Skoda Scala (2021 year). Manual in english — page 5
Infotainment Amundsen › Infotainment overview
91
▶ Restore factory settings
Infotainment Amundsen
Sound settings
Infotainment overview
The Infotainment sound is set in the menu
The following menu items can be set:
▶ Setting the equalizer
▶ Adjusting the volume ratio
▶ Volume adjustment of individual Infotainment
functions
The volume can be adjusted on e.g. one of the fol-
lowing menu items:
▶ Volume adjustment of voice commands
▶ Setting the maximum volume when Infotainment
is turned on
▶ Speed-dependent volume setting
A
Touchscreen
▶ Setting the Infotainment to mute with the park-
ing aid switched on
All menus
Depending on the equipment, the following ad-
Favourite menus
vanced sound settings can be set
Increase volume
▶ Setting space optimisation
Reduce volume
▶ Setting the audio pÙofiles according to genre
Depending on the status:
▶ Adjusting the subwoofer volume
▶ Infotainment switched off
CoÄfiguratioÄ wizard
▶ Tap: Turn on Infotainment
The oÄfi£uÙatioÄ wizard helps to set certain Info-
▶ Infotainment switched on
tainment functions.
▶ Tap: Switch sound off/oÄ
The oÄfi£uÙatioÄ assistant is automatically displayed
▶ Hold: Switch off Infotainment
if the ignition is switched on and if there are at least
two menu items that have not been set up after
Radio menu
switching on the Infotainment.
Media menu
› To switch off the automatic display, when the
Phone menu
oÄfi£uÙatioÄ assistant is displayed tap Don't show
again .
Navigation menu
› For manual display tap
Configuration wizard .
Information about vehicle settings
Set up menu HOME
›
To display another page of the HOME menu, press
System
the screen with two fiÄ£eÙs and drag it to the left
or right.
Limitation
To add the preferred menu, proceed as follows:
For safety reasons, operation of some Infotainment
› Tap on an empty functional surface.
functions while driving is not possible or is restricted.
Or:
The Infotainment system indicates this by means of
› Press and hold an occupied functional surface and
a message in the screen.
then tap on an empty functional area.
› Select a menu with the desired dimension of the
functional surface.
Basic settings
› Tap on to exit edit mode.
Setting basic functions
To remove the preferred menu, proceed as follows:
The following Infotainment functions are set in the
menu:
› Press an occupied functional surface.
› Tap on .
▶ Time and date
▶ Language
› Tap on to exit edit mode.
▶ Units
92
Infotainment Amundsen › Screen
Set up menu MENU
In principle, operation by touch is identical to the op-
The position of the functional surfaces in the MENU
eration of a mobile phone.
menu can be customized as follows:
The following operating modes are speifi to the In-
› Press and hold the desired functional surface until
fotainment system.
it is free.
Dragging up or down with two fiÄgers
› Move the functional surface to a diffeÙeÄt position.
▶ Quickly review the list
of phone contacts
Troubleshooting
▶ Switch 2D/3D map dis-
play
Infotainment not responding
If the infotainment does not respond, restart it as
follows:
› Hold for longer than 10 s.
Dragging left or right with two fiÄgers
› Wait for the restart to complete.
▶ Display next page of
the HOME menu
System update
We recommend having the system update carried
out by a specialist company.
The system update ensures optimal function of the
Infotainment system, e.g. compatibility with new
Pulling apart with two fiÄgers
phones.
▶ Enlarge image
Determine system version
▶ Zoom into the map
› Tap
System information.
Screen
Overview
Pulling together with two fiÄgers
▶ Minimize image
▶ Zoom out of the map
Turn two fiÄgers
▶ Rotate image
A
Status bar
▶ Rotate the map
B
Bar with the functional surfaces of the displayed
menu
C
Display of the control centre
D
Other pages of the menu
Contactless gesture control
The Infotainment menus marked with the symbol
can be controlled by hand gestures.
Operation
NOTICE
Danger of screen damage!
▶ The Infotainment screen is operated by touching it
lightly with your fiÄger.
Infotainment Amundsen › Infotainment keyboard
93
› Gesture control is ach-
▶ Move cursor to the right
ieved by slowly moving
B
Entries found
the hand back and
▶ Show list
forth approximately 8
cm above the lower
C
Keypad functional surfaces
edge of the screen.
▶ Change to lowercase
Depending on the set-
▶ Switch to fiÙst having an upper-case letter,
ting, a recognized ges-
followed by lower-case letters
ture can be oÄfiÙmed acoustically and animated.
▶ Switch to uppercase
Displaying operation help
▶
/
Switch to the language keypad
› Tap on
▶
Switch to the numeric and character key-
pad
▶
/ Switch to other character variants
Settings
▶ Show additional keyboard languages
The following basic screen functions are set in the
▶ Insert spaces
menu
Screen:
▶ The next line
▶ Brightness level of the screen
▶ Hold: Show more character variants
▶ Switch off the screen
▶ Show password
▶ Display the time
▶
oÄfiÙm the entered characters
▶ oÄfiÙmatioÄ sounds and animations
Numeric keypad
Infotainment keyboard
Keypad overview
The arrangement of the keyboard characters de-
pends on the set infotainment language.
Depending on the context, the following types are
used in infotainment:
▶ Alphanumeric
▶ Numeric
Keypad example
▶ Keyboard for input
▶ Keyboard for search
A
Input line
▶ Delete characters before the cursor
▶ Tap: delete the last character
▶ Hold: delete all characters
B
Keypad functional surfaces
▶
oÄfiÙm the entered characters
If it is possible depending on the context, alpha-
numeric characters can be entered by holding a
function area with the number.
Keypad example
A
Input line
Operation
▶ Delete characters before the cursor
The Infotainment keypad is used to enter characters,
▶ Tap: delete the last character
letters and numbers.
▶ Hold: delete all characters one after the oth-
The keypad will be automatically displayed when In-
er
fotainment prompts for characters.
▶ Display functional surfaces for moving the
Find
cursor in the input line
When entering characters, corresponding entries are
▶ Move cursor to the left
searched for.
94
Infotainment Amundsen › Voice control
The entry to be searched for can be entered includ-
✓ The vehicle has Infotainment and functions that
ing diacritics.
can be controlled by the advanced voice control.
The keyboard will only provide characters that
✓ The ŠKODA Connect services are active.
match the stored entries.
✓ The vehicle is within range of a contractual mo-
bile network, through which the connection to
› To display searched entries tap
ŠKODA Connect Services is ensured.
Show additional keypad languages
✓ The level of protection of personal data is set to
To use the additional keypad languages, the desired
Share my position .
languages must be set fiÙst.
Requirement for recognition of the activation
› Tap or repeatedly tap the Ĕa£ symbol until the
command
desired language keypad is displayed.
✓ Activated menu item
Voice control Active
Further character variants
› Press and hold the sign with the symbol
Operation
› Select the desired symbol.
Switch on voice control
› Press the
button on the multifunction steering
Setting up additional keyboard languages
wheel.
› Tap
Additional keypad languages.
Or:
› Say the activation command “OK Laura”.
Voice control
After switching on, the icon is displayed in the sta-
tus bar.
Functionality
Enter voice command
Voice control principle
› Speak a voice command with voice control switch-
Voice control works according to the principle of
ed on.
dialogue between the user and the Infotainment sys-
During recognition of the voice command, the icon
tem.
is displayed.
The user says a voice command. The Infotainment
The Infotainment system then executes the voice
system responds or executes the voice command.
command or plays the message. During the message,
Advanced voice control
the icon is displayed.
The vehicle's advanced voice control enables the ve-
After the execution of the voice command, voice
hicle functions to be searched and operated online.
control is switched off.
Advanced voice control understands ĔueÄt whole
Correcting a voice command
sentences. You do not need to use set commands or
› During voice command input, press the
button
phrases.
on the multifunction steering wheel and say a new
The advanced voice control can, for example, search
voice command.
for special destinations or dictate SMS messages if
Stopping voice control
the connected telephone makes this possible.
Stopping leaves more time for voice command input,
This function allows you to combine the search in
e.g. for searching for a phone contact.
the online and offliÄe data of the Infotainment. The
› Move your fiÄ£eÙ up or down over the Infotain-
transition between online and offliÄe search is seam-
ment screen.
less and imperceptible to the user.
Or:
› Say the voice command “pause”.
Operating conditions
Resuming stopped voice control
✓ Ignition on
› Press the
button on the multifunction steering
✓ Infotainment switched on
wheel.
Operating conditions for advanced voice control
Or:
To use the advanced voice control, the following
› Tap on in the Infotainment screen.
conditions must also be met:
Stopping the played back message
✓ The vehicle supports the function.
› Press the
button on the multifunction steering
wheel.
Infotainment Amundsen › Control Centre
95
Ending voice control
Control Centre
› Press the
button on the multifunction steering
wheel twice.
Overview
Or:
Display of the control centre
› Say the voice command “cancel” during voice com-
› Press the bar at the
mand input.
top of the screen and
drag down.
Restriction
For some Infotainment languages, there is no voice
control available. The Infotainment system will indi-
cate this.
Closing the control centre
› Tap on
The messages are generated by Infotainment. Flaw-
less clarity (e.g. road or city name) cannot always be
Or:
guaranteed.
› Wait 5 seconds.
You cannot use voice control while a phone call is in
Control Centre
progress.
The Infotainment control centre can be used for
quick access to the following functions:
Settings
The following voice control functions are set in the
menu
Voice control:
▶ oÄfiÙmatioÄ tones
▶ Enable/disable use of the activation word.
Self help
Starting acoustic help
› If the Infotainment system is expecting a voice
A
Display and administration of functional surfaces
command, say “Help”.
of preferred features
The “Help” voice command can be issued repeatedly
B
Display list of informational messages
for further tips on voice control.
C
Preferred functions
Displaying the help
D
Display user account management
› Tap on
E
Setting the personal data protection level
Or:
F
Setting the instrument and key illumination
› If Infotainment is expecting a voice command, say
“Overview”.
Set functional areas of preferred features
Switch example voice commands display on / off
The system offeÙs the option of displaying example
› To display editing mode hold any function surface
voice commands after switching on the voice con-
of the preferred feature.
trol in the Infotainment screen.
› To add the preferred feature, move the desired
› To turn
voice control oÄ/off, tap Show in Info-
feature from the top of the screen to the function-
tainment system.
al surface at the bottom of the screen.
› To close edit mode, tap on .
Radio
Overview
Display menu
› Tap
96
Infotainment Amundsen › Radio
Or:
A
Select source
› Tap
B
Station name
Analogue and digital radio player
C
Information about the broadcast content
› A Tap and select the desired frequency range.
D
Station logos
› Tap and search for or select the desired station.
List of web radio and podcasts
› Tap on
Show favourites
Information about the programme as well as the
broadcast content of the web radio
Settings
Podcast player
›
Tap A and select an online radio station.
› Tap and search for or select the desired pocast.
› Tap
A
Select source
B
Station name
C
Information about the broadcast content
D
Station logos
List of available stations
Show favourites
Information about the station
Search stations manually (valid for AM and FM)
A
Select source
Settings
B
Podcast name
C
Information about the broadcast content
List of available analogue and digital radio stations
› Tap on
D
Podcast logo with the symbol
Played station
Tap: Start playback
Station stored on the presets
Tap: Pause
A tÙaffi radio station is set
Tap: Go back 15 secs
The DAB transmitter emits images which are
displayed in the information to the station
Tap: Go forward 15 secs
Manual update of the station list
View episodes of the podcast being played
In the station list, information about the programme
List of web radio stations and podcasts
type and the channel ideÄtifiatioÄ of the regional
channel can be displayed.
Show favourites
Show information about the podcast
Web radio player
› A tap and select a web radio station.
Settings
› Tap and search or select web radio.
List of web radio stations and podcasts
› Tap on
› Tap on
Infotainment Amundsen › Radio
97
Search for web radio stations and podcasts
SCAN function
The function plays receivable stations of the selec-
Recently played web radio stations and podcasts
ted frequency range in succession for a few seconds
100 most popular web radio stations depending
each.
on the Infotainment language that has been set
› To start automatic play
, tap Scan.
Go to podcasts and select
› To stop automatic play, tap
Search for and select web radio stations and pod-
Find stations manually
casts based on the selected country
Manual search is available for AM and FM stations.
Search for and select web radio stations and pod-
› To display the functional surface for the FM sta-
casts based on the selected language
tion, turn on menu item
Advanced settings
Station dis-
Search for and select web radio stations and pod-
play: FM switch on
casts based on the selected genre
› In the Radio main menu, tap
See list of related podcasts based on content lis-
› To search in sequence, tap or next to the dis-
tened to
played frequency range scale.
See list of related podcasts based on content lis-
Or:
tened to
› Hold down the scroll mark on the frequency range
The podcasts are shown in the displayed lists
scale and move it to the desired value.
with the icon .
List of favourite stations and podcasts
Limitation
› In the menu Radio, tap on
▶ Infotainment supports digital radio reception in
DAB and DAB+ formats.
▶ Car parks, tunnels, tall buildings or mountains can
restrict radio reception.
▶ In the rear side windows, there are antennas for re-
ceiving the radio signal.
Covering the panes with foils or metal-coated la-
bels may affet the reception of the radio signal.
▶ The ŠKODA AUTO company assumes no responsi-
bility for the availability, correct functioning and
A
Select source
broadcast information of the RDS service.
B
Radio text
C
Station buttons for favourite stations and pod-
Settings
casts
Save the station currently being listened to as a fa-
vourite from the Radio main menu
Operation
› Hold the desired station key for preferred stations
until the station is stored.
Select station
Save station to favourites from the list of available
stations
Applies to AM, FM and DAB frequency ranges.
› Hold the line with the name of the desired station.
› Tap the desired preset button.
Save channels from the list of web radio stations
and podcasts
Valid for web radio stations and podcasts
› Select a web radio station as the playback source.
› Tap on
› Tap or at the top of the screen.
› Go to the desired web radio station or podcast and
select it.
98
Infotainment Amundsen › Radio
› Hold the line with the name of the desired station
When the function is switched on, a station logo
or podcast.
from the Infotainment memory is assigned when the
› Tap the desired preset button.
station is stored on a preset.
With podcasts, it is not possible to save the indi-
› In the menu Radio
Advanced settings Tap Automatic selec-
vidual episodes.
tion of station logos .
Deleting favourites
Turn oÄ/off radio text reception
› In the menu Radio
Delete memory entries .
Applies to the FM and DAB frequency ranges.
› To delete a station button for preferred stations,
When the function is switched on and the station
tap the desired station button and oÄfiÙm the de-
buttons are displayed, you can see more information
letion.
about the content broadcast from the station to
which you are listening.
› To delete all station buttons for preferred stations
Clear all and oÄfiÙm the deletion.
› In the menu Radio
Radio text .
Functional surfaces for analogue and digital ra-
Regional FM station logo
dios
Applies to the FM frequency range.
Applies to AM, FM and DAB frequency ranges.
Infotainment provides the option of using ouÄtÙû-
The variant for changing stations using the function
speifi FM station logos.
surface in the Radio menu is set as follows:
› In the menu Radio
Advanced settings Region for station
› In the menu Radio
Arrow buttons: .
logo: .
› Select the variant for switching between the sta-
› Choose country.
tions stored on the station buttons or the stations
Switching additional announcements of the DAB
stored in the list of available stations.
transmitter on / off
Functional areas for web radio stations and
Applies to the DAB frequency range.
podcasts
When the function is switched on, other announce-
Applies to web radio stations and podcasts.
ments are received as tÙaffi announcements. These
The variant for changing stations using the function
include e.g. weather news, sports reports, fiÄaÄial
surface in the Radio menu is set as follows:
news etc.
› In the menu Radio
Advanced settings Tap Additional DAB
› In the menu Radio
Arrow buttons: .
announcements .
› Select the variant for switching between the sta-
tions stored on the station keys or the last web
Switch RDS oÄ/off
stations and podcasts listened to.
Applies to the FM frequency range.
Switch traffic reception (TP) for stations oÄ/off
The menu item is only available for some countries.
Applies to FM and DAB frequency range.
› In the menu Radio
Advanced settings Radio Radio Data
› In the menu Radio
Traffic program (TP) .
System (RDS) .
Assign station logo from the Infotainment memory
If the RDS function is disabled, the following menu
Applies to the FM and DAB frequency ranges.
items in FM station settings are not available:
Infotainment offeÙs the option of assigning logos,
▶ TÙaffi program (TP)
which are stored in the Infotainment memory, to the
▶ Radio text
stations.
▶ RDS Regional
› In the menu Radio
Station logos .
▶ Automatic frequency change (AF)
› Select the desired station and logo.
▶ Regional station logo.
Switching off the station logo display
Switch automatic switching to a similar DAB trans-
Applies to the FM and DAB frequency ranges.
mitter on / off
Applies to the DAB frequency range.
› In the menu Radio
Station logos .
When the function is switched on and there is signal
› To select the desired station. No station logo .
loss from the DAB station being listened to, Infotain-
Activating / deactivating automatic station logo
ment automatically sets another DAB station with
assignment
similar content.
Applies to the FM and DAB frequency ranges.
› In the menu Radio
Advanced settings Tap Switch to a simi-
lar station if weak reception .
Infotainment Amundsen › Media
99
Displaying FM / DAB stations or FM stations in the
Music player
list of available stations
Applies to the FM and DAB frequency ranges.
Depending on the following setting, the stations of
the selected frequency range are displayed in the list
of available stations.
› In the menu Radio
Advanced settings Station display: .
› Select one of the following menu items:
▶ FM/DAB - the list shows available FM and DAB sta-
tions.
▶ FM - the list shows available FM stations.
A
Choose source
Sound quality of web radio stations and podcasts
Manage files / multimedia database
Applies to web radio stations and podcasts.
Show favourites
› To adjust the sound quality, in the Radio menu tap
on
Audio quality: .
Details about the track being played
› Choose low or high quality.
Settings
The quality you set affets the amount of data used
Video player
in the data connection.
Quality also depends on the speed and availability of
the data connection.
If playback failure occur, reduce the sound quali-
ty.
Media
What you should be mindful of
▶ Do not save any important data or that which has
A
Select source
not been backed up on the connected audio sour-
Manage files / multimedia database
ces. ŠKODA assumes no responsibility for lost or
damaged files or connected audio sources.
Show favourites
▶ When changing or connecting an audio source, this
Show video
may cause sudden changes in volume. Reduce the
Shrink image display
volume before changing or connecting an audio
source.
Enlarge the image display
▶ When connecting an audio source, the source in-
Settings
formation messages can be displayed. These mes-
sages must be observed and, if necessary, con-
fiÙmed.
Player controls
▶ The national copyright laws that apply in your
country must be observed.
Operation - Basics
Overview
Display menu
› Tap
Or:
› Tap
A
Album image / symbol of the connected source
▶ Tap: list available albums
100 Infotainment Amundsen › Media
Tap: Start playback
Settings
Tap: Pause
Manage favourites
Within 3 seconds of starting playback, tap: play
the previous song
After 3 seconds from the start of playback, tap:
to play the current title from the beginning
Hold: fast rewind within the track
Tap: play the next track
Hold: fast forward within the track
Movement within the title is also possible by drag-
ging the fiģe٠over the timeline.
› To save, hold the desired functional area for fa-
Advanced operation
vourites A .
Turn on / off repeat playback of the current
› Choose one of the available list entries B .
track
Turn on / off repeat playback of the current al-
› To Clear, in the menu media
tap on Manage favour-
bum / folder
ites .
Turn on / off random playback of the current al-
› To delete a favourite, tap on the list entry and con-
bum / folder
fiÙm the deletion.
Save the played track in the “My playlist” playlist
Or:
“My playlist” management
› To delete all favourites tap on Clear all and oÄfiÙm
▶ To display the playlist, tap
the deletion.
▶ To manage the playlist tap in the displayed play-
Traffic
list.
› To turn oÄ/off tÙaffi monitoring during playback
The following activities can be carried out in playlist
of media files, go to the Media in the main menu
management:
and tap on Traffic program (TP) .
▶ Control playback.
▶ Change the order of a title in the list by holding and
moving to the desired position.
▶ Delete title.
Restriction
The availability of some media operation functions is
dependent on the connected source and the soft-
ware being used, e.g. Bluetooth®.
Supported sources and files
Infotainment Amundsen › Media 101
Supported sources
Source
Interface
Type
SpeifiatioÄ
File system
USB stick
HDD
(without special
software)
MSC
USB devices that
use the USB mass
VFAT
storage support
FAT16
protocol
FAT32
USB 1.x; 2.x 3.x
Devices running
exFAT
USB
or higher with USB
the Android or
NTFS
2.x support
Windows Phone
MTP
operating system
that support the
Media Transfer
Protocol
Devices with the
iOS operating sys-
Apple
HFS+
tem and the iAP2
protocol
Bluetooth® proto-
cols
Bluetooth® player
Bluetooth®
-
-
A2DP and AVRCP
(1.0
- 1.6)
Compatibility of mobile devices
It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile
device being tested. This check is carried out by using the following reference or by reading the QR code:
All information given is incidental and serves as information.
The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-
date of the Infotainment and the mobile devices.
Supported audio files
Compression for-
Codec type
File exten-
Max. bit rate
Max. sam-
Multi channels
mat
sion
[kbps]
pling rate
[kHz]
MPEG 1 Layer 2
32 - 384
32, 44, 48
Mono, stereo,
mp2
MPEG 2 Layer 2
8 - 160
16, 22, 24
Joint stereo
MPEG
MPEG 1 Layer 3
32 - 320
32, 44, 48
Mono, dual mono,
MPEG 2 Layer 3
mp3
16, 22, 24
Stereo, Joint
8 - 160
MPEG 2.5 Layer 3
8, 11, 12
Stereo
102 Infotainment Amundsen › Media
Compression for-
Codec type
File exten-
Max. bit rate
Max. sam-
Multi channels
mat
sion
[kbps]
pling rate
[kHz]
Windows Media
8, 16, 22, 32,
6 - 192
Audio 7
44, 48, 96
Windows Media
8 - 384
Audio 8
8, 11, 16, 22,
Windows Media
Mono, stereo,
WMA
wma
8 - 768
32, 44, 48,
Audio 9 and 9.1
Joint stereo
96
Windows Media
8 - 320
Audio 9.2
Windows Media
32, 44, 48,
32 - 768
Audio 10
96
22, 24, 32,
AAC LC
44, 48
ADTS
aac
16 - 2048
Stereo
AAC HE
16, 22, 24,
AAC HEv2
32, 44, 48
22, 24, 32,
M4A LC
16 - 400
44, 48
MP4
m4a
Stereo
M4A HE
16, 22, 24,
M4A HEv2
16 - 64
32, 44, 48
8, 11, 12, 16,
Mono,
OGG
OGG-Vorbis
ogg
8 - 576
22, 24, 32,
Stereo
44, 48, 96
8, 11, 12, 16,
22, 24, 32,
Mono, stereo,
FLAC
FLAC
Ĕa
-
44, 48, 64,
Joint stereo
88, 96, 192
8, 11, 12, 16,
Mono,
RIFF
WAV
wav
64 - 3072
22, 24, 32,
Stereo
44, 48, 96
Monkey's
Monkey's
ape
8 - 192
8, 11, 12, 16,
Mono, stereo,
SBC
Bluetooth A2DP
-
8 - 345
22, 24, 32,
Joint stereo
44, 48
Mono, stereo,
OPUS
OPUS
opus
6 - 2000
8 - 48
Multichannel
Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.
Supported video files
Codec type
File extension
Max. recordings per second bit rate
[Mbit/s]
mpg
mpeg
MPEG 1
1.5
m1v
mPV
mpg
mpeg
MPEG 2
15
ps
m2v
MPEG 4 (H.264)
m4p
MPJEG
mp4
m4v
50
MPEG 4 (ISO)
mp4v
mov
Xvid
Xvid
20
Infotainment Amundsen › Images 103
Codec type
File extension
Max. recordings per second bit rate
[Mbit/s]
wmv
WMV9
50
asf
Supported playlists
Codec type
File extension
M3U
m3u
M3U8
m3u8
PLS
pls
WPL
wpl
ASX
asx
Images
▶ Stop slideshow
B
View image
Overview
▶ Turn left
Display menu
▶ Turn right
› Tap
▶ Show in output size
Image viewer
Gesture control
▶ Display of the next im-
age
▶ Display the previous
image
A
Select source
Manage files
Settings
▶ Increase the image size
Operation
Operation using functional areas
▶ Reduce the image size
A
View images
▶ Show the next image
▶ Show the previous image
▶ Start slideshow
104 Infotainment Amundsen › Mobile device management
▶
Rotate by 90 °
› Use only media carriers, Bluetooth® devices, and
mobile devices that contain no harmful data or
malware.
› Regularly update the software provided by ŠKODA
AUTO.
We recommend having the system software and
components updated by a specialist company.
WARNING
Settings
Risk of an accident!
Malware in the vehicle can iÄĔueÄe and deactivate
The following Infotainment functions are set in the
certain vehicle functions, or take over the controls of
menu:
these where applicable.
▶ Display image size
▶ If the vehicle reacts in an unusual way, immediately
▶ Display image duration during the slideshow
reduce speed or stop the vehicle.
▶ Slideshow repeat
▶ Seek the help of a specialist garage.
WARNING
Malware in the vehicle may gain unauthorised access
Supported sources and files
to the information and data of the vehicle, and on oc-
Supported sources
casion, to connected mobile devices.
Source
Interface
Speifia-
File system
tioÄ
Overview
USB 1.x; 2.x
USB stick
VFAT
3.x
HDD
FAT16
Using mobile device management, devices can be
USB
or higher
(without
FAT32
connected, disconnected, and interchanged.
with USB
special
exFAT
Display mobile device management
2.x support
software)
NTFS
› Tap on
Manage mobile devices.
Supported files
Codec type
File extension
Max. resolution
[Mpx]
BMP
bmp
4
JPG; JPEG
jpg; jpeg
4 (Progressive
Mode)
64
GIF
gif
4
PNG
png
4
The maximum supported image size is 20 MB.
The device enables a connection via the Blue-
tooth®“hands-free pÙofile”
The device is connected via the Blue-
Mobile device management
tooth®“hands-free pÙofile”
Cybernetic security
The device enables a connection via the Blue-
tooth® audio pÙofile
Your vehicle contains components that are used to
The device is connected via the Bluetooth® audio
exchange information and data between the vehicle
pÙofile
and the connected mobile devices or the Internet.
Remove the device from the list previously con-
nected devices
These components have security mechanisms that
The device enables a SmartLinkconnection to be
minimise the risk of unauthorised access to the vehi-
cle systems.
made via Android Auto
The device enables a SmartLinkconnection to be
Regular software updates help reduce the risk of un-
made via Apple CarPlay
authorised access to vehicle systems and vehicle
The device enables a SmartLinkconnection to be
functions. The following guidelines must therefore
made via MirrorLink
be observed:
A
Connected / Previously connected devices
B
Available devices
Infotainment Amundsen › Telephone
105
Limitations of mobile devices and applications
Connection set-up
Availability of features
Connect a mobile device to Infotainment
The availability of certain features depends on the
› Find available Bluetooth® devices in the mobile de-
type of mobile device, as well as that of the applica-
vice.
tions installed.
› Select the Infotainment Bluetooth® unit.
Compatibility of mobile devices
The unit name can be determined by tapping
It is possible to check the ŠKODAweb pages to see if
Manage mobile devices
device name:.
Infotainment is compatible with the selected mobile
› oÄfiÙm the PIN; enter it if necessary and then
device being tested. This check is carried out by us-
oÄfiÙm.
ing the following reference or by reading the QR
code:
Connect Infotainment to a non-paired mobile de-
vice
›
Manage mobile devices .
› Select the desired device from the list of available
devices.
› Select the desired Bluetooth® pÙofile.
› oÄfiÙm the PIN; enter it if necessary and then
All information given is incidental and serves as in-
oÄfiÙm.
formation.
› If two devices are connected to the Infotainment,
The ŠKODA AUTO company cannot guarantee full
select the device to be replaced.
functionality and compatibility, e.g. due to a software
Connect Infotainment to a previously connected
update of the Infotainment and the mobile devices.
mobile device
Bluetooth® compatibility of mobile devices
›
Manage mobile devices .
Due to the large number of mobile devices, it is not
Or:
possible to guarantee total Bluetooth® compatibility
with Infotainment. Bluetooth® compatibility depends
›
Select mobile phone .
on the Bluetooth® version as well as the implementa-
› Select the desired device from the list of previous-
tion of Bluetooth® protocols by the manufacturer of
ly connected devices.
the mobile device.
› Select the desired Bluetooth® pÙofile.
Applications in mobile devices
› If two devices are connected to the Infotainment,
select the device to be replaced.
Mobile devices can be used to install applications
that allow you to view additional information on the
SmartLink connection
Infotainment screen, or to operate the Infotainment
Infotainment provides the ability to connect Smar-
system.
tLink to compatible mobile devices using the follow-
Due to the variety of applications, as well as their on-
ing connection types:
going development, the available applications may
Android Auto
not function on all mobile devices. ŠKODA AUTO as-
Apple CarPlay
sumes no liability for their proper functioning.
MirrorLink
The scope of available applications and their func-
Mobile devices can be connected to the Infotain-
tionality is dependent on the type of Infotainment, as
ment via USB cable or Wi-Fi, as long as the mobile
well as the vehicle and country.
device supports it.
Information about ŠKODAapplications
› Connect the mobile device to the Infotainment via
Detailed information about ŠKODA applications can
a USB cable or browse and connect to a wireless
be found on the website after reading the following
network.
QR code or link:
› Tap the icon of the supported connection.
Telephone
Overview
Display menu
› Tap
Or:
106 Infotainment Amundsen › Telephone
› Tap
If, for example, the digits 32 are entered, contacts
with the letter sequence DA, FA, EB etc. are dis-
If the menu phone is not displayed, check wheth-
played next to the numeric keypad.
er the mobile device is connected.
List of telephone contacts
The list of telephone contacts is imported from the
connected main telephone.
› To display the contact list in the phone menu, tap
on
› To search within the list, tap on Enter contact .
› Enter the details you wish to fiÄd.
› To establish a connection with a contact, tap the
functional area showing the desired contact.
If a contact has multiple telephone numbers, select
A
Name of the connected telephone
the telephone number from the displayed list.
▶ Tap: Show list of previously connected phones
› To display the details for a contact, tap .
B
Name of telephone service providers
▶ If the symbol is displayed in front of the name,
Establish a connection to the voice mailbox num-
roaming is active.
ber
› In the Phone menu, tap on
C
Preset buttons for preferred contacts
Change the main telephone with the additional
Telephone conversation
telephone
Depending on the context of the telephone conver-
sation, the following functions can be selected:
Enter telephone number
End connection / reject incoming call / end call
Contact list
Answer an incoming call / return to the held call
Text messages / emails
/
Switch the ringer off / on
Hold a call
Call lists
/
Switch the microphone off / on
Settings
Show details of the caller
Reject an incoming call using an SMS message
Answer a call from the second telephone during
Conditions for connecting a telephone with
a call on the fiÙst telephone
Infotainment
The ongoing call on the fiÙst telephone is termi-
nated by accepting the call.
✓ The Bluetooth® function of the Infotainment and
the telephone needs to be switched on.
› To switch the call tone from the speakers to the
telephone, go to telephone in the menu and tap on
The Bluetooth® function of the Infotainment is
speakerphone .
switched on in the menu item
Manage mo-
bile devices
Bluetooth.
› To switch the call tone from the telephone to the
speakers, tap
✓ Visibility of the Infotainment is switched on.
The visibility of the Infotainment is switched on in
Conference call
the menu item
Manage mobile devices
A conference call is a joint telephone conversation
Visibility.
with a minimum of three and a maximum of six par-
ticipants.
✓ The telephone is within signal range of the Info-
tainment's Bluetooth® unit.
› Make the next call during an ongoing conversation/
✓ The telephone is compatible with Infotainment.
conference.
Or:
Telephone operation
› Accept a new incoming call by tapping
›
To start a conference call, tap
Enter telephone number
During an ongoing conference call, the following
› In the Phone menu, tap on .
functions can be selected depending on the context:
› Enter the telephone number using the numeric
Hold the conference call and leave temporarily
keypad that is displayed.
(the conference will continue in the background)
The displayed numeric keypad can also be used
Return to the held conference call
for searching for contacts.
Infotainment Amundsen › T
elephone
107
/
Switch the microphone off / on
› Select the desired e-mail.
End conference call
› To switch graphic ÄotificatioÄs regarding the re-
Show details of the conference call
ceipt of a new email on or off, tap in the Phone
In the details of the conference call, depending on
menu New message notifications .
the connected telephone, the following functions
can be selected:
Show details of the conference call partici-
Settings for Infotainment telephone functions
pants
Telephone-Infotainment-Connection types
End conversation with the conference call par-
The way in which the telephone is connected de-
ticipant
pends on the number of phones currently connected
Conversation with a participant outside of the
to the Infotainment:
conference call
▶ No telephone - The telephone is connected as a
Send a text message
main telephone.
› In the Telephone
menu, tap Messages
New
▶ One telephone - The telephone is connected as an
SMS .
additional telephone.
› Write a text message and oÄfiÙm; a view of the
▶ Two telephones - Select the telephone to be re-
message is displayed.
placed.
The message can be edited when the text area
› To switch between the main telephone and the
within the view is tapped.
additional telephone, tap on in the Phone menu.
› Search for or select the recipient of the message.
Connect the telephone to Infotainment
› Add more recipients or oÄfiÙm selected recipi-
› Find available Bluetooth® devices on the phone.
ents.
› Select the Infotainment Bluetooth® unit.
› Tap on Send .
The unit name can be determined by the menu
Display received text messages
item
Manage mobile devices
Device name:.
› In the Telephone
menu, tap Messages
or
› oÄfiÙm the PIN; enter it if necessary and then
oÄfiÙm.
› Messages that are received are displayed as indi-
Connect Infotainment to a non-paired telephone -
vidual messages or as messages in a conversation,
no telephone is connected
depending on the following setting.
› Tap on
To switch the display of messages in a conversa-
Or:
tion on or off, tap in the Phone
menuShow messag-
es as conversation .
› Tap on
› Follow the instructions in the Infotainment screen.
› To switch graphic ÄotificatioÄs regarding the re-
ceipt of a new message on or off, tap in the Phone
Connecting Infotainment to a non-paired tele-
menu New message notifications .
phone - another telephone is connected
Infotainment offeÙs the possibility to read the
› Tap on
Manage mobile devices.
text message (context-dependent) by means of the
› Select the desired device from the list of available
generated Infotainment voice if is tapped.
devices.
› Select the desired Bluetooth® pÙofile.
Send e-mails
› oÄfiÙm the PIN; enter it if necessary and then
› In the Telephone
menu, tap Emails
New
oÄfiÙm.
emails .
› Write an e-mail and oÄfiÙm that an e-mail is dis-
The telephone is connected as an additional tele-
played.
phone.
The text can be edited when the text area within
Or:
the view is tapped.
› If two telephones are connected to the Infotain-
› Search for or select the recipient of the email.
ment, select the telephone to be replaced.
› Add more recipients or oÄfiÙm selected recipi-
Connect Infotainment to a previously paired tele-
ents.
phone
› Enter the subject of the e-mail.
›
Manage mobile devices .
› Tap on Send .
Or:
Show received e-mails
› In the Telephone
menu, tap Emails
108 Infotainment Amundsen › Wi-Fi
Select mobile phone .
› For setting the Infotainment ringtone in the
› Select the desired device from the list of previous-
phone menu select the ringtone .
ly connected devices.
› Select the ringtone.
The telephone is connected as an additional tele-
Number for the voice mailbox
phone.
› For setting the voice mailbox number in the
phone
menu Mailbox number: .
Or:
› Enter the voice mailbox number.
› If two telephones are connected to the Infotain-
ment, select the telephone to be replaced.
Turn the graphic notice regarding receiving a new
message/email on or off
Manage preset buttons for preferred contacts
When the feature is on, the new message icon ap-
pears on the status bar and in the feature area for
the messages when a new message/e-mail is re-
ceived.
› In the Telephone
menu New message notifications .
Simultaneous calls
This applies to some countries.
Depending on the connected telephone, it is possible
to answer the next incoming call and hold the previ-
ous call.
› To save the desired preset button, hold A .
› To switch on simultaneous calls, tap on telephone
› Select a contact from the displayed list.
Parallel talks.
› If the contact contains multiple telephone num-
bers, choose the desired telephone number.
Wi-Fi
› To display the menu for deletion, go to the phone
menu and tap on Manage favourites .
Functionality
› To delete one preset, tap on the list entry and con-
The Wi-Fi can be used for the internet connection or
fiÙm the deletion.
for the SmartLinkConnection.
Or:
The Infotainment hotspot can connect up to 8 mo-
› To delete all station buttons, tap Clear all and oÄfiÙm
bile devices. At the same time, the Infotainment can
the deletion.
be connected to another hotspot.
Import telephone contacts
› To display the list of connected mobile devices, tap
After fiÙst connecting the main telephone with Info-
Wi-Fi Infotainment system as hotspot Connected devi-
tainment, telephone contacts will start to be impor-
ces.
ted into the Infotainment memory.
Infotainment can import up to 5000 telephone con-
Overview of available hotspots
tacts together with contact pictures. Each contact
can include max. 5 telephone numbers.
Display available hotspots
Depending on the type of telephone, import oÄfiÙ-
› Tap
Wi-Fi Wi-Fi:.
matioÄ may be required.
Update telephone contacts
When re-connecting the telephone with Infotain-
ment, an automatic update of the list is carried out.
› For manual update of the list in the phone
menu tap on Import contacts .
Sort contacts in the phone book
› In the Telephone
menu Sort by: Tap and select the
sorting type.
Ringtone
A
Previously connected hotspots
Some phones do not allow the use of the telephone
B
Available hotspots
ringtone; instead, the Infotainment ringtone is used.
C
The hotspot supports the WPS connection
Infotainment Amundsen › Wi-Fi 109
Currently connected hotspot
Activate/deactivate data transfer between the In-
fotainment and the connected device
Delete information about the hotspot connection
› To turn data transmission on or off, tap
Wi-Fi signal strength of the hotspot
Wi-Fi Infotainment system as hotspot Connected devices
The Wi-Fi signal from the hotspot is not available
Change the name of the Infotainment hotspot
▶ Tap
Wi-Fi Infotainment system as hotspot Network
name:.
Function restriction
▶ Enter the name and oÄfiÙm.
The Infotainment system can only be connected to a
Change password for connection to Infotainment
hotspot with WPA2 access protection.
hotspot
The password must be a minimum of 12 and a maxi-
Restriction of the Wi-Fi connection
mum of 63 characters.
In some countries, the Wi-Fi connection is restric-
ted for legal reasons. When crossing the border of
▶
Wi-Fi Infotainment system as a hotspot Network key .
the country in question, the connection with a mo-
▶ Enter and oÄfiÙm the password.
bile device connected via Wi-Fi can be ended or
restricted.
Quick connection of Infotainment to the mobile
device hotspot
Find out about ouÄtÙû-speifi legal restrictions.
› On the mobile device, turn on the hotspot, its visi-
If necessary, switch off the Wi-Fi manually.
bility, and the option for WPS connection.
›
Wi-Fi Wi-Fi: Tap WPS quick connection (WPS button).
Settings
Automatic WPS connection
› Tap
Wi-Fi Quick connection to Infotainment system.
Connect a mobile device to the Infotainment hot-
spot
› In the mobile device, switch on the option for con-
nection via WPS.
› Turn on the Infotainment’s Wi-Fi hotspot in the
menu item
Wi-Fi Infotainment system as hotspot
› Wait for the connection to be established and, if
Use as hotspot.
necessary, oÄfiÙm the respective messages.
› Turn on the Wi-Fi on the mobile device.
Manual WPS connection
› In the list of available Wi-Fi devices, look for Info-
› In the mobile device, switch on the option for con-
tainment Wi-Fi.
nection via WPS PIN.
The name of the Infotainment is taken from the
The mobile device display will show the WPS PIN
menu item
Wi-Fi Infotainment system as hotspot
for connecting to the Infotainment.
Network name:.
› Tap
Wi-Fi Quick connection to Infotainment system
› Select the Infotainment hotspot and enter the re-
WPS PIN.
quired password.
› Enter the WPS PIN in the Infotainment and con-
The password for connecting to the Infotainment
fiÙm.
hotspot is taken from the menu item
Wi-
› Wait for the connection to be established and, if
Fi Infotainment system as hotspot Network key.
necessary, oÄfiÙm the respective messages.
› oÄfiÙm the connection.
Automatic connection using the QR code
Connect Infotainment to the mobile device hot-
›
Wi-Fi Tap quick connection with infotainment system .
spot
› In the mobile device, switch on the option for con-
› Turn on the Infotainment’s Wi-Fi unit in the menu
nection via QR Code.
item
Wi-Fi WLAN: WiFi active switch on
› With the mobile device, read the QR code dis-
› Select the desired hotspot in the list of available
played on the Infotainment screen.
hotspots.
› Wait for the connection to be established and, if
› Enter the password for connecting to mobile devi-
necessary, oÄfiÙm the respective messages.
ces.
Tips for a perfect connection
Infotainment stores passwords for previously
connected hotspots.
▶ Keep only the hotspot to be connected switched
on and switch off the other hotspots.
Security level of the Infotainment hotspot
The security level is set at WPA2 and cannot be
▶ Delete unused hotspots. This shortens the time re-
changed.
quired to establish a connection.
▶ For some hotspots, the connection takes longer, so
wait for the connection to fiÄish.
110 Infotainment Amundsen › SmartLink
▶
If the connection is interrupted, recheck the availa-
Android Auto
ble hotspots and repeat the connection.
SmartLink
Functionality
SmartLink offeÙs the ability to display and operate
eÙtified applications from a connected mobile de-
vice in the Infotainment screen.
eÙtifiatioÄ may be conditional upon the use of the
Overview of running applications, phone calls, in-
latest update to the particular SmartLink application.
coming text messages, and more.
Applications include, for example, apps for route
Turn on voice control (Google Voice)
guidance, telephoning, listening to music, etc.
Mobile devices can be connected via a USB cable or
Apple CarPlay
WiFi.
Supported connection types
SmartLink supports the following connection types:
▶ Android Auto
▶ Apple CarPlay
▶ MirrorLink
Overview of the SmartLink connection
A
List of available applications
Menu SmartLink
› Tap
B
Depending on the duration of operation:
▶ Tap: Return to the menu Apple CarPlay
▶ Hold: Turn on voice control (Siri)
MirrorLink
A
Previously connected device
B
Currently connection device
Display information about SmartLink
Disconnection of the active connection
It is not possible to operate the application while
driving
Disconnection of the active connection
Return to the menu SmartLink
Settings in SmartLink menu
List of running applications
Display of the last running application in connec-
ted mobile devices
Settings
Infotainment Amundsen › SmartLink 111
Connection conditions
Restriction
General connection conditions
Restriction of the Wi-Fi connection
✓ The mobile device supports the type of Smar-
In some countries, the Wi-Fi connection is restric-
tLink connection Android Auto, Apple CarPlay or
ted for legal reasons. When crossing the border of
MirrorLink.
the country in question, the connection with a mo-
✓ Mobile devices, as well as the type of SmartLink
bile device connected via Wi-Fi can be ended or
connection, are supported in the respective mar-
restricted.
ket.
Find out about ouÄtÙû-speifi legal restrictions.
✓ Some connected mobile devices require the mo-
If necessary, switch off the Wi-Fi manually.
bile device to be “unlocked”.
Restriction of SmartLink applications while driving
Conditions for Android Auto
For reasons of safety, the operation of some Smar-
✓ The device to be connected must have Android
tLink applications while driving is not possible or only
Auto connection.
limited.
A list of devices, supported regions and applica-
Restriction of the navigation function
tions that support the Android Auto connection
If route guidance is currently being carried out
can be found on the Google, Inc. website.
through Infotainment, this is ended when you start
✓ The Android Auto application needs to be instal-
route guidance in the Apple CarPlay application.
led on the mobile device.
If there is route guidance in the Apple CarPlay appli-
✓ Some applications require the data connection in
cation, it is ended by starting the destination guid-
the mobile device to be turned on.
ance using Infotainment.
✓ Connect the mobile device for the fiÙst time
when the vehicle is stationary.
SmartLink settings
Conditions for Apple CarPlay
✓ The device to be connected must have Apple
Apple CarPlay - Connection via USB
CarPlay connection.
› Turn on the Infotainment.
A list of devices, supported regions and applica-
› Turn on the mobile device.
tions that support the Apple CarPlay connection
› Connect the mobile device to the front USB input
can be found on the Apple Inc website.
using a cable.
✓ Siri voice control is on.
› Choose to connect via Apple CarPlay.
✓ The data connection in the mobile device is
Apple CarPlay - Connection via Wi-Fi from Info-
switched on.
tainment
Conditions for MirrorLink
› Turn on Bluetooth® and Bluetooth® visibility in the
✓ The device to be connected must have MirrorLink
Apple mobile device.
connection.
› Tap on
Manage mobile devices.
A list of devices and applications that support the
› In the displayed list, look for and select the desired
MirrorLink connection can be found on the web-
device with the symbol
sites of Car Connectivity Consorcium®.
› Follow the instructions on the Infotainment screen
✓ The MirrorLink application needs to be installed
and oÄfiÙm the Bluetooth® pairing.
on the mobile device.
› If another device is connected to the Infotainment,
✓ Some applications require the data connection in
select the device to be replaced.
the connected mobile device to be turned on.
Apple CarPlay - Connect via Wi-Fi from mobile de-
vices
To establish a connection, the following conditions
Operation
must be met:
Operation of the running MirrorLink application
✓ The minimum iOS version is 9.
Display of control surfaces at the bottom
✓ No other mobile device can be connected via
Display of control surfaces at the top
SmartLink.
Return to the menu MirrorLink
✓ Wi-Fi and Bluetooth® functionality is switched on
in the Infotainment system.
› In the mobile device, turn on the CarPlay function.
› Press and hold the
button on the multifunction
steering wheel.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст