Infiniti M35/M45 Y50. Manual — part 936
INTERIOR ROOM LAMP
LT-289
C
D
E
F
G
H
I
J
L
M
A
B
LT
Map Lamp
NKS003T9
BULB REPLACEMENT
1.
Remove lens (1) using clip driver or suitable tool.
2.
Remove bulb (2).
REMOVAL AND INSTALLATION
Refer to
Personal Lamp
NKS003TA
BULB REPLACEMENT
1.
Insert a screwdriver or similar tool and remove lens (1).
2.
Remove bulb (2).
REMOVAL AND INSTALLATION
Removal
1.
Remove screw (A).
2.
Use a clip driver or similar tool and remove personal lamp (1).
3.
Disconnect connector.
Installation
Installation is the reverse order of removal.
Map lamp
: 12V - 8 W
SKIB4195E
Personal lamp
: 12V - 8W
SKIB4200E
SKIB4201E
LT-290
INTERIOR ROOM LAMP
Foot Lamp (Driver Side)
NKS003TB
BULB REPLACEMENT
1.
Insert a screwdriver or similar tool and remove lens (1).
2.
Remove bulb (2).
REMOVAL AND INSTALLATION
Removal
1.
Use a clip driver or similar tool and remove foot lamp (driver
side) (1).
2.
Disconnect connector.
Installation
Installation is the reverse order of removal.
Foot lamp (Driver side)
: 12V - 3.4W
SKIB4202E
SKIB4203E
INTERIOR ROOM LAMP
LT-291
C
D
E
F
G
H
I
J
L
M
A
B
LT
Foot Lamp (Passenger Side)
NKS003TC
BULB REPLACEMENT
1.
Insert a screwdriver or similar tool and remove lens (1).
2.
Remove bulb (2).
REMOVAL AND INSTALLATION
Removal
1.
Use a clip driver or similar tool and remove foot lamp (passenger
side) (1).
2.
Disconnect connector.
Installation
Installation is the reverse order of removal.
Vanity Mirror Lamp
NKS003TD
BULB REPLACEMENT
1.
Insert a thin screwdriver in the lens end and remove lens (1).
2.
Remove bulb (2).
Foot lamp (Passenger side)
: 12V - 3.4W
SKIB4204E
SKIB4205E
Vanity mirror lamp
: 12V - 1.8 W
SKIB4197E
LT-292
INTERIOR ROOM LAMP
Step Lamp
NKS003TE
BULB REPLACEMENT
1.
Insert a screwdriver or similar tool and remove lens (1).
2.
Remove bulb.
REMOVAL AND INSTALLATION
Remove step lamp integral with door trim. Refer to
EI-37, "Removal and Installation"
Kicking Plate Illumination
NKS003TF
BULB REPLACEMENT
Replacement integral with front kicking plate inner.
REMOVAL AND INSTALLATION
Remove integral with front kicking plate inner. Refer to
EI-37, "Removal and Installation"
.
Trunk Room Lamp (Upper/Lower)
NKS003TG
BULB REPLACEMENT
1.
Insert a screwdriver or similar tool and remove lens (1).
2.
Remove bulb (2).
REMOVAL AND INSTALLATION
Removal
1.
Insert a screwdriver or similar tool and remove trunk room lamp
(1).
2.
Disconnect connector.
Installation
Installation is the reverse order of removal.
Step lamp
: 12V - 5W
SKIB4188E
Trunk room lamp (upper/lower)
: 12V - 5W
SKIB4198E
SKIB4199E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст