Dodge Caliber. Manual — part 1324
DOOR MODULE
REMOVAL
1. Remove door plugs. (Refer to 23 - BODY/DOOR -
FRONT/DOOR - REMOVAL)
2. Remove manual window crank if equipped.
3. To remove bolster using trim stick C-4755 start at
the lower left corner and pry and slide special tool
until bolt unsnaps from clips.
4. Remove glass. (Refer to 23 - BODY/DOOR -
FRONT/DOOR GLASS - REMOVAL)
PM
DOOR - FRONT
23 - 33
5. Remove fasteners from locations.
INSTALLATION
1. Install door module (2) to door (1) aligning module
clips with door access holes.
2. Install fasteners to module ensuring proper seat.
3. Install glass into window regulator clips. (Refer to
23 - BODY/DOOR - FRONT/DOOR GLASS -
INSTALLATION)
23 - 34
DOOR - FRONT
PM
4. Install window crank (1) if equipped.
5. Install bolster. (Refer to 23 - BODY/DOOR -
FRONT/DOOR - INSTALLATION)
6. Install door plugs. (Refer to 23 - BODY/DOOR -
FRONT/DOOR - INSTALLATION)
PM
DOOR - FRONT
23 - 35
DOORS - REAR
TABLE OF CONTENTS
page
page
REAR DOOR LATCH STRIKER
REAR DOOR OUTSIDE HANDLE
REAR DOOR PLUGS
REAR DOOR LATCH
REAR DOOR LATCH ADJUSTMENT . . . . . . . . . . 42
REAR DOOR
REAR DOOR GLASS
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
REAR DOOR TRIM BOLSTER
REAR DOOR WINDOW REGULATOR
DOOR-MODULE
SPEAKER AND GRILLE
GLASS RUN CHANNEL
23 - 36
DOORS - REAR
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст