Infiniti G37 Coupe. Manual — part 719
FSU-26
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Wheel Height
INFOID:0000000001666573
Measure value under unladen* conditions
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
Applied model
Except for sport models
Sport models
Tire size
225/50R18
225/45R19
Front (Hf)
712 mm (28.03 in)
715 mm (28.15 in)
SFA818A
A
B
C
D
E
F
G
H
I
J
K
L
M
N
P
O
QUICK REFERENCE INDEX
A GENERAL INFORMATION
B ENGINE
C HYBRID
HBC
Hybrid Control System
HBB
Hybrid Battery System
HBR
Hybrid Brake System
D TRANSMISSION & DRIVE-
LINE
E SUSPENSION
SCS
Suspension Control System
F BRAKES
G STEERING
H RESTRAINTS
I
VENTILATION, HEATER &
AIR CONDITIONER
Heater & Air Conditioning System
Heater & Air Conditioning Control System
J BODY INTERIOR
K BODY EXTERIOR,
DOORS, ROOF & VEHICLE
SECURITY
L DRIVER CONTROLS
M ELECTRICAL & POWER
CONTROL
Power Supply, Ground & Circuit Elements
N DRIVER INFORMATION &
MULTIMEDIA
Meter, Warning Lamp & Indicator
SN
Sonar System
Audio, Visual & Navigation System
O CRUISE CONTROL
P MAINTENANCE
All rights reserved. No part
of this Service Manual may
be reproduced or stored in a
retrieval system, or transmit-
ted in any form, or by any
means, electronic, mechani-
cal, recording or otherwise,
without the prior written per-
mission of Nissan Motor
Company Ltd., Tokyo, Japan.
This manual contains maintenance and repair procedure for the 2008
INFINITI G37.
In order to assure your safety and the efficient functioning of the vehicle,
this manual should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.
All information in this manual is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi-
cations and methods at any time without notice.
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Service Manual are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service
method selected.
QUICK REFERENCE CHART G37 COUPE
QUICK REFERENCE CHART G37 COUPE
PFP:00000
ENGINE TUNE-UP DATA (VQ37VHR)
ELS0003W
Engine model
VQ37VHR
Firing order
1-2-3-4-5-6
Idle speed
A/T (In “P or N” position)
M/T (In Neutral position)
rpm
650
±
50
Ignition timing
(BTDC at idle speed)
10
°
±
5
°
CO% at idle
0.7 - 9.9 % and engine runs smoothly
Tensions of drive belts
Auto adjustment by auto tensioner
Radiater cap relief pressure
kPa (kg/cm
2
, psi)
Standard
122.3 - 151.7 (1.2 - 1.5, 18 - 22)
Limit
107 (1.1, 16)
Cooling system leakage testing pressure
kPa (kg/cm
2
, psi)
157 (1.6, 23)
Compression pressure
kPa (kg/cm
2
, psi)/rpm
Standard
1,667 - 2,354 (17 - 24, 242 - 341)
Minimum
1,226 (12.5, 178)
Differential limit between cylinders
98 (1.0, 14)
Spark plug
(Iridium-tipped type)
Make
DENSO
Standard type
FXE24HR11
Gap (Nominal) mm (in)
1.1 (0.043)
2008
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст