Infiniti FX35, FX50 (S51). Manual — part 1973
WASHER PUMP
WW-115
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WASHER PUMP
Exploded View
INFOID:0000000005234790
Removal and Installation
INFOID:0000000005234791
REMOVAL
1.
Remove the fender protector RH (front). Refer to
EXT-25, "FENDER PROTECTOR : Exploded View"
.
2.
Disconnect the washer pump connector.
3.
Disconnect the front washer tube and rear washer tube.
4.
Remove the washer pump from the washer tank.
5.
Remove the packing from the washer tank.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Never twist the packing when installing the washer pump.
1.
Washer pump connector
2.
Rear washer tube
3.
Washer pump
4.
Front washer tube
5.
Packing
6.
Washer tank
: Vehicle front
JPLIA1227ZZ
WW-116
< REMOVAL AND INSTALLATION >
WASHER LEVEL SWITCH
WASHER LEVEL SWITCH
Removal and Installation
INFOID:0000000005234792
The washer level switch must be replaced together with the washer tank as an assembly. Refer to
.
FRONT WASHER NOZZLE AND TUBE
WW-117
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WASHER NOZZLE AND TUBE
Hydraulic Layout
INFOID:0000000005234793
Removal and Installation
INFOID:0000000005234794
REMOVAL
1.
Open the hood.
2.
Use the stop point of washer nozzle (1) as the support point and
rotate nozzle to remove it from body, while pushing nozzle spray
point side along the hood.
3.
Disconnect the washer tube (2) from the washer nozzle.
INSTALLATION
1.
Connect the washer tube into the washer nozzle.
2.
Install the washer nozzle to the hood.
3.
Adjust the washer nozzle spray position. Refer to
WW-117, "Inspection and Adjustment"
.
CAUTION:
The spray positions differ. Check that left and right nozzles are installed correctly.
Inspection and Adjustment
INFOID:0000000005234795
INSPECTION
Washer Nozzle Inspection
1.
Front washer tube
2.
Front washer nozzle
3.
Front washer tube
4.
Washer tank
: Clip A
: Clip B
JPLIA1228ZZ
JPLIA0561ZZ
WW-118
< REMOVAL AND INSTALLATION >
FRONT WASHER NOZZLE AND TUBE
Check that air can pass through the hose by blowing forward (toward
the nozzle), and check that air cannot pass through by sucking.
ADJUSTMENT
Washer Nozzle Spray Position Adjustment
Adjust spray positions to match the positions shown in the figure.
Unit: mm (in)
JPLIA0562ZZ
1.
Black printed frame line
: Spray area
: Target spray position
Spray position
H
L
X
Y
S
A
204 (8.03)
486 (19.13)
80 (3.15)
226 (8.90)
79 (3.11)
B
274 (10.79)
358 (14.09)
80 (3.15)
319 (12.56)
99 (3.90)
C
274 (10.79)
124 (4.88)
80 (3.15)
332 (13.07)
96 (3.78)
D
269 (10.59)
126 (4.96)
80 (3.15)
304 (11.97)
93 (3.66)
E
298 (11.73)
253 (9.96)
80 (3.15)
332 (13.07)
94 (3.70)
F
239 (9.41)
466 (18.35)
80 (3.15)
295 (11.61)
91 (3.58)
JPLIA1229ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст