Dodge Caliber. Manual — part 1355
11. Install the headrest sleeves (2).
12. Position the seat back panel (1) onto the seat
back (2) and seat fully.
13. Press the headrest sleeve release buttons and
install the headrest.
14. Install the seat back (Refer to 23 - BODY/SEATS/
SEAT BACK - INSTALLATION).
PM
SEATS
23 - 157
INSTALLATION
Driver Seat
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/SEATS - WARNING)
2. Install the seat back assembly (2) and install the
bolts (1).
3. Tighten the bolts to 40 N·m (30 ft. lbs.).
4. Position the side shields onto the seat adjuster
tabs (1) and seat the clip (2) fully.
5. Install the outer side shield screw (2).
23 - 158
SEATS
PM
6. Install the clip (2) onto the recliner handle, if
necessary.
7. Position the recliner handle (1) onto the spined
shaft (2) and seat fully.
8. Install the height adjuster handle (1) and install the
screws (2), if equipped.
PM
SEATS
23 - 159
9. Position the lift lever trim cap (2) and seat fully.
10. Position the inner side shields (2) and seat fully.
11. Install the seat cushion, (Refer to 23 - BODY/
SEATS/SEAT
CUSHION
-
FRONT
-
INSTALLATION).
Passenger Seat
1. Install the seat back assembly (1) and install the
bolts (2).
2. Tighten the bolts to 40 N·m (30 ft. lbs.).
23 - 160
SEATS
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст