Skoda Enyaq (2021 year). Manual in english — page 4
Lighting, windscreen wipers and washers › Exterior lighting
73
Troubleshooting
Lighting, windscreen wipers and washers
Key switch for airbag deactivation is faulty
Exterior lighting
flashes together with
The front passenger airbag will not be deployed in the
Functionality
event of an accident!
Unless otherwise stated, the light works when the ignition is
› Have the airbag system checked by a specialist garage imme-
switched on.
diately.
Daylight running lights
The daytime running lights illuminate the area in front of the ve-
hicle.
In vehicles for certain markets, this also provides lighting for
the rear area of the vehicle.
Operating conditions
✓ The light switch is located in mode
Automatically switch lights on/off
The light is automatically switched on or o according to the
given lighting conditions and vehicle operation (standstill/travel).
Some of the following lighting functions turn on/o automati-
cally:
▶ Dipped beam and parking lights
▶ Daylight running lights
Operating conditions
✓ The light switch is located in mode
The automatic dipping and parking light switching is indicated
by the illumination of the symbol
in the light switch.
Full LED Headlights
When the light switch is in mode
, the headlights provide
the best possible beam of light in front of the vehicle. The Dy-
74
Lighting, windscreen wipers and washers › Exterior lighting
namic cornering light function ensures the best possible illumi-
Turning on the dipped beam.
nation of the curve area.
In the light switch, is illuminated
When no light is switched on
▶
- Sidelights
The control light may also light up in the instrument cluster,
Switching on the sidelights.
indicating that it is necessary to switch on the light.
In the light switch, is illuminated
illuminates
▶
- Light turned off
› Switch on the light.
Turn o the light.
There is no green warning light in the light switch.
Operation
After switching on the ignition, the
mode is automatical-
ly set.
Light modes
Switching on the parking light and switching o the light is
The light mode can be selected us-
only possible when the vehicle is stationary or driving at a speed
ing the switch
of max. 10 km/h up to a distance of max. 100 m. When one of
› Press the switch repeatedly and
the values is exceeded, automatic driving light switching takes
select the desired mode.
place.
The information of selected mode is
High beam and headlight flasher
briefly displayed in the instrument
The high beam works when the low beam is on.
cluster display.
A
Switch on high beam
The menu with available light modes
B
Switch o main beam / switch
varies depending on the given light-
ing conditions and the vehicle opera-
on headlight flasher
tion (standstill/drive).
When the main beam or headlight
▶
- Automatic mode
flasher is switched on, the indicator
lamp lights up in the instrument
Automatic switching on/o of dipped, parking or daytime run-
cluster
ning lights.
CAUTION
In the light switch, is illuminated
. Even if the dipped beam
Risk of an accident!
is automatically turned on, the switch also lights up
▶
Do not dazzle other road users with the high beam.
▶
- Dipped beam
Lighting, windscreen wipers and washers › Exterior lighting
75
Turn signal
› Turn on the bad weather light
switch.
A
Switching on the turn signal
light on the right - the warning
The warning light in the instru-
light flashes in the instrument
ment cluster illuminates and in-
cluster
formation about the selected light
B
Switching on the turn signal
mode is briefly displayed.
light on the left - the warning
light flashes in the instrument
cluster
Rear fog light
Turn signal - convenience signalling
› Switch on the switch for rear fog
Convenience signalling enables three flashes of the turn signal
light.
lights without having to move the lever up or down.
The warning light in the instru-
› Tap the control lever up or down.
ment cluster illuminates and in-
formation about the selected light
The corresponding turn signal lights flash three times.
mode is briefly displayed.
Tap the lever in the opposite direction ahead of time to stop
signalling.
Bad weather light
The bad weather light provides better illumination of the road in
unfavorable visibility conditions where the standard light loses
The rear fog light does not illuminate when an accessory is
its e ectiveness.
connected to the trailer socket.
Hazard warning light system
› Press the button to switch on or o in the middle part of the
control panel.
The hazard warning lights can be switched on automatically dur-
ing hard braking. The hazard warning lights are then switched o
again automatically when starting o or accelerating.
76
Lighting, windscreen wipers and washers › Exterior lighting
When the hazard warning system is on and the turn signal is
is opened. After a few seconds or after the driver's door is
switched on, the hazard warning lights will be switched o tem-
closed, the warning signal will stop.
porarily and only the turn signal will flash on the relevant side of
The light may switch o automatically if the 12-volt vehicle bat-
the vehicle.
tery is too low. If the parking lights on both sides are switched
One-sided parking light
on with the ignition o , the lights will not be switched o auto-
The one-sided parking light allows one side of the parked vehicle
matically and the 12 volt vehicle battery may be discharged.
to be illuminated through activation of the corresponding side-
lights.
Settings
A
Switch on the sidelights on the
right
Activating/deactivating the automatic headlights system in
B
Switch on the sidelights on the
rain
left
› In the Infotainment system, select the menu
Out-
side .
› Switch o the ignition.
› By moving your finger sideways, choose the screen with the
› Move the lever to the appropriate
menu item Headlights .
position.
› Select Headlights and activate or deactivate the function of the
› Lock the vehicle.
automatic driving light switch function when it rains.
When the parking light is switched
Activating/deactivating convenience signalling
on, an acoustic warning signal
› In the Infotainment system, select the menu
Out-
sounds and the driver's door is opened. After a few seconds or
side .
after the driver's door is closed, the warning signal will stop.
›
By moving your finger sideways, choose the screen with the
Double-sided parking light
menu item Headlights .
The two-sided parking light allows the parked vehicle to be illu-
› Select Headlights and actiavte or deactivate the function Comfort
minated through activation of the sidelights.
flasher .
› Turn on the ignition.
Headlamp levelling, LED headlights
› Choose
light mode.
› In the Infotainment system, select the menu
Out-
› Switch o the ignition.
side .
› Lock the vehicle.
› By moving your finger sideways, choose the screen with the
menu item Headlights .
When the parking light is switched on, an acoustic warning sig-
nal sounds after the ignition is switched o and the driver's door
› Select Headlights .
Lighting, windscreen wipers and washers › Exterior lighting
77
› Select the menu item for headlight range control.
› By moving your finger sideways, choose the screen with the
› Adjust the headlight range using the slider. The headlight
menu item Headlights .
range must correspond to the vehicle's load.
› Select Headlights and actiavte or deactivate the function Travel
mode: .
Front seats occupied, boot empty
All seats occupied, boot empty
All seats occupied, boot loaded
Troubleshooting
Driver's seat occupied, boot loaded
In the event of another vehicle loading condition, the positions ,
Turn signal light defective
,
can be used.
flashes faster - turn signal light on the right defective
For the Full LED headlights, the headlight range control is ad-
› Check the turn signal light on the right.
justed automatically.
flashes faster - turn signal light on the left defective
WARNING
› Check the turn signal light on the left.
Risk of an accident!
An incorrectly adjusted headlight range can cause insucient
does not flash when the trailer is hitched - trailer turn sig-
vehicle lighting or can dazzle other road users.
nal light defective
▶ Adjust the headlight range correctly.
› Check the trailer lighting.
Activate / deactivate the dynamic cornering lights function
Applies to full LED headlights.
Light bulb or LED bulb is defective
illuminates together with
› In the Infotainment system, select the menu
Out-
Information appears in the display regarding the defective
side .
lights.
› By moving your finger sideways, choose the screen with the
› Replace the defective bulb.
menu item Headlights .
› In case of a defective LED bulb, contact a specialist garage for
› Select Headlights and actiavte or deactivate the function Dynamic cor-
help.
nering light .
Adjust headlights for driving in right / left-hand traffic
The headlights are misted up on the inside
Applies to full LED headlights.
Inside the headlights, moisture may occur. This is not a defect.
› In the Infotainment system, select the menu
Out-
Malfunction of the automatic headlight circuit
side .
› Clean the windscreen in the area of the rain/light sensor.
78
Lighting, windscreen wipers and washers › COMING HOME, LEAVING HOME exterior lighting
Beam of light in front of the vehicle has shortened
Settings
Headlight defective.
› In the Infotainment system, select the menu
Out-
› Seek the help of a specialist garage.
side .
Driving lights defective
› By moving your finger sideways, choose the screen with the
If a message regarding the failed driving lights is displayed, the
menu item Comfort light .
light will work in emergency mode.
› Select Comfort light select and set the speed limit.
› Drive on, exercising appropriate caution.
After switching o the ignition, a menu is displayed on the In-
› Seek the help of a specialist garage.
fotainment screen, showing where the COMING HOME func-
tion can be activated/deactivated.
COMING HOME, LEAVING HOME exterior lighting
Light Assist high-beam assist system
Functionality
Functionality
The COMING HOME function turns on the light after turning o
the ignition. The light switches o automatically after the set
The high beam assist system automatically switches the high
lighting time has elapsed.
beam on and o .
The LEAVING HOME function switches on the light when un-
WARNING
locking the vehicle with the wireless remote control.
Risk of accident!
For vehicles with Full LED headlights and keyless locking sys-
▶ If necessary, manually switch the high beam on or o .
tem (KESSY) with activated automatic unlocking function, the
lights are switched on automatically when the key is approach-
ed.
Operating conditions
✓ The system is activated.
Operating conditions
✓ The light switch is located in mode
✓ The driving speed is higher than 30 km/h.
✓ Visibility has worsened.
✓ The low beam is switched on.
✓ The light switch is located in mode
Lighting, windscreen wipers and washers › Dynamic Light Assist headlight assist system
79
Operation
› By moving your finger sideways, choose the screen with the
menu item Headlights .
Switching on
› Select Headlights and actiavte or deactivate the function Light Assist .
› Push the lever in the direction of
the arrow.
Dynamic Light Assist headlight assist system
It lights up in the instrument clus-
ter
from the isolation box.
Functionality
When the assist system switches
The headlight assist system automatically switches the high
the main beam on automatically, it
beam on and o .
lights up in the instrument cluster
from the isolation box.
When the high beam is switched on, it adjusts the light cone so
that the drivers of oncoming and preceding vehicles are not daz-
Switching off
zled.
› Manually switch the high beam on or o .
WARNING
Risk of accident!
Function restriction
▶ If necessary, manually switch the high beam on or o .
The system may dazzle other road users if their headlights/lights
are not detected for the following reasons, for example:
Operating conditions
▶ The headlights/lights of oncoming vehicles are covered by
crash barriers, for example.
✓ The system is activated.
✓ The light switch is located in mode
▶ The headlamps/lights of the oncoming or preceding vehicle
are dirty or not functioning.
✓ The driving speed is higher than 30 km/h (for some coun-
tries, higher than 60 km/h).
✓ The low beam is switched on.
Settings
Activation/deactivation
› In the Infotainment system, select the menu
Out-
side .
80
Lighting, windscreen wipers and washers › Replace light bulbs
Operation
› By moving your finger sideways, choose the screen with the
menu item Headlights .
Switching on
› Select Headlights and actiavte or deactivate the function Dynamic
› Push the lever in the direction of
Light Assist .
the arrow.
It lights up in the instrument clus-
Replace light bulbs
ter
from the isolation box.
When the assist system switches
What you should be mindful of
the main beam on automatically, it
DIY replacement of the following bulbs is possible. Have the re-
lights up in the instrument cluster
maining light sources replaced by a specialist garage.
from the isolation box.
The new bulb must conform to the specification of the original
Switching off
light bulb. The name of the bulb is marked on the bulb socket.
› Manually switch the high beam on or o .
NOTICE
Danger of headlight damage due to the ingress of water and dirt!
Function restriction
▶ Always fit the protective cap on the headlight correctly after
changing a bulb.
The system may dazzle other road users if their headlights/lights
are not detected for the following reasons, for example:
▶ The headlights/lights of oncoming vehicles are covered by
Conditions for changing a bulb
crash barriers, for example.
✓ Ignition o
▶ The headlamps/lights of the oncoming or preceding vehicle
are dirty or not functioning. The system can also recognize a
✓ Light switched o
vehicle as a single-lane means of transport.
Settings
Activation/deactivation
› In the Infotainment system, select the menu
Out-
side .
Lighting, windscreen wipers and washers › Interior lighting
81
Front turn signal
› Change the bulb in the socket.
› Insert the socket with the bulb in-
› Remove the protective cap
to the headlight until the locking
from the headlight.
lugs engage.
› Fit the protective cap on the head-
light again.
Left headlight (top view)
Interior lighting
› Press the locking lugs and remove
Operation
the base with the bulb.
Switching on automatically
The lighting switches on when one of the following events oc-
curs.
▶ The vehicle is unlocked
▶ One of the doors is opened
▶ The ignition is switched o
Automatic switch off
The lighting switches o when one of the following events oc-
curs:
▶ The vehicle is locked
▶ The ignition is switched on
▶ About 45 seconds after all the doors have been closed
Operation of the lighting
Turn the front and rear lights on/o
82
Lighting, windscreen wipers and washers › Interior ambient light
Deactivation of automatic activation
Or:
(
lights up yellow when deactivated)
› The menu
Interior .
The individual lights can be switched on/o by touching the cor-
› By moving your finger sideways, choose the screen with the
responding light.
interior lighting menu item.
The brightness level of the lighting can be adjusted by holding a
› Select the menu item for the interior lighting and adjust the
brightness level using the slider.
finger on the light. The set brightness level is not saved once the
lighting is switched o .
Footwell lighting
If a door remains open and the ignition is switched o , the
Applies to vehicles that do not have the background lighting.
lights will turn o automatically after 10 minutes.
› In the Infotainment system, select the menu
Interi-
or .
Automatic switching on/off of the footwell lighting
The lighting only works when the dipped or parking lights are on.
› By moving your finger sideways, choose the screen with the
interior lighting menu item.
The lighting is also switched on automatically after opening the
› Select the menu item for the interior lighting and adjust the
door (e.g. when getting in or out).
brightness level using the slider.
Turn on the lighting for the make-up mirror in the sun visors
In vehicles with background lighting, the footwell lighting is
on the windscreen
part of the interior background lighting » page 83, Settings.
› Slide o the cover of the make-up mirror.
Interior ambient light
Settings
Usage
Switch and instrument lighting
Adjusting the brightness of the switch and instrument lighting is
The ambient lighting ensures a comfortable atmosphere in the
done in Infotainment in one of the following ways:
vehicle interior.
› Press the bar at the top of the
The lighting only works when the dipped or parking lights are on.
screen and drag down.
The lighting is also switched on automatically after opening the
A window showing the slider for
door.
setting the brightness level opens.
When the vehicle is locked, the lighting briefly turns red. When
› Adjust the brightness level using
the vehicle is unlocked, the lighting briefly turns green. When
the slider.
Lighting, windscreen wipers and washers › Interior ambient light
83
one of the doors is opened, the respective door light is illumina-
C
Automatic selection option
ted in red to indicate that the door is open.
▶ The colour and the brightness will change automatically
depending on the selected driving mode.
Settings
D
Turn o the lights
E
Settings for the general brightness level
The ambient lighting is set in the Infotainment system, in the fol-
lowing menu
F
Setting the colours and the brightness level for the pre-se-
lection option
Pre-selection options for background lighting
Setting the colour for the selection options
A
Factory-set pre-selection options
▶ Only the general brightness level of the lighting is adjusta-
A
Tab for adjusting the lighting colour
ble.
B
Option for uniform illumination colour
B
User-selectable pre-selection option
▶ The colour is set using the slider E .
▶ The lighting colour can be adjusted together for the dash
C
Option for two-colour lighting
panel and door area, as well as independently for the cen-
▶ Use the slider bar E to set the colour for the dash panel
tre console. The footwell lighting is available only in white
and door area.
color.
▶ The brightness level for the lighting can be set independ-
▶ Use the slider bar F to set the colour for the centre con-
ently for the control panel, door and centre console area
sole.
as well as the footwell.
D
Option for two-colour lighting
84
Lighting, windscreen wipers and washers › Windscreen wipers and washers
▶
The colour for the dash panel and door area is replaced
Adjustment process
with the colour for the centre console.
› Choose the preset option
E
Slider for adjusting the illumination colour
› Select the tab for setting the brightness level.
F
Slider for adjusting the illumination colour
› Select the area for which the brightness level should be set.
›
Set the desired brightness level using the slider.
Adjustment process
› Choose the preset option
Windscreen wipers and washers
› Select the tab for setting the lighting colour.
› Choose whether to set a uniform lighting colour, if necessary,
Operating conditions
a di erent colour for the dash panel and door area and a di er-
ent colour for the centre console.
✓ Front flap closed
› Set the desired lighting colour using the sliders.
✓ Boot lid closed
✓ Ignition on
Setting the brightness level for the selection options
Operation
WARNING
Risk of an accident!
At low temperatures, windscreen washer fluid can freeze on the
windscreen and restrict visibility.
▶ Only use the windscreen washer when the windscreen is
warm.
A
Tab for setting the brightness level
B
Setting the brightness level for the control panel area
C
Setting the brightness level for the door area
D
Setting the brightness level for the centre console
E
Setting the brightness level for the footwell
Lighting, windscreen wipers and washers › Windscreen wipers and washers
85
Wipe and wash the windscreen
Clean headlights
When the headlights are switched on, they are cleaned the first
time and after every tenth wash of the windscreen. Setting the
spray interval can be carried out by a specialist garage.
Wipe and wash the rear window
Fast wiping
Slow wiping
Depending upon vehicle equipment:
▶ Intermittent wiping
Spring-loaded position:
▶ Automatic wiping controlled by the rain sensor
▶
Washing and wiping the windscreen
Switching o
▶ Cleaning the rear view camera
Tip-wiping (spring-loaded position)
Wiping
A
Setting the wiping speed for the position
Switching o
Washing and wiping (spring-loaded position)
Automatic rear window wiping
Depending on the vehicle equipment, the windscreen washer
If the windscreen wiping is performed without interruption, then
nozzles of the windscreen can be heated automatically.
the automatic regular intermittent wiping of the rear window
takes place.
If the driver or front passenger door is opened while the ve-
hicle is stationary with the windscreen wipers switched on, the
When the windscreen wipers are switched on, the rear window
wiping process is interrupted. If the door is closed within a few
is automatically wiped when the reverse gear is engaged.
seconds and the windscreen wiper lever is moved, the wiping
process will continue.
86
Lighting, windscreen wipers and washers › Windscreen wipers and washers
Settings
The container can hold a volume of 3 litres and 6 litres for vehi-
cles with a headlight cleaning system.
Activating/deactivating automatic wiping
The functions for automatic rear window wiping and automatic
wiping in the rain can be activated or deactivated as in the Info-
tainment system.
› The menu
Outside .
› By moving your finger sideways, choose the screen with the
menu item Mirrors and wipers .
› Select Mirrors and wipers .
› Activate or deactivate the functions.
Sealing cap of the tank - variant 1
Refilling windscreen washer fluid
WARNING
Risk of an accident!
▶ Use windscreen washer fluid that is suitable for the weather
conditions.
NOTICE
Risk of damage to the windscreen washer system!
▶ When refilling the washer fluid, do not remove the strainer
from the neck of the container.
NOTICE
Sealing cap of the tank - variant 2
Risk of damage to the headlights!
› Open the front flap » page 210.
▶ Only use washer fluid that does not attack polycarbonates.
›
Gently open the top of the sealing cap.
NOTICE
› Top up the windscreen washer fluid.
Risk of damage to parts in the area under the front flap!
› Close the sealing cap of the tank.
▶ Close the container after refilling the windscreen washer fluid.
The windscreen washer tank is located in the area under the
front flap » page 16.
Lighting, windscreen wipers and washers › Windscreen wipers and washers
87
Troubleshooting
› Within 10 seconds, press the con-
trol lever down and hold for about
Windscreen washer fluid level too low
2 seconds.
illuminates together with
› Top up the windscreen washer fluid.
Frozen windscreen wipers
› Carefully remove frozen windscreen wipers from the wind-
screen before switching on the ignition and free them from
snow and ice.
Set the windscreen wiper arms into the folding position - us-
ing the Infotainment system
Folding down windscreen wiper arms and replacing
› The menu
Outside .
windscreen wiper blades
› By moving your finger sideways, choose the screen with the
menu item Mirrors and wipers .
For folding down the windscreen wiper from the screen you
› Select Mirrors and wipers and then select the service position of the
must first adjust the wiper arms to the folded position.
windscreen wiper arms.
NOTICE
After switching o the ignition, a menu is displayed on the In-
Risk of damage to the windscreen wipers and the front flap!
fotainment screen, showing where the windscreen wiper arms
▶ Close the front flap before the windscreen wiper arms are fol-
can be set to folding position.
ded away from the windscreen.
Replace the windscreen wiper blade
▶ Do not turn on the ignition when the windscreen wiper arms
are folded away.
CAUTION
Risk of accident!
Set the windscreen wiper arms into the folding position - us-
▶ Change the windscreen wiper blades once or twice a year.
ing the operating lever
› Switch the ignition on and o again.
› Fold the windscreen wiper arm away from the windscreen.
88
Heating and air conditioning system › Climatronic automatic air conditioning system
› Press the catch and remove the
Heating and air conditioning system
wiper blade.
› Insert the new wiper blade until it
Climatronic automatic air conditioning system
clicks into place.
What you should be mindful of
› Fold the windscreen wiper arm
back onto the windscreen.
▶ We recommend keeping the internal temperature at most 5
› Turn on the ignition and push the
°C lower than the external temperature.
control lever down.
▶ We recommend switching the cooling system o about 10 mi-
nutes before the end of the journey to prevent odour forma-
tion.
▶ Annual disinfection of the air conditioning is recommended.
Cap for refilling the windscreen washer fluid
WARNING
Danger of misting!
▶ Always keep the fan on.
WARNING
Risk of accident!
In recirculation mode, there is no fresh air supply from the out-
side. This can result in loss of driver attention and fogging up of
windows.
▶ Keep the recirculation mode switched on for a short time only.
Functionality
Smart and classic air conditioning
Smart air conditioning is an automatic mode with preset selec-
tion options.
The classic air conditioning system enables the individual func-
tions to be set.
Heating and air conditioning system › Climatronic automatic air conditioning system
89
Automatic mode
Operating conditions for the cooling system
Automatic mode keeps the temperature constant and prevents
✓ Outside temperature above 2 ° C
the windows from misting.
✓ Ignition on
Cooling system
✓ Fan switched on
When the cooling system is switched on, the temperature and
humidity in the vehicle will drop.
Switching on the cooling system prevents the windows from
Operation
misting up.
Menu for operating the air conditioning
Recirculated air mode
› Press under Infotainment.
The recirculation mode prevents contaminated outside air get-
The following menu is displayed:
ting into the interior of the vehicle.
Display smart air conditioning with pre-determined pre-
Air Care
set options
The Air Care function reduces the penetration of pollutants into
Show classic settings for the air conditioning
the vehicle interior. At the same time, the air is both circulated
Air Care
and cleaned.
Further settings for air conditioning
For proper operation, the doors and windows must be closed.
After it is switched on, the air conditioning is started accord-
The function is started/switched o by tapping on the function
ing to the settings, before it is switched o .
surface
Air Care in the operating menu of the air conditioning
system.
When the Air Care function surface turns green, this indicates
Settings
that the function has been switched on. Air Care is displayed in the
status bar.
Set smart air conditioning
› Press under the Infotainment and tap
in the Infotain-
When the Air Care function surface turns white, this indicates
ment screen.
that the function has been switched on. Air Care is displayed in the
status bar.
Depending on the equipment, a menu with a number of the fol-
lowing functions is displayed:
After the function is switched o , the function surface Air Care
lights up green for a certain time.
Switch air conditioning on or o
Front
Show the front settings
Rear
Show the rear settings
90
Heating and air conditioning system › Climatronic automatic air conditioning system
Preselect option for ventilation/defrosting of wind-
Set classic air conditioning
screen
› Press under the Infotainment and tap
in the Infotain-
Preselect option for the flow of warm air into the foot-
ment screen.
well
The following menu is displayed:
Preselect option for the flow of warm air in the hand
area and switching on the steering wheel heating
Preselect option for the flow of cold air into the foot-
well
Preselect option for the flow of external air into the in-
terior
Preselect option for a short-term increase in heating
output
Preselect option for a short-term increase in cooling
output
Switch maintenance of the interior temperature on/o
according to the temperature setting for the driver's
A
Show the front settings
side
B
Set the direction of the air outlet
Switch the seat heating on/o » page 94, Operation
Decrease the temperature
C
Show the rear settings
Increase temperature
D
Overview of the currently selected functions
The selected preset option is activated for a limited period of
E
Switch on automatic mode and set the operating power
time.
F
Set the blower speed
To start the preset option, certain conditions must be met
G
Option for setting preferred Climatronic func-
due to the condition of the vehicle. These conditions can neither
tions » page 101, Operation
be influenced nor detected.
Switch Climatronic on/o
When switching o the preselect option the steering
Switching the windscreen heater on/o » page 93, Opera-
wheel heating is also switched o . This also applies to the situa-
tion
tion where the steering wheel heating was switched on manually
before starting this preselect option.
Switch maintenance of the interior temperature on/o ac-
cording to the temperature setting for the driver's side
Turn steering wheel heating on/o » page 94, Operation
Heating and air conditioning system › Climatronic automatic air conditioning system
91
Switch recirculated air mode on/o
▶ Automatic windscreen heating - Switch on/o the automatic windscreen
heating » page 93, Settings
Switch the cooling system on/o
▶ Switching on/o the automatic start of the seat and steering
Switch the seat heating on/o » page 94, Operation
wheel heating when the ignition is switched on (depending on
Lock the increase in the heating output of the rear seat
the interior temperature)
heating and set the rear temperature » page 94, Settings
Consumption-friendly operation of the Climatronic
The function is displayed after tapping the function surface
If one of the seats is not occupied, the Climatronic adjusts the
C.
air temperature accordingly to reduce energy consumption.
Eco is displayed in the infotainment screen.
Decrease the temperature
Increase temperature
The temperature can also be set using two fingers in the pro-
Troubleshooting
gress bar under the temperature setting area.
Water under the vehicle
The rear temperature can also be set on the display in the
When the cooling system is switched on, water can drip o the
centre console at the rear.
air conditioning system. This is not a leak.
With a temperature setting outside of the number range, one of
Fogging
the following icons will be displayed in the Infotainment screen:
› Switch on automatic mode.
LOW Maximum cooling power
Or:
HIGH
Maximum heating power
› Increase the blower speed, switch on the cooling system, and
The air conditioning system is also set in the ŠKODA Connect
set the air distribution to the windscreen.
application » page 151, Functionality.
Automatic switch-off of the cooling system
Further Climatronic settings
If the coolant temperature is too high, the cooling system may
› Tap the functional area in the operating menu for the air
switch o automatically. This ensures sucient engine cooling.
conditioning.
The following menu is displayed:
▶ Automatic air recirculation - Automatic air circulation mode on/o
Also included depending on vehicle equipment:
92
Heating and air conditioning system › Stand-by air conditioning
Stand-by air conditioning
Display of the stationary air conditioning with preset op-
tions and the possible temperature setting
Usage
Setting the departure time » page 92, Setting the depar-
ture time
With stand-by air-conditioning, the vehicle interior is cooled,
Einstellung der Klimatisierung der Sitze und der Scheiben-
ventilated or heated when stationary according to the desired
beheizung
temperature set for the time of departure.
Further settings for stationary air conditioning
Switching on automatically
Functionality
The stand-by air conditioning system switches on automatically
Sources for operating the stand-by air conditioning
depending on the departure time that is set and activated.
▶ Power for high-voltage battery
Automatic switch off
▶ Power for charging station or mains socket
The stand-by air conditioning switches o automatically when
one of the following events occurs:
Operating using power of high-voltage battery
In order to minimise the discharge of the high-voltage battery,
▶ Upon reaching the desired temperature and departure time
the air-conditioning time is shorter than when operating with
▶ If the charge of the high-voltage battery is too low
electricity from the charging station or the mains socket.
Use with power from the charging station or wall outlet
Setting the departure time
When charging with alternating current (AC), the high-voltage
battery is charged first, and then the air conditioning starts.
› Tap on
When charging with direct current (DC), the vehicle is air-condi-
› Select one of the pre-set options for setting the departure
tioned during the charging process. When the charging process
time.
is complete, the air conditioning process is ended or continued
In the displayed pre-selection option, you can use the functional
with power from the high-voltage battery.
surface to set or switch on following menu items:
▶ Departure time
Operation
▶ Weekday(s)
▶ Repeat for the selected weekday(s)
Menu for operating the stationary air conditioning
› Select the
menu in infotainment.
› Activate/deactivate the selected preselection option.
The following menu is displayed:
Heating and air conditioning system › Heated windscreen
93
Heated windscreen
Settings
Usage
Automatic heated windscreen
The heated windscreen switches on automatically if the wind-
Windscreen heating is used for defrosting or ventilating the
screen mists up.
windscreen.
› Press the button below the Infotainment
and tap the
Infotainment screen.
Requirements
› Select the menu item for automatic windscreen heating.
✓ Ignition on
✓ Outside temperature approximately below 35 ° C
Troubleshooting
The indicator light in the button or below the button flashes
The heating does not work as the battery charging level of the
Operation
12 volt vehicle battery is too low.
Heated rear window
› Press the button under the Infotainment.
Seat heating
Heated windscreen
› Press the button under the Infotainment.
What you should be mindful of
› Tap on function surface
Front
in the Infotainment
WARNING
screen.
Risk of burns!
Windscreen heating switches o automatically after some time.
▶ Do not switch on the seat heater for persons with limited per-
ception of pain or temperature.
If ignition is switched o when the heating is on and turned back
on again within about 10 minutes, the heating is continued.
Mode for ventilation/defrosting of windscreen
› Press the button under the Infotainment.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст