Infiniti G37 Coupe. Manual — part 830
INSTRUMENT PANEL ASSEMBLY
IP-21
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
• Pull up glove box assembly (1).
• Remove damper pin (2) of left side.
43. Remove instrument lower assist panel.
• Remove instrument lower assist panel mounting screws (A)
with power tool.
• Pull back instrument lower assist panel (1).
• Disconnect harness connector.
44. Remove instrument finisher B.
Pull instrument finisher B (1) upward then disengage pawls.
45. Remove instrument side panel RH.
• Remove instrument side panel mounting screw (A).
• Pull the instrument side panel RH (1) crosswise.
JMJIA0056GB
JMJIA0057GB
JMJIA0058GB
: Clip
: Pawl
JMJIA0059GB
: Clip
: Pawl
JMJIA0060GB
IP-22
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
46. Disconnect passenger air bag module connector. Refer to
SR-10, "Removal and Installation"
47. Remove passenger air bag module fixing bolt. Refer to
48. Remove instrument panel assembly.
• Remove defroster nozzle mounting clips (A).
• Remove screws (B) and bolts (C) with power tool, and then remove instrument panel assembly (1).
CAUTION:
When removing instrument panel, 2 workers are required so as to prevent it from dropping.
49. Remove the following parts after removing instrument panel assembly.
• Antenna feeder
• Center speaker grille
• Center speaker. Refer to
AV-349, "Removal and Installation"
.
• Front passenger air bag module. Refer to
SR-10, "Removal and Installation"
.
• Side ventilator grille LH/RH. Refer to
VTL-45, "SIDE VENTILATOR GRILLE : Removal and Installation"
• Inside key antenna. Refer to
DLK-239, "INSTRUMENT CENTER : Removal and Installation"
• Combination meter. Refer to
MWI-160, "Removal and Installation"
INSTALLATION
Install in the reverse order of removal.
JMJIA0061GB
CENTER CONSOLE ASSEMBLY
IP-23
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000001722822
CENTER CONSOLE (A/T MODELS)
CENTER CONSOLE (M/T MODELS)
1.
Console finisher assembly
2.
Rear upper console assembly
3.
Switch panel
4.
Switch hole mask
5.
Center console assembly
6.
Console pocket
7.
Console rear bracket
8.
Console rear finisher
9.
Console ashtray bracket
10. Console ashtray
11. Ashtray (front)
12. Cigarette lighter
13. Cup holder assembly
14. Console lid
15. Console mask
16. Auxiliary input jacks
17. Cigarette lighter case
18. Socket knob
19. Console front bracket
: Clip
: Pawl
: Metal clip
JMJIA0946ZZ
IP-24
< ON-VEHICLE REPAIR >
CENTER CONSOLE ASSEMBLY
Removal and Installation
INFOID:0000000001772103
REMOVAL
1.
Put selector lever in drive position (A/T models only).
2.
Remove selector lever knob (A/T models only). Refer to
TM-227, "Removal and Installation"
3.
Remove shift lever knob (M/T models only). Refer to
TM-18, "Removal and Installation"
.
4.
Remove console finisher.
1.
Console finisher assembly
2.
Center console assembly
3.
Coin pocket
4.
Console mask
5.
Cigarette lighter case
6.
Socket knob
7.
Console rear bracket
8.
Console rear finisher
9.
Console ashtray bracket
10. Console ashtray
11. Cup holder assembly
12. Auxiliary input jacks
13. Switch hole mask
14. Console sub harness
15. Cigarette lighter
16. Ashtray (front)
17. Parking brake lever finisher
18. Console lid
: Clip
: Pawl
: Metal clip
JMJIA0947ZZ
(A)
Console finisher (A/T models)
(B)
Console finisher (M/T models)
JMJIA0489ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст