Skoda Scala (2021 year). Manual in english — page 4
70
Infotainment Swing › Telephone
Connection set-up
If the menu phone is not displayed, check wheth-
er the mobile device is connected.
Connect a mobile device to Infotainment
› Find available Bluetooth® devices in the mobile de-
vice.
› Select the Infotainment Bluetooth® unit.
The name of the unit can be found under the menu
item
Bluetooth Name:.
› oÄfiÙm the PIN; enter it if necessary and then
oÄfiÙm.
Connect Infotainment to a non-paired mobile de-
vice
A
Name of the connected phone
›
Select mobile phone Tap
▶ Tap: View the list of previously connected
› Select the desired device in the list of available de-
phones
vices.
B
Name of the telephone service provider
› Select the desired Bluetooth® pÙofile.
C
Station buttons for preferred contacts
› oÄfiÙm the PIN; enter it if necessary and then
oÄfiÙm.
Change the main telephone with the additional
› If two devices are connected to the Infotainment,
telephone
select the device to be replaced.
Enter phone number
Connect Infotainment to a previously connected
Contact list
mobile device
Call lists
› Tap on
Select mobile phone.
Switch on voice control of the connected phone
› Select the desired device from the list of previous-
ly connected devices.
Settings
The selected device is connected via the most re-
cently used Bluetooth® pÙofile.
Conditions for connecting a telephone with
› If two devices are connected to the Infotainment,
select the device to be replaced.
Infotainment
SmartLink connection
✓ The Bluetooth® function of the Infotainment and
Infotainment provides the ability to connect Smar-
the telephone needs to be switched on.
tLink to compatible mobile devices using the follow-
The Bluetooth® function of the Infotainment is
ing connection types:
switched on in the menu item
Bluetooth
Android Auto
Bluetooth.
Apple CarPlay
✓ Visibility of the Infotainment is switched on.
MirrorLink
The visibility of the Infotainment is switched on in
Mobile devices can be connected to the Infotain-
the menu item
Bluetooth Visibility:.
ment via USB cable or Wi-Fi, as long as the mobile
✓ The telephone is within signal range of the Info-
device supports it.
tainment's Bluetooth® unit.
✓ The telephone is compatible with Infotainment.
› Connect the mobile device to the Infotainment via
a USB cable or browse and connect to a wireless
network.
Telephone operation
› Tap the icon of the supported connection.
Enter telephone number
› In the Phone menu, tap on .
Telephone
› Enter the telephone number using the numeric
keypad that is displayed.
Overview
The displayed numeric keypad can also be used
Display menu
for searching for contacts.
› Tap
If, for example, the digits 32 are entered, contacts
Or:
with the letter sequence DA, FA, EB etc. are dis-
played next to the numeric keypad.
› Tap
Infotainment Swing › T
elephone
71
List of telephone contacts
In the details of the conference call, depending on
The list of telephone contacts is imported from the
the connected telephone, the following functions
connected main telephone.
can be selected.
› To display the contact list in the phone menu, tap
Show details of the conference call partici-
on
pants
End conversation with the conference call par-
› To search within the list, tap on Find .
ticipant
› Enter the details you wish to fiÄd.
Conversation with a participant outside of the
› To establish a connection with a contact, tap the
conference call
functional area showing the desired contact.
If a contact has multiple telephone numbers, select
the telephone number from the displayed list.
Settings for Infotainment telephone functions
› To display the details for a contact, tap .
Telephone-Infotainment-Connection types
The way in which the telephone is connected de-
Establish a connection to the voice mailbox num-
pends on the number of phones currently connected
ber
to the Infotainment:
› In the Phone menu, tap on
▶
No telephone - The telephone is connected as a
Telephone conversation
main telephone.
Depending on the context of the telephone conver-
▶ One telephone - The telephone is connected as an
sation, the following functions can be selected:
additional telephone.
End connection / reject incoming call / end call
▶ Two telephones - Select the telephone to be re-
Answer an incoming call / return to the held call
placed.
/
Switch the ringer off / on
› To switch between the main telephone and the
Hold a call
additional telephone, tap on in the Phone menu.
/
Switch the microphone off / on
Show details of the caller
Connect the telephone to Infotainment
Answer a call from the second telephone during
› Find available Bluetooth® devices on the phone.
a call on the fiÙst telephone
› Select the Infotainment Bluetooth® unit.
The ongoing call on the fiÙst telephone is termi-
The name of the unit can be found under the menu
nated by accepting the call.
item
Bluetooth Name:.
› To switch the call tone from the speakers to the
› oÄfiÙm the PIN; enter it if necessary and then
telephone, go to telephone in the menu and tap on
oÄfiÙm.
speakerphone .
Connect Infotainment to a non-paired telephone -
› To switch the call tone from the telephone to the
no telephone is connected
speakers, tap
›
Tap on
Conference call
Or:
A conference call is a joint telephone conversation
with a minimum of three and a maximum of six par-
› Tap on
ticipants.
› Follow the instructions in the Infotainment screen.
› Make the next call during an ongoing conversation/
Connecting Infotainment to a non-paired tele-
conference.
phone - another telephone is connected
Or:
› Tap on
Select mobile phone
› Select the desired device from the list of available
› Accept a new incoming call by tapping
devices.
› To start a conference call, tap
› Select the desired Bluetooth® pÙofile.
During an ongoing conference call, the following
› oÄfiÙm the PIN; enter it if necessary and then
functions can be selected depending on the context:
oÄfiÙm.
Hold the conference call and leave temporarily
The telephone is connected as an additional tele-
(the conference will continue in the background)
phone.
Return to the held conference call
Or:
/
Switch the microphone off / on
End conference call
› If two telephones are connected to the Infotain-
Show details of the conference call
ment, select the telephone to be replaced.
72
Infotainment Swing › Wi-Fi
Connect Infotainment to a previously paired tele-
Ringtone
phone
Some phones do not allow the use of the telephone
›
Select mobile phone .
ringtone; instead, the Infotainment ringtone is used.
› Select the desired device from the list of previous-
› To set the Infotainment ringtone in the phone
ly connected devices.
menu, tap
User profile select the ringtone .
The telephone is connected as an additional tele-
› Select the ringtone.
phone.
Voice mailbox number
Or:
› To set the voice mailbox number in the phone
› If two telephones are connected to the Infotain-
menu, tap User profile Mailbox number: .
ment, select the telephone to be replaced.
› Enter the voice mailbox number.
Manage preset buttons for preferred contacts
Simultaneous calls
This applies to some countries.
Depending on the connected telephone, it is possible
to answer the next incoming call and hold the previ-
ous call.
› To switch on simultaneous calls, tap on telephone
Parallel talks.
Wi-Fi
› To save the desired preset button, hold A .
Functionality
› Select a contact from the displayed list.
Wi-Fi can be used for the SmartLink connection.
› If the contact contains multiple telephone num-
bers, choose the desired telephone number.
The Infotainment hotspot can connect up to 3 mo-
bile devices.
› To display the menu for deletion, go to the phone
menu and tap on Manage favourites .
› To display the list of connected mobile devices, tap
Wi-Fi Connected devices .
› To delete one preset, tap on the list entry and con-
fiÙm the deletion.
Or:
Restriction
› To delete all station buttons, tap Tap All and oÄfiÙm
Restriction of the Wi-Fi connection
the deletion.
In some countries, the Wi-Fi connection is restric-
Import telephone contacts
ted for legal reasons. When crossing the border of
After fiÙst connecting the main telephone with Info-
the country in question, the connection with a mo-
tainment, telephone contacts will start to be impor-
bile device connected via Wi-Fi can be ended or
ted into the Infotainment memory.
restricted.
Infotainment can import up to 2000 telephone con-
Find out about ouÄtÙû-speifi legal restrictions.
tacts together with contact pictures. Each contact
If necessary, switch off the Wi-Fi manually.
can include max. 5 telephone numbers.
Depending on the type of telephone, import oÄfiÙ-
Settings
matioÄ may be required.
Connect a mobile device to the Infotainment hot-
Update telephone contacts
spot
When re-connecting the telephone with Infotain-
› Turn on the Infotainment Wi-Fi hotspot in the
ment, an automatic update of the list is carried out.
menu item
Wi-Fi Wi-Fi hotspot.
› For manual update of the list in the phone
› Turn on the Wi-Fi on the mobile device.
menu User profile tap on Import contacts .
› In the list of available Wi-Fi devices, look for Info-
Sort contacts in the phone book
tainment Wi-Fi.
› In the Telephone
menu User profile Sort by: Tap and
The name of the Infotainment is taken from the
select the sorting type.
menu item
Wi-Fi Network name:.
› Select the Infotainment hotspot and enter the re-
quired password.
Infotainment Swing › SmartLink
73
The password for connecting to the Infotainment
Display information about SmartLink
hotspot is taken from the menu item
Wi-
Disconnection of the active connection
Fi Network key.
Disconnection of the active connection
› oÄfiÙm the connection.
Settings in SmartLink menu
Security level of the Infotainment hotspot
The security level is set at WPA2 and cannot be
Android Auto
changed.
Change password for connection to Infotainment
hotspot
The password must be a minimum of 8 and a maxi-
mum of 63 characters.
▶ Tap
Wi-Fi Network key.
▶ Enter the password and oÄfiÙm.
SmartLink
Overview of running applications, phone calls, in-
Functionality
coming text messages, and more.
Turn on voice control (Google Voice)
SmartLink offeÙs the ability to display and operate
eÙtified applications from a connected mobile de-
Apple CarPlay
vice in the Infotainment screen.
eÙtifiatioÄ may be conditional upon the use of the
latest update to the particular SmartLink application.
Applications include, for example, apps for route
guidance, telephoning, listening to music, etc.
Mobile devices can be connected via a USB cable or
WiFi.
Supported connection types
SmartLink supports the following connection types:
A
List of available applications
▶ Android Auto
▶ Apple CarPlay
B
Depending on the duration of operation:
▶ MirrorLink
▶ Tap: Return to the menu Apple CarPlay
▶ Hold: Turn on voice control (Siri)
Overview of the SmartLink connection
MirrorLink
Menu SmartLink
› Tap
Or:
› Tap
It is not possible to operate the application while
driving
Return to the menu SmartLink
List of running applications
Display of the last running application in connec-
A
Previously connected device
ted mobile devices
B
Currently connection device
Settings
74
Infotainment Swing › SmartLink
Connection conditions
Restriction
General connection conditions
Restriction of the Wi-Fi connection
✓ The mobile device supports the type of Smar-
In some countries, the Wi-Fi connection is restric-
tLink connection Android Auto, Apple CarPlay or
ted for legal reasons. When crossing the border of
MirrorLink.
the country in question, the connection with a mo-
✓ Mobile devices, as well as the type of SmartLink
bile device connected via Wi-Fi can be ended or
connection, are supported in the respective mar-
restricted.
ket.
Find out about ouÄtÙû-speifi legal restrictions.
✓ Some connected mobile devices require the mo-
If necessary, switch off the Wi-Fi manually.
bile device to be “unlocked”.
Restriction of SmartLink applications while driving
Conditions for Android Auto
For reasons of safety, the operation of some Smar-
✓ The device to be connected must have Android
tLink applications while driving is not possible or only
Auto connection.
limited.
A list of devices, supported regions and applica-
tions that support the Android Auto connection
SmartLink settings
can be found on the Google, Inc. website.
✓ The Android Auto application needs to be instal-
Apple CarPlay - Connection via USB
led on the mobile device.
› Turn on the Infotainment.
✓ Some applications require the data connection in
› Turn on the mobile device.
the mobile device to be turned on.
› Connect the mobile device to the front USB input
✓ Connect the mobile device for the fiÙst time
using a cable.
when the vehicle is stationary.
› Choose to connect via Apple CarPlay.
Conditions for Apple CarPlay
Apple CarPlay - Connection via Wi-Fi from Info-
✓ The device to be connected must have Apple
tainment
CarPlay connection.
› Turn on Bluetooth® and Bluetooth® visibility in the
A list of devices, supported regions and applica-
mobile device.
tions that support the Apple CarPlay connection
› Tap on
mobile devices.
can be found on the Apple Inc website.
› In the displayed list, look for and select the desired
✓ Siri voice control is on.
device with the symbol
✓ The data connection in the mobile device is
› Follow the instructions on the Infotainment screen
switched on.
and oÄfiÙm the Bluetooth® pairing.
Conditions for MirrorLink
› If another device is connected to the Infotainment,
select the device to be replaced.
✓ The device to be connected must have MirrorLink
connection.
Apple CarPlay - Connect via Wi-Fi from mobile de-
A list of devices and applications that support the
vices
MirrorLink connection can be found on the web-
To establish a connection, the following conditions
sites of Car Connectivity Consorcium®.
must be met:
✓ The MirrorLink application needs to be installed
✓ The minimum iOS version is 9.
on the mobile device.
✓ No other mobile device can be connected via
✓ Some applications require the data connection in
SmartLink.
the connected mobile device to be turned on.
✓ Wi-Fi and Bluetooth® functionality is switched on
in the Infotainment system.
Operation
› In the mobile device, turn on the CarPlay function.
› Press and hold the
button on the multifunction
Operation of the running MirrorLink application
steering wheel.
Display of control surfaces at the bottom
The Infotainment screen displays a connection
Display of control surfaces at the top
message with the name of the Bluetooth® unit of
Return to the menu MirrorLink
the Infotainment.
› Find available Bluetooth® devices on the phone.
› Select the Infotainment Bluetooth® unit.
› If necessary, oÄfiÙm the PIN.
Infotainment Swing › SmartLink
75
› In the Infotainment screen, select the connection
› Turn on the Infotainment Wi-Fi hotspot in the
type Apple CarPlay.
menu item
Wi-Fi Wi-Fi hotspot.
› In the list of available Wi-Fi devices, look for Info-
Apple CarPlay - Disconnect
tainment Wi-Fi.
› In the Apple CarPlay menu, tap on the function
area “ŠKODA”.
› Enter the required password.
› Tap on
› With some mobile devices, communication be-
tween the device and the Infotainment in the noti-
Android Auto - Connection via USB
fiatioÄ bar of the mobile device must be con-
› Turn on the Infotainment.
fiÙmed.
› Turn on the mobile device.
› Tap on
mobile devices.
› Connect the mobile device to the front USB input
› From the list of available devices, select the de-
using a cable.
sired device with the symbol.
› Choose to connect via Android Auto.
MirrorLink - Disconnect
Android Auto - Connection via Wi-Fi from Info-
› In the MirrorLink menu, tap on
tainment
› Tap on
› Tap on
mobile devices.
Change to another device / connection type
› Select the desired device from the list of available
Infotainment allows you to switch between currently
devices.
connected devices and the connection type.
› Select the Bluetooth®hands-free pÙofile.
› Tap on
› oÄfiÙm the PIN; enter it if necessary and then
oÄfiÙm.
› Select the desired device or connection type.
› If another device is connected to the Infotainment,
select the device to be replaced.
› From the list of known devices, select the desired
device with the symbol.
Android Auto - Connect via Wi-Fi from mobile de-
vices
To establish a connection, the following conditions
must be met:
✓ The minimum Android version is 5.
✓ No other mobile device can be connected via
SmartLink.
✓ Wi-Fi and Bluetooth® functionality is switched on
in the Infotainment system.
› Find available Bluetooth® devices on the phone.
› Select the Infotainment Bluetooth® unit.
› If necessary, oÄfiÙm the PIN.
› In the Infotainment screen, select the connection
type Android Auto.
Android Auto - Disconnect
› In the Android Auto
menu, tap “Return to SKO-
DA”.
› Tap on
MirrorLink - Connection via USB
› Turn on the Infotainment.
› Turn on the mobile device.
› Connect the mobile device to the front USB input
using a cable.
› Choose to connect through MirrorLink.
MirrorLink - Connection via Wi-Fi from Infotain-
ment
› Turn on Wi-Fi and visibility in the mobile device.
76
Infotainment Bolero › Infotainment overview
Sound settings
Infotainment Bolero
The Infotainment sound is set in the menu
Infotainment overview
The following menu items can be set:
▶ Setting the equalizer
▶ Adjusting the volume ratio
▶ Volume adjustment of individual Infotainment
functions
The volume can be adjusted on e.g. one of the fol-
lowing menu items:
▶ Volume adjustment of voice commands
▶ Setting the maximum volume when Infotainment
is turned on
▶ Speed-dependent volume setting
▶ Setting the Infotainment to mute with the park-
ing aid switched on
A
Touchscreen
Depending on the equipment, the following ad-
Control dial left
vanced sound settings can be set
▶ Press: Switch Infotainment oÄ/off
▶ Setting space optimisation
▶ Turn: Set volume
▶ Setting the audio pÙofiles according to genre
Control dial right
▶ Adjusting the subwoofer volume
▶ Press: oÄfiÙm menu item
CoÄfiguratioÄ wizard
▶ Turn: select menu item/set value
The oÄfi£uÙatioÄ wizard helps to set certain Info-
Radio menu
tainment functions.
Media menu
The oÄfi£uÙatioÄ assistant is automatically displayed
Overview of Infotainment menus
if the ignition is switched on and if there are at least
two menu items that have not been set up after
Phone menu
switching on the Infotainment.
SmartLink menu
› To switch off the automatic display, when the
▶ Tap: Display menu
oÄfi£uÙatioÄ assistant is displayed tap Don't show
▶ Hold: Switch voice control of the SmartLink
again .
application on / off
› For manual display tap
Configuration wizard .
Information about vehicle settings
Set up menu MENU
The position of the functional surfaces in the MENU
menu can be customized as follows:
System
›
Press and hold the desired functional surface until
Limitation
it is free.
› Move the functional surface to a diffeÙeÄt position.
For safety reasons, operation of some Infotainment
functions while driving is not possible or is restricted.
Safely disconnect the connected USB device
The Infotainment system indicates this by means of
NOTICE
a message in the screen.
Risk of damage to the data on the connected USB
device!
To safely disconnect a USB device, proceed as fol-
Basic settings
lows:
›
Remove safely .
Setting basic functions
› Select the desired device.
The following Infotainment functions are set in the
menu:
› Disconnect the USB device.
▶ Time and date
If it is not possible to safely disconnect the de-
vice, switch off the Infotainment and disconnect the
▶ Language
device.
▶ Units
▶ Restore factory settings
Infotainment Bolero › Screen
77
Troubleshooting
Dragging up or down with two fiÄgers
Infotainment not responding
▶ Quickly review the list
If the infotainment does not respond, restart it as
of phone contacts
follows:
› Hold for longer than 10 s.
› Wait for the restart to complete.
System update
Settings
We recommend having the system update carried
out by a specialist company.
The following basic screen functions are set in the
menu
Screen:
The system update ensures optimal function of the
Infotainment system, e.g. compatibility with new
▶ Brightness level of the screen
phones.
▶ Switch off the screen
Determine system version
▶ Display the time
› Tap
System information.
▶ oÄfiÙmatioÄ sounds and animations
Screen
Infotainment keyboard
Overview
Keypad overview
The arrangement of the keyboard characters de-
pends on the set infotainment language.
Depending on the context, the following types are
used in infotainment:
▶ Alphanumeric
▶ Numeric
▶ Keyboard for input
▶ Keyboard for search
A
Status bar
B
Bar with the functional surfaces of the displayed
menu
C
Display of the control centre
D
Other pages of the menu
Operation
Keypad example
NOTICE
A
Input line
Danger of screen damage!
▶ The Infotainment screen is operated by touching it
▶ Delete characters before the cursor
lightly with your fiÄger.
▶ Tap: delete the last character
In principle, operation by touch is identical to the op-
▶ Hold: delete all characters one after the other
eration of a mobile phone.
Show list of searched entries
The following operating modes are speifi to the In-
B
Keypad functional surfaces
fotainment system.
▶ Switch to lowercase/uppercase
▶
/
Switch to the language keypad
▶
Switch to the numeric and character keypad
▶ Show additional keyboard languages
▶ Insert spaces
78
Infotainment Bolero › Control centre
▶ Hold: Show more character variants
Setting up additional keyboard languages
▶ Move cursor to the left
› Tap
Additional keypad languages.
▶ Move cursor to the right
▶
oÄfiÙm the entered characters
Control centre
Numeric keypad
Overview
Display of the control centre
› Press the bar at the
top of the screen and
drag down.
Keypad example
Closing the control centre
A
Input line
› Tap on
▶ Delete characters before the cursor
Or:
▶ Tap: delete the last character
› Wait 5 seconds.
▶ Hold: delete all characters
Control Centre
B
Keypad functional surfaces
The Infotainment control centre can be used for
quick access to the following functions:
▶
oÄfiÙm the entered characters
If it is possible depending on the context, alpha-
numeric characters can be entered by holding a
function area with the number.
Operation
The Infotainment keypad is used to enter characters,
letters and numbers.
The keypad will be automatically displayed when In-
A
Preferred functions
fotainment prompts for characters.
B
Setting the instrument and key illumination
Find
C
Setting the personal data protection level
During the character input, a search for correspond-
ing entries takes place.
The entry to be searched can be entered, including
Settings
diacritics.
› To display editing mode hold any function surface
The keypad will only provide characters that match
of the preferred feature.
the stored entries.
› To add the preferred feature, move the desired
› To display the searched entries, tap
feature from the top of the screen to the function-
Show additional keypad languages
al surface at the bottom of the screen.
To use the additional keypad languages, the desired
› To close edit mode, tap on .
languages must be set fiÙst.
› Tap or repeatedly tap the Ĕa£ symbol until the
Radio
desired language keypad is displayed.
Further character variants
Overview
› Press and hold the sign with the symbol
Display menu
› Select the desired symbol.
› Tap
Or:
Infotainment Bolero › Radio
79
› Tap
SCAN function
The function plays receivable stations of the selec-
Analogue and digital radio reception
ted frequency range in succession for a few seconds
each.
› To start automatic play press
Scan or the right
rotary control
› To end automatic play press or the right rotary
control
Find stations manually
Manual search is available for AM and FM stations.
› In the Radio main menu, tap
› To search in sequence, tap or next to the dis-
A
Select frequency range
played frequency range scale.
B
Depending on the frequency range
Or:
FM: Radio text
› Hold down the scroll mark on the frequency range
DAB: Radio text: name of the station group
scale and move it to the desired value.
C
Station buttons for preferred stations
Or:
List of available stations
›
Turn the right rotary control.
Show favourites
Show information about the station
Limitation
Search stations manually (valid for AM and FM)
Settings
▶ Infotainment supports digital radio reception in
DAB and DAB+ formats.
Infotainment supports digital radio reception in
▶ Car parks, tunnels, tall buildings or mountains can
DAB and DAB+ formats.
restrict radio reception.
List of available stations
▶ In the rear side windows, there are antennas for re-
ceiving the radio signal.
› Tap on
Played station
Covering the panes with foils or metal-coated la-
bels may affet the reception of the radio signal.
Station stored on the presets
A tÙaffi radio station is set
▶ The ŠKODA AUTO company assumes no responsi-
DAB signal is not available
bility for the availability, correct functioning and
Filter the stations in the list according to the
broadcast information of the RDS service.
programme type, e.g. culture, music, sports, etc.
FM: when the RDS function is switched on
Manual update of the station list
Settings
In the station list, information about the program
Save the station currently being listened to as a fa-
type and the type of the regional station can be dis-
vourite from the Radio main menu
played.
› Hold the desired station key for preferred stations
until the station is stored.
Operation
Save station to favourites from the list of available
stations
Select station
Applies to AM, FM and DAB frequency ranges.
› Hold the line with the name of the desired station.
› Tap the desired preset button.
Deleting favourites
› In the menu Radio
clear memory .
› To delete a station button for preferred stations,
tap the desired station button and oÄfiÙm the de-
letion.
› To delete all station buttons for preferred stations
Tap All and oÄfiÙm the deletion.
› Tap or at the top of the screen.
80
Infotainment Bolero › Radio
Function surfaces
Automatic change of frequency to a regionally
Applies to AM, FM and DAB frequency ranges.
linked FM station
Applies to the FM frequency range.
The variant for changing stations using the function
surface in the Radio menu is set as follows:
Infotainment provides the option of automatically
switching to a regionally linked FM station in case of
› In the menu Radio
Arrow buttons: .
signal loss of the FM station being listened to.
› Choose the change variant.
›
In the menu Radio
Advanced settings RDS Regional: .
Traffic reception (TP) for FM stations oÄ/off
› Select one of the following menu items:
Applies to the FM frequency range.
▶ Fix - When the signal is lost, another station must
› In the menu Radio
Traffic program (TP) .
be set manually.
Switch traffic reception for DAB stations oÄ/off
▶ Automatic - automatic selection of the station with
Applies to the DAB frequency range.
the best signal reception.
› In the Radio menu switch on the menu item
If reception is lost in the given region, Infotain-
Traffic program (TP) switch on
ment will automatically set another available region.
› In the menu Radio
Advanced settings DAB: Traffic program
Switch automatic frequency control (AF) oÄ/off
(TP) switch on / off
Applies to the FM frequency range.
Assigning a station logo
When the function is switched on and the signal of
Applies to AM, FM and DAB frequency ranges.
the FM station currently being listened to is weak,
Infotainment offeÙs the option to assign logos from
Infotainment automatically sets the same station to
the pictures on an external source to the station but-
a diffeÙeÄt frequency with a better signal.
tons.
› In the menu Radio
Advanced settings Automatic frequen-
For station logos, images in jpg, gif, png, bmp format
cy change (AF) .
with a maximum resolution of 500x500 pixels can be
Sort stations in the list of available stations
used.
Applies to the FM frequency range.
› In the menu Radio
Station logos .
› In the menu Radio
Advanced settings Station list: .
› Tap the desired preset button.
› Select the sorting of stations in alphabetical order
› Select the external source with the logo.
or by group.
› Find the desired logo and oÄfiÙm.
Turn oÄ/off radio text reception
Delete station logos
Applies to the FM and DAB frequency ranges.
Applies to AM, FM and DAB frequency ranges.
When the function is switched on and station pre-
› In the menu Radio
Station logos .
sets are displayed, detailed information about the
› To delete a logo, tap the desired preset button and
broadcast content of the station being listened to, or
oÄfiÙm the deletion.
the name of the station group for the DAB station, is
displayed.
› To delete all logos Tap All and oÄfiÙm the deletion.
› In the menu Radio
Radio text .
Switch oÄ/off autostore of logos for stations to be
stored to Favourites
Switch RDS oÄ/off
Applies to the FM and DAB frequency ranges.
Applies to the FM frequency range.
When the function is switched on, a station logo
The menu item is only available for some countries.
from the Infotainment memory is assigned when the
› In the menu Radio
Advanced settings Radio Radio Data
station is stored on a preset.
System (RDS) .
› In the menu Radio
Advanced settings Automatic storage
If the RDS function is disabled, the following menu
station logos .
items in FM station settings are not available:
Regional FM station logo
▶ TÙaffi program (TP)
Applies to the FM frequency range.
▶ Radio text
Infotainment provides the option of using ouÄtÙû-
▶ RDS Regional
speifi FM station logos.
▶ Automatic frequency change (AF)
› In the menu Radio
Advanced settings Region for station
▶ Regional station logo.
logo: .
▶ Sort stations in the list of available stations
› Choose country.
Switch program type display on / off
Applies to the FM and DAB frequency ranges.
Infotainment Bolero › Media
81
If the function is switched on, additional information
▶ When connecting an audio source, the source in-
on the broadcast program type (PTY) is displayed in
formation messages can be displayed. These mes-
the list of available stations. The programs can be fil-
sages must be observed and, if necessary, con-
teÙed based on this information.
fiÙmed.
▶ The national copyright laws that apply in your
Switching additional announcements of the DAB
country must be observed.
transmitter on / off
Applies to the DAB frequency range.
When the function is switched on, other announce-
Overview
ments are received as tÙaffi announcements. These
include e.g. weather news, sports reports, fiÄaÄial
Display menu
news etc.
› Tap
› In the menu Radio
Advanced settings Tap other DAB an-
Or:
nouncements .
› Tap
Enable/disable automatic programme tracking of a
DAB station
Applies to the DAB frequency range.
When the function is switched on and the DAB sta-
tion is lost, Infotainment automatically changes to
the same station with a better signal in a diffeÙeÄt
DAB station group.
› In the menu Radio
Advanced settings DAB - DAB program
tracking .
Turn oÄ/off automatic switching from a DAB sta-
A
Choose source
tion to the same FM station
Manage files / multimedia database
Applies to the DAB frequency range.
Settings
When the function is switched on and the DAB sta-
tion being listened to is lost, Infotainment automati-
cally changes to the same FM station. The symbol
Operating the Player
(FM) is displayed after the station name.
Operation - Basics
When the corresponding DAB station can be re-
ceived again, the station automatically changes from
FM to DAB.
› In the menu Radio
Advanced settings Tap Automatic
change DAB - FM .
Switch the slideshow function oÄ/off
Applies to the DAB frequency range.
When the function is switched on, the images broad-
cast by the station are displayed in the player.
› In the menu Radio
Advanced settings DAB slideshow .
A
Album image / symbol of the connected source
Tap: Start playback
Media
Tap: Pause
Within 3 seconds of starting playback, tap: play
What you should be mindful of
the previous song
▶ Do not save any important data or that which has
After 3 seconds from the start of playback, tap:
not been backed up on the connected audio sour-
to play the current title from the beginning
ces. ŠKODA assumes no responsibility for lost or
Hold: fast rewind within the track
damaged files or connected audio sources.
▶ When changing or connecting an audio source, this
Tap: play the next track
may cause sudden changes in volume. Reduce the
Hold: fast forward within the track
volume before changing or connecting an audio
source.
82
Infotainment Bolero › Media
Movement within the title is also possible by drag-
Media in the Apple iCloud will included in the list of
ging the fiģe٠over the timeline.
available media under the following conditions:
Extended operation
✓ The mobile device is not connected using Apple
Turn repeat playback of the current track oÄ/off
CarPlay.
Turn repeat playback of the current album/fold-
✓ The mobile device is connected to the Apple
er oÄ/off
iCloud.
Turn random playback of the current album/
Traffic
folder oÄ/off
› To turn oÄ/off tÙaffi monitoring during playback
of media files, go to the Media in the main menu
and tap on Traffic program (TP) .
Restriction
Safely disconnect the connected USB device
The availability of some media operation functions is
dependent on the connected source and the soft-
NOTICE
ware being used, e.g. Bluetooth®.
Risk of damage to the data on the connected USB
device!
To safely disconnect a USB device, proceed as fol-
Settings
lows:
› In the Media menu tap on
Safely remove USB .
Turn title playback including subfolders oÄ/off
› Select the desired device.
› In the Media menu tap on
Mix/Repeat including subfold-
› Disconnect the USB device.
ers. .
If it is not possible to safely disconnect the de-
Switch playback of online media from the Apple
vice, switch off the Infotainment and disconnect the
device on / off
device.
› To switching on / off in the menu media
tap
Include online media from the iPod device .
Supported sources and files
Supported sources
Source
Interface
Type
SpeifiatioÄ
File system
USB stick
HDD
(without special
software)
MSC
USB devices that
use the USB mass
storage support
FAT32
protocol
exFAT
USB 1.x; 2.x 3.x
Devices running
NTFS
USB
or higher with USB
the Android or
2.x support
Windows Phone
MTP
operating system
that support the
Media Transfer
Protocol
Devices with an
Apple
iOS operating sys-
HFS+
tem
Bluetooth® proto-
cols
Bluetooth® player
Bluetooth®
-
-
A2DP and AVRCP
(1.0
- 1.6)
Apple iAP1 protocol is not supported by Infotainment.
Infotainment Bolero › Media
83
Compatibility of mobile devices
It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile
device being tested. This check is carried out by using the following reference or by reading the QR code:
All information given is incidental and serves as information.
The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-
date of the Infotainment and the mobile devices.
Supported audio files
Compression for-
Codec type
File exten-
Max. bit rate
Max. sam-
Multi channels
mat
sion
[kbps]
pling rate
[kHz]
Mono, dual mono,
MPEG 1 Layer 3
mp3
32 - 320
32, 44, 48
Stereo, Joint
Stereo
MPEG
MPEG 2 Layer 3
16, 22, 24
Mono,
mp3
8 - 160
Stereo, Joint
MPEG 2.5 Layer 3
8, 11, 12
Stereo
Windows Media
8 - 384
8, 11, 12, 16,
Audio 9 and 9.1
22, 32, 44,
Windows Media
Mono, stereo,
WMA
wma
8 - 320
48
Audio 9.2
Joint stereo
Windows Media
32, 44, 48,
8 - 768
Audio 10
96
22, 24, 32,
AAC LC
8 - 640
44, 48
Mono,
ADTS
aac
AAC HE
8 - 320
16, 22, 24,
Stereo
AAC HEv2
16 - 64
32, 44, 48
8, 11, 12, 16,
22, 24, 32,
Mono, stereo,
FLAC
FLAC
Ĕa
-
44, 48, 64,
5.1, 7.1
88, 96
8, 11, 12, 16,
Mono,
RIFF
WAV
wav
64 - 3072
22, 24, 32,
Stereo
44, 48, 96
Mono, stereo,
SBC
Bluetooth A2DP
-
8 - 345
44, 48
Joint stereo
For files in MP4 format, only the soundtrack playback is carried out.
Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.
Supported playlists
Codec type
File extension
M3U
m3u
M3U8
m3u8
PLS
pls
WPL
wpl
ASX
asx
PLA
pls
84
Infotainment Bolero › Mobile device management
Mobile device management
Overview
Using mobile device management, devices can be
connected, disconnected, and interchanged.
All information given is incidental and serves as in-
View mobile device management
formation.
›
Select mobile phone Tap
The ŠKODA AUTO company cannot guarantee full
Or:
functionality and compatibility, e.g. due to a software
›
Tap Mobile devices .
update of the Infotainment and the mobile devices.
Bluetooth® compatibility of mobile devices
Due to the large number of mobile devices, it is not
possible to guarantee total Bluetooth® compatibility
with Infotainment. Bluetooth® compatibility depends
on the Bluetooth® version as well as the implementa-
tion of Bluetooth® protocols by the manufacturer of
the mobile device.
Applications in mobile devices
Mobile devices can be used to install applications
that allow you to view additional information on the
A
Connected / Previously connected devices
Infotainment screen, or to operate the Infotainment
B
Available devices
system.
The device enables a connection via the Blue-
Due to the variety of applications, as well as their on-
tooth®“hands-free pÙofile”
going development, the available applications may
The device is connected via the Blue-
not function on all mobile devices. ŠKODA AUTO as-
tooth®“hands-free pÙofile”
sumes no liability for their proper functioning.
The device enables a connection via the Blue-
tooth® audio pÙofile
The scope of available applications and their func-
The device is connected via the Bluetooth® audio
tionality is dependent on the type of Infotainment, as
pÙofile
well as the vehicle and country.
The device enables a SmartLinkconnection to be
Information about ŠKODAapplications
made via Android Auto
Detailed information about ŠKODA applications can
The device enables a SmartLinkconnection to be
be found on the website after reading the following
made via Apple CarPlay
QR code or link:
The device enables a SmartLinkconnection to be
made via MirrorLink
Remove the device from the list previously con-
nected devices
Limitations of mobile devices and applications
Availability of features
Connection set-up
The availability of certain features depends on the
type of mobile device, as well as that of the applica-
Connect a mobile device to Infotainment
tions installed.
› Find available Bluetooth® devices in the mobile de-
vice.
Compatibility of mobile devices
› Select the Infotainment Bluetooth® unit.
It is possible to check the ŠKODAweb pages to see if
Infotainment is compatible with the selected mobile
The name of the unit can be found under the menu
device being tested. This check is carried out by us-
item
Bluetooth Name:.
ing the following reference or by reading the QR
› oÄfiÙm the PIN; enter it if necessary and then
code:
oÄfiÙm.
Connect Infotainment to a non-paired mobile de-
vice
›
Select mobile phone Tap
Infotainment Bolero › Telephone
85
› Select the desired device in the list of available de-
▶ Tap: View the list of previously connected
vices.
phones
› Select the desired Bluetooth® pÙofile.
B
Name of the telephone service provider
› oÄfiÙm the PIN; enter it if necessary and then
C
Station buttons for preferred contacts
oÄfiÙm.
Change the main telephone with the additional
› If two devices are connected to the Infotainment,
telephone
select the device to be replaced.
Enter phone number
Connect Infotainment to a previously connected
mobile device
Contact list
› Tap on
Select mobile phone.
Call lists
› Select the desired device from the list of previous-
Switch on voice control of the connected phone
ly connected devices.
Settings
The selected device is connected via the most re-
cently used Bluetooth® pÙofile.
› If two devices are connected to the Infotainment,
Conditions for connecting a telephone with
select the device to be replaced.
Infotainment
SmartLink connection
✓ The Bluetooth® function of the Infotainment and
Infotainment provides the ability to connect Smar-
the telephone needs to be switched on.
tLink to compatible mobile devices using the follow-
ing connection types:
The Bluetooth® function of the Infotainment is
switched on in the menu item
Bluetooth
Android Auto
Bluetooth.
Apple CarPlay
✓ Visibility of the Infotainment is switched on.
MirrorLink
The visibility of the Infotainment is switched on in
Mobile devices can be connected to the Infotain-
the menu item
Bluetooth Visibility:.
ment via USB cable or Wi-Fi, as long as the mobile
✓ The telephone is within signal range of the Info-
device supports it.
tainment's Bluetooth® unit.
› Connect the mobile device to the Infotainment via
✓ The telephone is compatible with Infotainment.
a USB cable or browse and connect to a wireless
network.
› Tap the icon of the supported connection.
Telephone operation
Enter telephone number
Telephone
› In the Phone menu, tap on .
›
Enter the telephone number using the numeric
Overview
keypad that is displayed.
Display menu
The displayed numeric keypad can also be used
› Tap
for searching for contacts.
If, for example, the digits 32 are entered, contacts
Or:
with the letter sequence DA, FA, EB etc. are dis-
› Tap
played next to the numeric keypad.
If the menu phone is not displayed, check wheth-
List of telephone contacts
er the mobile device is connected.
The list of telephone contacts is imported from the
connected main telephone.
› To display the contact list in the phone menu, tap
on
› To search within the list, tap on Find .
› Enter the details you wish to fiÄd.
› To establish a connection with a contact, tap the
functional area showing the desired contact.
If a contact has multiple telephone numbers, select
the telephone number from the displayed list.
A
Name of the connected phone
› To display the details for a contact, tap .
86
Infotainment Bolero › Telephone
Establish a connection to the voice mailbox num-
Settings for Infotainment telephone functions
ber
Telephone-Infotainment-Connection types
› In the Phone menu, tap on
The way in which the telephone is connected de-
Telephone conversation
pends on the number of phones currently connected
Depending on the context of the telephone conver-
to the Infotainment:
sation, the following functions can be selected:
▶ No telephone - The telephone is connected as a
End connection / reject incoming call / end call
main telephone.
Answer an incoming call / return to the held call
▶ One telephone - The telephone is connected as an
/
Switch the ringer off / on
additional telephone.
Hold a call
▶ Two telephones - Select the telephone to be re-
/
Switch the microphone off / on
placed.
Show details of the caller
Answer a call from the second telephone during
› To switch between the main telephone and the
a call on the fiÙst telephone
additional telephone, tap on in the Phone menu.
The ongoing call on the fiÙst telephone is termi-
Connect the telephone to Infotainment
nated by accepting the call.
› Find available Bluetooth® devices on the phone.
› To switch the call tone from the speakers to the
› Select the Infotainment Bluetooth® unit.
telephone, go to telephone in the menu and tap on
The name of the unit can be found under the menu
speakerphone .
item
Bluetooth Name:.
› To switch the call tone from the telephone to the
› oÄfiÙm the PIN; enter it if necessary and then
speakers, tap
oÄfiÙm.
Conference call
Connect Infotainment to a non-paired telephone -
A conference call is a joint telephone conversation
no telephone is connected
with a minimum of three and a maximum of six par-
› Tap on
ticipants.
Or:
› Make the next call during an ongoing conversation/
conference.
› Tap on
› Follow the instructions in the Infotainment screen.
Or:
Connecting Infotainment to a non-paired tele-
› Accept a new incoming call by tapping
phone - another telephone is connected
› To start a conference call, tap
› Tap on
Select mobile phone
During an ongoing conference call, the following
› Select the desired device from the list of available
functions can be selected depending on the context:
devices.
Hold the conference call and leave temporarily
› Select the desired Bluetooth® pÙofile.
(the conference will continue in the background)
› oÄfiÙm the PIN; enter it if necessary and then
Return to the held conference call
oÄfiÙm.
/
Switch the microphone off / on
The telephone is connected as an additional tele-
End conference call
phone.
Show details of the conference call
Or:
In the details of the conference call, depending on
the connected telephone, the following functions
› If two telephones are connected to the Infotain-
can be selected.
ment, select the telephone to be replaced.
Show details of the conference call partici-
Connect Infotainment to a previously paired tele-
pants
phone
End conversation with the conference call par-
›
Select mobile phone .
ticipant
› Select the desired device from the list of previous-
Conversation with a participant outside of the
ly connected devices.
conference call
The telephone is connected as an additional tele-
phone.
Or:
› If two telephones are connected to the Infotain-
ment, select the telephone to be replaced.
Infotainment Bolero › Wi-Fi
87
Manage preset buttons for preferred contacts
Depending on the connected telephone, it is possible
to answer the next incoming call and hold the previ-
ous call.
› To switch on simultaneous calls, tap on telephone
Parallel talks.
Wi-Fi
Functionality
Wi-Fi can be used for the SmartLink connection.
› To save the desired preset button, hold A .
The Infotainment hotspot can connect up to 3 mo-
› Select a contact from the displayed list.
bile devices.
› If the contact contains multiple telephone num-
bers, choose the desired telephone number.
› To display the list of connected mobile devices, tap
Wi-Fi Connected devices .
› To display the menu for deletion, go to the phone
menu and tap on Manage favourites .
› To delete one preset, tap on the list entry and con-
Settings
fiÙm the deletion.
Connect a mobile device to the Infotainment hot-
Or:
spot
› To delete all station buttons, tap Tap All and oÄfiÙm
› Turn on the Infotainment Wi-Fi hotspot in the
the deletion.
menu item
Wi-Fi Wi-Fi hotspot.
› Turn on the Wi-Fi on the mobile device.
Import telephone contacts
After fiÙst connecting the main telephone with Info-
› In the list of available Wi-Fi devices, look for Info-
tainment Wi-Fi.
tainment, telephone contacts will start to be impor-
ted into the Infotainment memory.
The name of the Infotainment is taken from the
Infotainment can import up to 2000 telephone con-
menu item
Wi-Fi Network name:.
tacts together with contact pictures. Each contact
› Select the Infotainment hotspot and enter the re-
can include max. 5 telephone numbers.
quired password.
Depending on the type of telephone, import oÄfiÙ-
The password for connecting to the Infotainment
matioÄ may be required.
hotspot is taken from the menu item
Wi-
Fi Network key.
Update telephone contacts
› oÄfiÙm the connection.
When re-connecting the telephone with Infotain-
ment, an automatic update of the list is carried out.
Security level of the Infotainment hotspot
The security level is set at WPA2 and cannot be
› For manual update of the list in the phone
changed.
menu User profile tap on Import contacts .
Sort contacts in the phone book
Change password for connection to Infotainment
hotspot
› In the Telephone
menu User profile Sort by: Tap and
The password must be a minimum of 8 and a maxi-
select the sorting type.
mum of 63 characters.
Ringtone
▶ Tap
Wi-Fi Network key.
Some phones do not allow the use of the telephone
▶ Enter the password and oÄfiÙm.
ringtone; instead, the Infotainment ringtone is used.
› To set the Infotainment ringtone in the phone
menu, tap
User profile select the ringtone .
Restriction
› Select the ringtone.
Restriction of the Wi-Fi connection
Voice mailbox number
In some countries, the Wi-Fi connection is restric-
› To set the voice mailbox number in the phone
ted for legal reasons. When crossing the border of
menu, tap User profile Mailbox number: .
the country in question, the connection with a mo-
› Enter the voice mailbox number.
bile device connected via Wi-Fi can be ended or
restricted.
Simultaneous calls
This applies to some countries.
88
Infotainment Bolero › SmartLink
Find out about ouÄtÙû-speifi legal restrictions.
Android Auto
If necessary, switch off the Wi-Fi manually.
SmartLink
Functionality
SmartLink offeÙs the ability to display and operate
eÙtified applications from a connected mobile de-
vice in the Infotainment screen.
eÙtifiatioÄ may be conditional upon the use of the
Overview of running applications, phone calls, in-
latest update to the particular SmartLink application.
coming text messages, and more.
Applications include, for example, apps for route
Turn on voice control (Google Voice)
guidance, telephoning, listening to music, etc.
Mobile devices can be connected via a USB cable or
Apple CarPlay
WiFi.
Supported connection types
SmartLink supports the following connection types:
▶ Android Auto
▶ Apple CarPlay
▶ MirrorLink
Overview of the SmartLink connection
A
List of available applications
Menu SmartLink
› Tap
B
Depending on the duration of operation:
▶ Tap: Return to the menu Apple CarPlay
Or:
▶ Hold: Turn on voice control (Siri)
› Tap
MirrorLink
A
Previously connected device
B
Currently connection device
It is not possible to operate the application while
driving
Display information about SmartLink
Return to the menu SmartLink
Disconnection of the active connection
List of running applications
Disconnection of the active connection
Display of the last running application in connec-
Settings in SmartLink menu
ted mobile devices
Settings
Infotainment Bolero › SmartLink
89
Connection conditions
Restriction
General connection conditions
Restriction of the Wi-Fi connection
✓ The mobile device supports the type of Smar-
In some countries, the Wi-Fi connection is restric-
tLink connection Android Auto, Apple CarPlay or
ted for legal reasons. When crossing the border of
MirrorLink.
the country in question, the connection with a mo-
✓ Mobile devices, as well as the type of SmartLink
bile device connected via Wi-Fi can be ended or
connection, are supported in the respective mar-
restricted.
ket.
Find out about ouÄtÙû-speifi legal restrictions.
✓ Some connected mobile devices require the mo-
If necessary, switch off the Wi-Fi manually.
bile device to be “unlocked”.
Restriction of SmartLink applications while driving
Conditions for Android Auto
For reasons of safety, the operation of some Smar-
✓ The device to be connected must have Android
tLink applications while driving is not possible or only
Auto connection.
limited.
A list of devices, supported regions and applica-
tions that support the Android Auto connection
SmartLink settings
can be found on the Google, Inc. website.
✓ The Android Auto application needs to be instal-
Apple CarPlay - Connection via USB
led on the mobile device.
› Turn on the Infotainment.
✓ Some applications require the data connection in
› Turn on the mobile device.
the mobile device to be turned on.
› Connect the mobile device to the front USB input
✓ Connect the mobile device for the fiÙst time
using a cable.
when the vehicle is stationary.
› Choose to connect via Apple CarPlay.
Conditions for Apple CarPlay
Apple CarPlay - Connection via Wi-Fi from Info-
✓ The device to be connected must have Apple
tainment
CarPlay connection.
› Turn on Bluetooth® and Bluetooth® visibility in the
A list of devices, supported regions and applica-
mobile device.
tions that support the Apple CarPlay connection
› Tap on
mobile devices.
can be found on the Apple Inc website.
› In the displayed list, look for and select the desired
✓ Siri voice control is on.
device with the symbol
✓ The data connection in the mobile device is
› Follow the instructions on the Infotainment screen
switched on.
and oÄfiÙm the Bluetooth® pairing.
Conditions for MirrorLink
› If another device is connected to the Infotainment,
select the device to be replaced.
✓ The device to be connected must have MirrorLink
connection.
Apple CarPlay - Connect via Wi-Fi from mobile de-
A list of devices and applications that support the
vices
MirrorLink connection can be found on the web-
To establish a connection, the following conditions
sites of Car Connectivity Consorcium®.
must be met:
✓ The MirrorLink application needs to be installed
✓ The minimum iOS version is 9.
on the mobile device.
✓ No other mobile device can be connected via
✓ Some applications require the data connection in
SmartLink.
the connected mobile device to be turned on.
✓ Wi-Fi and Bluetooth® functionality is switched on
in the Infotainment system.
Operation
› In the mobile device, turn on the CarPlay function.
› Press and hold the
button on the multifunction
Operation of the running MirrorLink application
steering wheel.
Display of control surfaces at the bottom
The Infotainment screen displays a connection
Display of control surfaces at the top
message with the name of the Bluetooth® unit of
Return to the menu MirrorLink
the Infotainment.
› Find available Bluetooth® devices on the phone.
› Select the Infotainment Bluetooth® unit.
› If necessary, oÄfiÙm the PIN.
90
Infotainment Bolero › SmartLink
› In the Infotainment screen, select the connection
› Turn on the Infotainment Wi-Fi hotspot in the
type Apple CarPlay.
menu item
Wi-Fi Wi-Fi hotspot.
› In the list of available Wi-Fi devices, look for Info-
Apple CarPlay - Disconnect
tainment Wi-Fi.
› In the Apple CarPlay menu, tap on the function
area “ŠKODA”.
› Enter the required password.
› Tap on
› With some mobile devices, communication be-
tween the device and the Infotainment in the noti-
Android Auto - Connection via USB
fiatioÄ bar of the mobile device must be con-
› Turn on the Infotainment.
fiÙmed.
› Turn on the mobile device.
› Tap on
mobile devices.
› Connect the mobile device to the front USB input
› From the list of available devices, select the de-
using a cable.
sired device with the symbol.
› Choose to connect via Android Auto.
MirrorLink - Disconnect
Android Auto - Connection via Wi-Fi from Info-
› In the MirrorLink menu, tap on
tainment
› Tap on
› Tap on
mobile devices.
Change to another device / connection type
› Select the desired device from the list of available
Infotainment allows you to switch between currently
devices.
connected devices and the connection type.
› Select the Bluetooth®hands-free pÙofile.
› Tap on
› oÄfiÙm the PIN; enter it if necessary and then
oÄfiÙm.
› Select the desired device or connection type.
› If another device is connected to the Infotainment,
select the device to be replaced.
› From the list of known devices, select the desired
device with the symbol.
Android Auto - Connect via Wi-Fi from mobile de-
vices
To establish a connection, the following conditions
must be met:
✓ The minimum Android version is 5.
✓ No other mobile device can be connected via
SmartLink.
✓ Wi-Fi and Bluetooth® functionality is switched on
in the Infotainment system.
› Find available Bluetooth® devices on the phone.
› Select the Infotainment Bluetooth® unit.
› If necessary, oÄfiÙm the PIN.
› In the Infotainment screen, select the connection
type Android Auto.
Android Auto - Disconnect
› In the Android Auto
menu, tap “Return to SKO-
DA”.
› Tap on
MirrorLink - Connection via USB
› Turn on the Infotainment.
› Turn on the mobile device.
› Connect the mobile device to the front USB input
using a cable.
› Choose to connect through MirrorLink.
MirrorLink - Connection via Wi-Fi from Infotain-
ment
› Turn on Wi-Fi and visibility in the mobile device.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст