Infiniti FX35 / FX45. Manual — part 980
WW-42
< SERVICE INFORMATION >
REAR WIPER AND WASHER SYSTEM
Removal and Installation of Rear Wiper Motor
INFOID:0000000001328591
REMOVAL
1.
Remove rear wiper arm. Refer to
WW-40, "Removal and Installation of Rear Wiper Arm, Adjustment of
.
2.
Remove pivot cap, and remove nut from vehicle.
3.
Remove back door finisher. Refer to
EI-47, "Component Parts Location"
4.
Disconnect rear wiper motor connector.
5.
Remove rear wiper motor mounting bolts and remove rear wiper
motor from vehicle.
CAUTION:
Never remove cushion rubber.
INSTALLATION
1.
Install rear wiper motor to the vehicle.
2.
Connect rear wiper motor connector. Turn rear wiper switch ON to operate rear wiper motor, and then turn
rear wiper switch OFF (auto stop).
3.
Install back door finisher. Refer to
EI-47, "Component Parts Location"
.
4.
Install pivot cap, and nut.
5.
Install rear wiper arm and rear wiper arm caps. Refer to
WW-40, "Removal and Installation of Rear Wiper
Arm, Adjustment of Wiper Arms Stop Location"
.
CAUTION:
Never drop the wiper motor or cause it to contact other parts.
1.
Rear wiper motor
2.
Rear wiper mounting bolts
3.
Rear wiper blade
4.
Rear wiper arm
5.
Rear wiper arm cap
6.
Rear wiper arm nut
7.
Pivot cap
8.
Nut
9.
Washer
10. Cushion rubber
SKIB7578E
PKIB3588E
Rear wiper motor mounting bolts
: 5.8 N·m (0.59 kg-m, 51 in-lb)
REAR WIPER AND WASHER SYSTEM
WW-43
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
WW
N
O
P
Washer Nozzle Adjustment
INFOID:0000000001328592
• Adjust spray positions as shown in the figure.
Unit: mm (in)
• Insert a needle or suitable tool into the nozzle hole and move it to
adjust the spray position.
Washer Tube Layout
INFOID:0000000001328593
Removal and Installation of Washer Nozzle
INFOID:0000000001328594
REMOVAL
Spray position
h (height)
(width)
φ
S
A, B
2.5 (0.098)
80 (3.15)
30 (1.18)
SKIA5088E
Adjustable range
:
±
15
°
(In any direction)
SKIA5087E
PKIC9709E
WW-44
< SERVICE INFORMATION >
REAR WIPER AND WASHER SYSTEM
1.
Remove high-mounted stop lamp. Refer to
.
2.
Remove screw and remove washer nozzle from high-mounted
stop lamp.
INSTALLATION
Installation is the reverse order of removal. Adjust nozzle spray location. Refer to
.
Check Valve
INFOID:0000000001328595
Blow check valve. Confirm that the air ventilates. Also confirm that
inhalation is impossible.
CAUTION:
A check valve is provided in the washer fluid line. Be careful not
to connect check valve to washer tube in the wrong direction.
Inspection of Front Wiper and Washer Switch Circuit
INFOID:0000000001328596
LT-104, "Combination Switch Inspection"
Removal and Installation of Rear Wiper and Washer Switch
INFOID:0000000001328597
WW-28, "Removal and Installation of Front Wiper and Washer Switch"
Removal and Installation of Washer Tank
INFOID:0000000001328598
WW-28, "Removal and Installation of Washer Tank"
Removal and Installation of Front and Rear Washer pump
INFOID:0000000001328599
WW-29, "Removal and Installation of Front and Rear Washer Pump"
PKIB6132E
SEL411H
POWER SOCKET
WW-45
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
WW
N
O
P
POWER SOCKET
Wiring Diagram - P/SCKT -
INFOID:0000000001328600
Removal and Installation of Front Power Socket - 1
INFOID:0000000001328601
REMOVAL
TKWM4490E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст