Dodge Caliber. Manual — part 41
5. Lift driveline module into place.
6. Install the two driveline module side mounting bolts
(1)and torque to 102 N·m (75 ft.lbs.).
PM
HALF SHAFT-RIGHT REAR
3 - 39
7. Install the one rear driveline module mounting bolt
(1) and torque to 102 N·m (75 ft. lbs.).
8. Install the right side stay bracket and bolts,(1)
torque to 61 N·m (45 ft. lbs.)
3 - 40
HALF SHAFT-RIGHT REAR
PM
9. Install the left side stay bracket bolts, (1) torque to
61 N·m (45 ft. lbs.).
10. Install the propeller shaft (Refer to 3 - DIFFEREN-
TIAL
&
DRIVELINE/PROPELLER
SHAFT
-
INSTALLATION).
11. Fill the rear axle with fluid.
12. Roll sway bar into place (2) (if equipped).
PM
HALF SHAFT-RIGHT REAR
3 - 41
13. Install left side sway bar nut (1) and torque to 61
N·m (45 ft. lbs) (if equipped).
14. Install right side sway bar nut (1) and torque to 61
N·m (45 ft. lbs.) (if equipped).
15. install the exhaust (Refer to 11 - EXHAUST SYS-
TEM/MUFFLER - INSTALLATION).
16. Install the wheels (Refer to 22 - TIRES/WHEELS -
DIAGNOSIS AND TESTING).
3 - 42
HALF SHAFT-RIGHT REAR
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст