Dodge Viper SRT-10 (ZB). Manual — part 359
TEST
ACTION
APPLICABILITY
5
If there are no possible causes remaining, view repair.
All
Repair
Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
329
POWER DOOR LOCKS/RKE
*DRIVER DOOR UNLATCH INOPERATIVE —
Continued
Symptom:
*PASSENGER DOOR SWITCH OR SWITCHES INOPERATIVE
POSSIBLE CAUSES
DTC PRESENT
SELECT SWITCH OR SWITCHES
PASSENGER DOOR SWITCH MUX WIRE OPEN
PASSENGER DOOR SWITCH RETURN WIRE OPEN
PASSENGER HANDLE SWITCH RETURN WIRE OPEN
PASSENGER DOOR LOCK SWITCH RETURN WIRE OPEN
PASSENGER HANDLE SWITCH MUX WIRE OPEN
PASSENGER DOOR LOCK SWITCH MUX WIRE OPEN
BODY CONTROL MODULE - SWITCH MUX OPEN
BODY CONTROL MODULE - SWITCH RETURN OPEN
PASSENGER HANDLE SWITCH
PASSENGER DOOR LOCK SWITCH
BODY CONTROL MODULE
TEST
ACTION
APPLICABILITY
1
With the DRBIII
t, read DTC’s.
Does the DRBIII
t display any Passenger Door Switch related trouble codes?
All
Yes
→ Refer to symptom list for problems related to POWER DOOR
LOCKS/RKE.
No
→ Go To 2
2
Select the appropriate Passengers Door Switch or Switches that are inoperative.
All
All Switches.
Interior or Exterior Handle Switch
Door Lock Switch
3
Disconnect one of the Passenger Door Switch connectors.
Using a 12-volt test light connected to 12-volts, check the Passenger Door Switch
Return circuit.
NOTE: The test light must illuminate brightly. Compare the brightness to
that of a direct connection to the battery.
Does the test light illuminate brightly?
All
Yes
→ Go To 4
No
→ Go To 7
330
POWER DOOR LOCKS/RKE
TEST
ACTION
APPLICABILITY
4
Disconnect one of the Passenger Door Switch connectors.
Measure the voltage between Passenger Door Switch Mux circuit and ground.
Is the voltage above 4.5 volts?
All
Yes
→ Go To 5
No
→ Go To 6
5
If there are no possible causes remaining, view repair.
All
Repair
Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
6
Disconnect one of the Passenger Door Switch connectors.
Disconnect the Body Control Module C3 connector.
Measure the resistance of the Passenger Door Switch Mux circuit between the BCM
C3 connector and the Switch connector.
Is the resistance below 5.0 ohms?
All
Yes
→ Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
No
→ Repair the Passenger Door Switch Mux circuit for an open.
Perform BODY VERIFICATION TEST - VER 1.
7
Disconnect one of the Passenger Door Switch connectors.
Disconnect the Body Control Module C4 connector.
Measure the resistance of the Passenger Door Switch Return circuit between the
BCM C4 connector and the Switch connector.
Is the resistance below 5.0 ohms?
All
Yes
→ Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
No
→ Repair the Passenger Door Switch Return circuit for an open.
Perform BODY VERIFICATION TEST - VER 1.
8
Disconnect the inoperative Passenger Handle Switch connector.
Using a 12-volt test light connected to 12-volts, check the Passenger Door Switch
Return circuit.
Does the test light illuminate brightly?
All
Yes
→ Go To 9
No
→ Repair the Passenger Door Switch Return circuit for an open.
Perform BODY VERIFICATION TEST - VER 1.
9
Disconnect the inoperative Passenger Handle Switch connectors.
Measure the voltage of the Driver Door Switch Mux circuit in the Passenger Handle
Switch connector.
Is the voltage above 4.5 volts?
All
Yes
→ Go To 10
No
→ Repair the Passenger Door Switch Mux circuit for an open.
Perform BODY VERIFICATION TEST - VER 1.
10
If there are no possible causes remaining, view repair.
All
Repair
Replace the Passenger Handle Switch.
Perform BODY VERIFICATION TEST - VER 1.
331
POWER DOOR LOCKS/RKE
*PASSENGER DOOR SWITCH OR SWITCHES INOPERATIVE —
Continued
TEST
ACTION
APPLICABILITY
11
Disconnect the Power Door Lock Switch connector.
Using a 12-volt test light connected to 12-volts, check the Passenger Door Switch
Return circuit.
Does the test light illuminate brightly?
All
Yes
→ Go To 12
No
→ Repair the Passenger Door Switch Return circuit for an open.
Perform BODY VERIFICATION TEST - VER 1.
12
Disconnect the Passenger Door Lock Switch connectors.
Measure the voltage of the Passenger Door Switch Mux circuit.
Is the voltage above 4.5 volts?
All
Yes
→ Go To 13
No
→ Repair the Passenger Door Switch Mux circuit for an open.
Perform BODY VERIFICATION TEST - VER 1.
13
If there are no possible causes remaining, view repair.
All
Repair
Replace the Passenger Door Lock Switch.
Perform BODY VERIFICATION TEST - VER 1.
332
POWER DOOR LOCKS/RKE
*PASSENGER DOOR SWITCH OR SWITCHES INOPERATIVE —
Continued
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст