Infiniti FX35, FX50 (S51). Manual — part 976
EM-204
< UNIT DISASSEMBLY AND ASSEMBLY >
[VK50VE]
ENGINE UNIT
ENGINE UNIT
Disassembly
INFOID:0000000005245242
1.
Remove intake manifold. Refer to
2.
Remove exhaust manifold. Refer to
3.
Remove oil pan (lower). Refer to
4.
Remove ignition coil, spark plug and rocker cover. Refer to
.
5.
Remove timing chain. Refer to
6.
Remove camshaft (EXH) and VVEL ladder assembly. Refer to
.
7.
Remove cylinder head. Refer to
Assembly
INFOID:0000000005245243
Assemble in the reverse order of disassembly.
EXHAUST MANIFOLD AND THREE WAY CATALYST
EM-205
< UNIT DISASSEMBLY AND ASSEMBLY >
[VK50VE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
EXHAUST MANIFOLD AND THREE WAY CATALYST
Exploded View
INFOID:0000000005245244
Disassembly and Assembly
INFOID:0000000005245245
DISASSEMBLY
1.
Remove heated oxygen sensor 2.
CAUTION:
Heated oxygen sensor 2 is not reusable. Never remove heated oxygen sensor 2 unless this is
required.
1.
Exhaust manifold cover (bank 2)
2.
Exhaust manifold (bank 2)
3.
Gasket
4.
Exhaust manifold (bank 1)
5.
Exhaust manifold cover (bank 1)
6.
Gasket
7.
Three way catalyst (bank 1)
8.
Heated oxygen sensor 2 (bank 1)
9.
Air fuel ratio sensor 1 (bank 1)
10. Three way catalyst (bank 2)
11. Heated oxygen sensor 2 (bank 2)
12.
Air fuel ratio sensor 1 (bank 2)
13. Harness bracket
A.
To cylinder head (bank 2)
B.
To exhaust front tube
Refer to
for symbols in the figure.
JPBIA2079GB
EM-206
< UNIT DISASSEMBLY AND ASSEMBLY >
[VK50VE]
EXHAUST MANIFOLD AND THREE WAY CATALYST
• Using the heated oxygen sensor wrench [SST: KV10114400
(J-38365)] (A), remove heated oxygen sensor 2 (1).
NOTE:
• The heated oxygen sensor 2 is removable under vehicle-
mounted condition.
• The figure shows an example of bank 1.
2.
Remove three way catalyst (bank 1 and bank 2).
3.
Remove air fuel ratio sensor 1as per the following:
CAUTION:
Air fuel ratio sensor 1 is not reusable. Never remove air fuel ratio sensor 1 unless this is required.
• Using the heated oxygen sensor wrench [SST: KV10114400 (J-38365)], remove air fuel ratio sensor 1.
NOTE:
The air fuel ration sensor 1 is removable under vehicle-mounted condition.
4.
Remove exhaust manifold.
• Loosen nuts in the reverse order of figure to remove exhaust
manifold with power tool.
NOTE:
Disregard No. 9 to No. 12 when loosening.
5.
Remove exhaust manifold gaskets.
CAUTION:
Cover engine openings to avoid entry of foreign materials.
ASSEMBLY
Note the following item, and install in the reverse order of removal.
Exhaust Manifold Gasket
• Install exhaust manifold gasket in directional shown in the figure.
Exhaust Manifold
JPBIA2329ZZ
A
: Bank 1
B
: Bank 2
: Engine front
JPBIA2080ZZ
A
: Triangle press
: Above
JPBIA2078ZZ
EXHAUST MANIFOLD AND THREE WAY CATALYST
EM-207
< UNIT DISASSEMBLY AND ASSEMBLY >
[VK50VE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
• Tighten mounting nuts in numerical order as shown in the figure.
NOTE:
Tighten mounting nuts No. 1 to 4 in two steps. The numerical order
No. 9 to 12 shown second steps.
Air Fuel Ratio Sensor 1, Heated Oxygen Sensor 2
CAUTION:
• Before installing a new sensors, clean exhaust system threads using oxygen sensor thread cleaner
(commercial service tool: J-43897-18 or J-43897-12), and apply anti-seize lubricant (commercial ser-
vice tool).
• Sensors are not reusable. Replace them with a new one after removal. When replacing them, handle
with care not to impact on them.
• When installing the new sensors, set the heated oxygen sen-
sor wrench [SST: KV10114400(J-38365)] (A) in the hexagonal
part to tighten the them.
• Never over torque sensors. Doing so may cause damage to the sensors, resulting in “MIL” coming
on.
Inspection
INFOID:0000000005245246
INSPECTION AFTER DISASSEMBLY
Surface Distortion
• Check the surface distortion of the exhaust manifold mating sur-
face with a straightedge (A) and a feeler gauge (B).
• If it exceeds the limit, replace exhaust manifold.
A
: Bank 1
B
: Bank 2
: Engine front
JPBIA2080ZZ
1
: Heated oxygen sensor 2 (bank 1)
JPBIA2329ZZ
Limit
: Refer to
.
JPBIA0018ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст