Infiniti G37 Coupe. Manual — part 824
TRUNK ROOM TRIM
INT-27
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
TRUNK ROOM TRIM
Exploded View
INFOID:0000000001722851
Removal and Installation
INFOID:0000000001722852
REMOVAL
1.
Fully open trunk lid assembly.
2.
Remove trunk floor carpet.
3.
Remove trunk rear plate mounting pawls and metal clips, and then remove trunk rear plate.
4.
Remove trunk floor cover mounting clips, and then remove trunk floor cover.
5.
Remove trunk weather-strip.
6.
Remove trunk rear finisher mounting clips and trunk net hook, and then remove trunk rear finisher.
7.
Remove trunk center box.
8.
Remove spare tire.
9.
Remove rear seatback welt. Refer to
10. Remove trunk front finisher mounting clips and metal clips, and then remove trunk front finisher.
1.
Trunk front finisher upper
2.
Trunk floor cover
3.
Rear wheel house finisher (LH)
4.
Trunk floor spacer LH
5.
Trunk floor felt
6.
Trunk rear finisher
7.
Trunk rear plate
8.
Rear wheel house finisher (RH)
9.
Rear seat control lever escutcheon
10. Trunk floor carpet
11. Trunk center box
12. Trunk floor spacer RH
: Clip
: Pawl
: Metal clip
JMJIA0973ZZ
INT-28
< ON-VEHICLE REPAIR >
TRUNK ROOM TRIM
11. Remove trunk side finisher mounting clip and metal clip, and then remove trunk side finisher (LH/RH).
12. Remove jack.
13. Remove trunk floor spacer mounting nuts, and then remove trunk floor spacer (LH/RH).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check that clips, pawls, metal clips are securely fitted in panel holes on body when installing, and then
press them in.
TRUNK LID TRIM
INT-29
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
TRUNK LID TRIM
Exploded View
INFOID:0000000001722854
Removal and Installation
INFOID:0000000001722855
REMOVAL
1.
Fully open trunk lid assembly.
2.
Remove trunk lid bumper rubber. Refer to
DLK-223, "TRUNK LID ASSEMBLY : Exploded View"
.
3.
Remove trunk lid pull handle (1).
1.
Trunk lid bumper rubber
2.
Trunk lid finisher inner
3.
Trunk lid assembly
4.
Emergency handle
5.
Trunk lid pull handle
: Pawl
JMJIA0974ZZ
: Pawl
JMJIA0104GB
INT-30
< ON-VEHICLE REPAIR >
TRUNK LID TRIM
4.
Remove trunk lid emergency handle holder (1).
5.
Remove trunk lid finisher mounting clips, and then remove trunk lid finisher inner.
INSTALLATION
Install in the reverse order of removal.
: Clip
JMJIA0105GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст