Infiniti FX35, FX50 (S51). Manual — part 532
FRONT DOOR
DLK-251
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR HINGE : Exploded View
INFOID:0000000005239734
DOOR HINGE : Removal and Installation
INFOID:0000000005239735
REMOVAL
1.
Remove front fender. Refer to
DLK-245, "Removal and Installation"
2.
Remove front door assembly. Refer to
DLK-248, "DOOR ASSEMBLY : Removal and Installation"
.
3.
Remove front door hinge mounting bolts, and then remove front door hinge.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• Check door hinge rotating part for poor lubrication. If necessary, apply body grease.
• After installation, check door open/close, lock/unlock operation.
• After installation, perform the fitting adjustment. Refer to
DLK-249, "DOOR ASSEMBLY : Adjust-
• After installation, apply touch-up paint (the body color) onto the head of door hinge mounting bolts
and nuts.
DOOR CHECK LINK
1.
Front door panel
2.
Grommet
3.
Door striker
4.
TORX bolt
5.
Door striker cover
6.
Bumper rubber
7.
Door check link cover
8.
Door check link
9.
Door hinge (upper/lower)
Refer to
JMKIA2639ZZ
DLK-252
< REMOVAL AND INSTALLATION >
FRONT DOOR
DOOR CHECK LINK : Exploded View
INFOID:0000000005239736
DOOR CHECK LINK : Removal and Installation
INFOID:0000000005239737
REMOVAL
1.
Remove front door finisher. Refer to
INT-11, "Removal and Installation"
2.
Fully close the front door window.
3.
Remove front door speaker. Refer to
AV-139, "Removal and Installation"
(without navigation) or
(single monitor navigation) or
AV-567, "Removal and Installation"
(twin monitor
navigation).
4.
Remove door check link cover.
5.
Remove mounting bolts of door check link on the vehicle.
6.
Remove mounting bolts of door check link on door panel.
7.
Take door check link out from the hole of door panel.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
After installation, check door open/close operation.
1.
Front door panel
2.
Grommet
3.
Door striker
4.
TORX bolt
5.
Door striker cover
6.
Bumper rubber
7.
Door check link cover
8.
Door check link
9.
Door hinge (upper/lower)
Refer to
for symbols in the figure.
JMKIA2639ZZ
REAR DOOR
DLK-253
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REAR DOOR
DOOR ASSEMBLY
DOOR ASSEMBLY : Exploded View
INFOID:0000000005239738
REMOVAL
ADJUSTMENT
1.
Rear door panel
2.
Grommet
3.
Door striker
4.
TORX bolt
5.
Door striker cover
6.
Grommet
7.
Bumper rubber
8.
Door check link
9.
Door check link cover
10. Door hinge (lower)
11.
Door hinge (upper)
Refer to
JMKIA2641ZZ
DLK-254
< REMOVAL AND INSTALLATION >
REAR DOOR
DOOR ASSEMBLY : Removal and Installation
INFOID:0000000005239739
CAUTION:
• Operate with two workers, because of its heavy weight.
• Use protective tape or shop cloth to protect from damage during removal and installation.
REMOVAL
1.
Remove mounting bolts of door check link on the vehicle.
2.
Disconnect rear door harness connector.
3.
Remove door hinge mounting nuts (door side), and then remove rear door assembly.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• Check door hinge rotating part for poor lubrication. If necessary, apply body grease.
• After installation, check door open/close, lock/unlock operation.
1.
Front fender
2.
Front door
3.
Rear door
4.
Body side outer
5.
Door striker
6.
TORX bolt
7.
Front door hinge (upper/lower)
8.
Rear door hinge (upper)
9.
Rear door hinge (lower)
Refer to
for symbols in the figure.
JMKIA2640GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст