Infiniti F50. Manual — part 650
LIGHTING AND TURN SIGNAL SWITCH
LT-67
C
D
E
F
G
H
I
J
L
M
A
B
LT
LIGHTING AND TURN SIGNAL SWITCH
PFP:25540
Removal and Installation
EKS000TG
1.
Remove the steering column cover. Refer to
in “POWER STEERING SYSTEM (PS)” section.
2.
Remove lighting and turn signal switch mounting screw and
remove the lighting and turn signal switch from the spiral cable.
3.
Disconnect the lighting and turn signal switch connector.
Switch Circuit Inspection
EKS000TH
Using circuit tester, check continuity between the lighting and turn signal switch connector terminals in each
operation status of the switch.
Hi: “HIGH BEAM” position, Lo: “LOW BEAM” position, P: “FLASH TO PASS” position
PKIA0185E
SKIA0469E
LT-68
HAZARD SWITCH
HAZARD SWITCH
PFP:25290
Removal and Installation
EKS000TI
DI-131, "Disassembly and Assembly for Multifunction
,
DI-161, "Disassembly and Assembly for Multifunction
in “DRIVER INFORMATION SYSTEM (DI)” section.
PKIA0186E
STOP LAMP
LT-69
C
D
E
F
G
H
I
J
L
M
A
B
LT
STOP LAMP
PFP:26550
Wiring Diagram — STOP/L —
EKS000V1
TKWM0404E
LT-70
STOP LAMP
Bulb Replacement
EKS0014S
STOP LAMP
Refer to
LT-79, "REAR COMBINATION LAMP"
in “PARKING, LICENSE PLATE AND TAIL LAMPS”.
HIGH-MOUNTED STOP LAMP
1.
Remove the high-mounted stop lamp. Refer to
in “Removal and Installation”.
2.
Turn the high-mounted stop lamp bulb socket counterclockwise
and unlock it.
3.
Remove the bulb.
Removal and Installation
EKS000WD
STOP LAMP
Refer to
LT-80, "REAR COMBINATION LAMP"
in “PARKING, LICENSE PLATE AND TAIL LAMPS”.
HIGH-MOUNTED STOP LAMP
1.
Pull up the high-mounted stop lamp while pressing it toward rear
of the vehicle and remove from the vehicle.
2.
Disconnect the high-mounted stop lamp connector.
High-mounted Stop Lamp
: 12V 18W
PKIA0056E
PKIA0057E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст