BODY/DOORS
- REAR/APPLIQUE - REMOVAL)
2. Remove bolster. (Refer to 23 - BODY/DOORS -
REAR/TRIM PANEL - REMOVAL)
3. Remove door module. (Refer to 23 - BODY/
DOORS - REAR/DOOR - REMOVAL)
4. Remove rod link (1).
5. Remove fasteners (3).
6. Remove handle (2) from door.
INSTALLATION
1. Install door handle (2).
2. Install three fasteners. Tighten to 8 N·m (6 ft. lbs.).
3. Install rod link (1).
4. Install door module. (Refer to 23 - BODY/DOORS -
REAR/DOOR - INSTALLATION)
5. Install bolster. (Refer to 23 - BODY/DOORS -
REAR/TRIM PANEL - INSTALLATION)
6. Install door plugs. (Refer to 23 - BODY/DOORS -
REAR/APPLIQUE - INSTALLATION)
23 - 38
DOORS - REAR
PM
REAR DOOR PLUGS
REMOVAL
1. Using special tool C-4755, pry up handle plug (3)
from door (1).
2. Using special tool C-4755, pry up speaker grille (4)
from door.
INSTALLATION
1. Align speaker grille (4) with speaker opening and
hand tap speaker grille (4) to door ensuring fit.
2. Align handle plug with handle plug opening and
hand tap ensuring fit.
PM
DOORS - REAR
23 - 39
REAR DOOR LATCH
REMOVAL
1. Remove window crank handle (4) and washer if
equipped.
2. Remove rear door trim bolster. (Refer to 23 -
BODY/DOORS - REAR/TRIM PANEL - REMOVAL)
3. Remove door plugs. (Refer to 23 - BODY/DOORS
- REAR/APPLIQUE - REMOVAL)
4. Remove rear door module.
5. If equipped, remove wire connector.
6. Remove latch rod (4) from latch (3).
23 - 40
DOORS - REAR
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст