Infiniti M45 (Y34). Manual — part 125
ASSEMBLY
AT-385
D
E
F
G
H
I
J
K
L
M
A
B
AT
CAUTION:
Check that portion “A” of high and low reverse clutch drum
protrudes approximately 2 mm (0.08 in) beyond portion “B”
of rear sun gear.
39. Install needle bearing in rear carrier assembly.
CAUTION:
Apply petroleum jelly to needle bearing.
40. Install bearing race in rear carrier assembly.
CAUTION:
Apply petroleum jelly to bearing race.
41. Install rear carrier assembly in direct clutch drum.
SCIA3130E
SCIA2803E
SCIA5175E
SCIA2462E
AT-386
ASSEMBLY
42. Install needle bearing (rear side) in mid carrier assembly.
CAUTION:
Apply petroleum jelly to needle bearing.
43. Install needle bearing (front side) in mid carrier assembly.
CAUTION:
Apply petroleum jelly to needle bearing.
44. Install mid carrier assembly in rear carrier assembly.
45. Install front carrier assembly (With input clutch assembly and
rear internal gear.) to rear carrier assembly.
46. Install seal rings in input clutch assembly.
CAUTION:
●
Do not reuse seal rings.
●
Apply petroleum jelly to seal rings.
SCIA2804E
SCIA2805E
SCIA2304E
SCIA2303E
SCIA2470E
ASSEMBLY
AT-387
D
E
F
G
H
I
J
K
L
M
A
B
AT
47. Install band servo anchor end pin and lock nut in transmission
case.
CAUTION:
Do not reuse band servo anchor end pin.
48. Install brake band in transmission case.
CAUTION:
Assemble it so that identification to avoid incorrect installa-
tion faces servo side.
49. Install front sun gear in transmission case.
CAUTION:
Apply ATF to front sun gear bushing and one-way clutch
end bearing.
50. Install needle bearing in front sun gear.
CAUTION:
Apply petroleum jelly to needle bearing.
51. Adjust brake band tilting using a clip so that brake band contacts
front sun gear drum evenly.
SCIA6512E
SCIA5498E
SCIA2302E
SCIA2808E
SCIA2473E
AT-388
ASSEMBLY
52. Adjust brake band.
a.
Loosen lock nut.
b.
Tighten band servo anchor end pin to specified torque.
c.
Back of band servo anchor end pin three turns.
d.
While band servo anchor end pin, tighten lock nut to specified
torque.
Adjustment
ACS004HJ
TOTAL END PLAY
●
Measure clearance between front sun gear and needle bearing
for oil pump cover.
●
Select proper thickness of bearing race so that end play is within
specifications.
1.
Measure dimensions “K” and “L” and then calculate dimension
“J”.
a.
Measure dimension “K”.
: 5.0 N·m (0.51 kg-m, 44 in-lb)
: 46 N·m (4.7 kg-m, 34 ft-lb)
SCIA5498E
SCIA2810E
SCIA5350E
SCIA5351E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст