Infiniti FX35, FX50 (S51). Manual — part 529
HOOD
DLK-239
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Unit: mm (in)
1.
Remove striker and adjust the surface height of hood, front bumper fascia and front fender according to
the fitting standard dimension, by rotating hood bumper rubber.
2.
Adjust the height difference of striker, hood bumper rubber according to the fitting standard dimension.
3.
Loosen hood hinge mounting nuts on the hood.
4.
Adjust the clearance of hood, front bumper fascia and front fender according to the fitting standard dimen-
sion, for the hood.
5.
Check that hood lock primary latch is securely engaged with striker by dropping hood from approximately
200 mm (7.874 in) height or pressing lightly on the hood.
CAUTION:
Never drop hood from a height of 300 mm (11.811 in) or more.
6.
Install as static closing face of hood is 94 – 490 N (9.6 – 50.0 kg, 21.1 – 110 lb).
NOTE:
• Exercise vertical force on right side and left side of hood lock.
• Do not simultaneously press both sides.
7.
After adjustment, tighten hood hinge mounting nuts to the specified torque.
CAUTION:
• Before installing hood hinge, apply anticorrosive agent onto the mounting surface of the vehicle
body.
• Check hood hinge rotating part for poor lubrication. If necessary, apply body grease.
• After installation, apply touch-up paint (the body color) onto the head of hood hinge mounting bolts
and nuts.
HOOD HINGE
Portion
Standard
Difference
(LH/RH, MAX)
Hood – Front bumper
fascia
A – A
D
Clearance
2.6 – 5.6
(0.102 – 0.220)
—
E
Surface height
−
2.0 – 0.5
(
−
0.079 – 0.020)
—
Hood – Front fender
B – B
F
Clearance
2.5 – 4.5
(0.098 – 0.177)
2.0
(0.079)
G
Surface height
−
.0 – 0.0
(
−
0.118 – 0.000)
—
C – C
H
Surface height
−
1.0 – 1.0
(
−
0.039 – 0.039)
—
Hood striker – Bumper
rubber
—
I
Height difference
32.3 – 33.3
(1.272 – 1.311)
—
DLK-240
< REMOVAL AND INSTALLATION >
HOOD
HOOD HINGE : Exploded View
INFOID:0000000005239720
HOOD HINGE : Removal and Installation
INFOID:0000000005239721
REMOVAL
1.
Remove hood hinge cover (LH/RH) (1).
NOTE:
While pushing the pawls, pull hood hinge cover in the direction
of the arrow.
2.
Remove hood assembly. Refer to
DLK-237, "HOOD ASSEMBLY : Removal and Installation"
3.
Remove front fender. Refer to
DLK-245, "Removal and Installation"
4.
Remove hood hinge mounting bolts, and then remove hood hinge.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
1.
Hood assembly
2.
Hood bumper rubber
3.
Seal
4.
Radiator core seal
5.
Hood insulator
6.
Inner cover
7.
Hood hinge cover
8.
Stud ball
9.
Hood stay
10.
Hood hinge
for symbols in the figure.
JMKIA2633ZZ
JMKIA2090ZZ
HOOD
DLK-241
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
• Check hood hinge rotating part for poor lubrication. If necessary, apply body grease.
• After installation, check hood open/close, lock/unlock operation.
• After installation, apply touch-up paint (the body color) onto the head of hood hinge mounting bolts
and nuts.
• After installation, perform the fitting adjustment. Refer to
DLK-238, "HOOD ASSEMBLY : Adjust-
HOOD STAY
HOOD STAY : Exploded View
INFOID:0000000005239722
HOOD STAY : Removal and Installation
INFOID:0000000005239723
REMOVAL
1.
Support hood assembly with a proper material to prevent it from falling.
WARNING:
Bodily injury may occur if no supporting rod is holding the hood open when removing the hood
stay.
1.
Hood assembly
2.
Hood bumper rubber
3.
Seal
4.
Radiator core seal
5.
Hood insulator
6.
Inner cover
7.
Hood hinge cover
8.
Stud ball
9.
Hood stay
10.
Hood hinge
for symbols in the figure.
JMKIA2633ZZ
DLK-242
< REMOVAL AND INSTALLATION >
HOOD
2.
Remove the metal clip (3) located on the connection between
the hood stay (1) and the stud ball (2) (hood side), by using a
flat-bladed screwdriver (A).
3.
Disengage the stud ball from the hood stay (hood side).
4.
Repeat the same operation to disengage the stud ball from the
hood stay (body side), then remove the hood stay.
INSTALLATION
Install in the reverse order of removal.
JMKIA2255ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст