Infiniti FX35, FX50 (S51). Manual — part 1074
EXT-46
< REMOVAL AND INSTALLATION >
DOOR OUTSIDE LOWER MOLDING
1.
With a remover tool (A) and cutter knife (B) and take off double-
faced adhesive tape, and then disengage front door outside
lower molding (1) fixing clips from rear end to front end.
CAUTION:
• Apply protective tape (C) on the door panel to protect the
painted surface from damage.
• Never use an item as a remover tool that could damage
door panel.
• Disengage the clips slowly and carefully.
• Never pull the front door outside lower molding.
2.
Remove front door outside lower molding.
REAR DOOR OUTSIDE LOWER MOLDING
1.
With a remover tool (A) and cutter knife (B), take off double-
faced adhesive tape, and then disengage rear door outside
lower molding (1) fixing clips from rear end to front end.
CAUTION:
• Apply protective tape (C) on the door panel to protect the
painted surface from damage.
• Never use an item as a remover tool that could damage
door panel.
• Disengage the clips slowly and carefully.
• Never pull the rear door outside lower molding.
2.
Remove rear door outside lower molding.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Always replace double-faced adhesive tape with a new one, if door outside lower molding is reused.
• Remove double-faced adhesive tape remaining on door panel and back of door outside lower mold-
ing with a double-faced adhesive tape remover, after removing door outside lower molding.
• When installing, visually check the door outside lower molding and the clips, then replace them with
new parts if they are damaged.
• When installing door outside lower molding, check that clips are securely fitted in door panel holes,
and then press them in.
• Never wash the vehicle within 24 hours after installing so as to keep adhesive.
: Clip
JMKIA2759ZZ
: Clip
JMKIA2760ZZ
DOOR PARTING SEAL
EXT-47
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
DOOR PARTING SEAL
Exploded View
INFOID:0000000005248885
Removal and Installation
INFOID:0000000005248886
REMOVAL
FRONT DOOR PARTING SEAL
1.
Fully open front door.
2.
With a remover tool (A), disengage the clips from the front door
parting seal (1).
CAUTION:
• Disengage the clips slowly and carefully.
• Never pull the front door parting seal strongly.
3.
Remove front door parting seal.
1.
Front door panel
2.
Front door parting seal
3.
Rear door parting seal (lower)
4.
Rear door panel
5.
Rear door parting seal (front)
6.
Double-faced adhesive tape
7.
Center mud guard
8.
Door outside lower molding
Refer to
JMKIA2761ZZ
: Clip
JMKIA2211ZZ
EXT-48
< REMOVAL AND INSTALLATION >
DOOR PARTING SEAL
REAR DOOR PARTING SEAL (LOWER)
1.
Fully open rear door.
2.
With a remover tool (A), disengage the clips from the rear door
parting seal (1).
CAUTION:
• Disengage the clips slowly and carefully.
• Never pull the rear door parting seal strongly.
3.
Remove rear door parting seal.
REAR DOOR PARTING SEAL (FRONT)
1.
Fully open front door.
2.
Pull back rear door parting seal (front).
CAUTION:
Never bend the rear door parting seal strongly.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• When installing door parting seal, check that blind clips are securely fitted in door panel holes, and
then press them in.
• When installing, visually check the door parting seal and the clips, then replace them with new parts
if they are damaged.
• Replace double-faced adhesive tape with a new one, if the rear door parting seal (front) is reused.
• Remove double-faced adhesive tape remaining on body and back of rear door parting seal (front)
with a double-faced adhesive tape remover, after removing rear door parting seal (front).
• Never wash the vehicle within 24 hours after installing so as to keep adhesive.
: Clip
JMKIA2212ZZ
BACK DOOR FINISHER
EXT-49
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
BACK DOOR FINISHER
Exploded View
INFOID:0000000005248887
Removal and Installation
INFOID:0000000005248888
REMOVAL
BACK DOOR FINISHER UPPER
1.
Fully open back door.
2.
Remove back door finisher inner. Refer to
INT-32, "Removal and Installation"
1.
Back door assembly
2.
Back door finisher upper
3.
Door handle cover
4.
Back door finisher lower
5.
Double-faced adhesive tape
: Pawl
Refer to
JMKIA2762ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст