Infiniti EX35. Manual — part 525
DLN-50
< REMOVAL AND INSTALLATION >
[TRANSFER: ETX13B]
TRANSFER ASSEMBLY
REMOVAL AND INSTALLATION
TRANSFER ASSEMBLY
Exploded View
INFOID:0000000003135725
Removal and Installation
INFOID:0000000003135726
REMOVAL
1.
Remove exhaust front tube with power tool. Refer to
EX-6, "Removal and Installation"
.
2.
Remove front propeller shaft. Refer to
DLN-75, "Removal and Installation"
.
3.
Remove rear propeller shaft. Refer to
DLN-89, "Removal and Installation"
4.
Disconnect AWD solenoid harness connector and separate harness from transfer assembly.
5.
Remove transfer air breather hose.
6.
Remove control rod. Refer to
TM-161, "Removal and Installation"
7.
Support transfer assembly and transmission assembly with a jack.
8.
Remove rear engine mounting member and engine mounting insulator with power tool. Refer to
"AWD : Removal and Installation"
.
9.
Lower jack to the position where the top transfer mounting bolts
can be removed.
10. Remove transfer mounting bolts with power tool and separate
transfer from transmission.
CAUTION:
Secure transfer assembly and transmission assembly to a
jack.
INSTALLATION
Note the following, and install in the reverse order of removal.
1.
Transfer assembly
: Vehicle front
Refer to
for symbols in the figure.
JSDIA0052GB
PDIA0560J
TRANSFER ASSEMBLY
DLN-51
< REMOVAL AND INSTALLATION >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
• When installing the transfer to the transmission, install the mount-
ing bolts following the standard below, tighten bolts to the specified
torque.
:Transfer to transmission.
:Transmission to transfer.
• When installing transfer air breather hose, make sure there are no pinched or restricted areas on the transfer
air breather hose caused by bending or winding.
- Set transfer air breather hose with paint mark facing upward.
- Be sure to insert transfer air breather hose (1) into breather tube
(2) until hose end reaches the tube's base.
- Do not deviate from the range (L) of the transfer air breather when
installing the transfer air breather hose (1) to the harness bracket
(2) of the transfer.
- Install transfer air breather hose (1) with bracket between the
adapter case (2) and the transmission case (3).
Bolt No.
1
2
3
4
Quantity
4
3
2
1
Bolt length “
” mm (in)
75 (2.95)
45 (1.77)
40 (1.57)
30 (1.18)
JPDIE0064ZZ
JSDIA0053ZZ
JSDIA0054ZZ
JSDIA0055ZZ
DLN-52
< REMOVAL AND INSTALLATION >
[TRANSFER: ETX13B]
TRANSFER ASSEMBLY
- Check that transfer breather hose is on the (
) side when install-
ing the transfer air breather hose (1) to A/T fluid charging pipe (2).
- Be sure to insert air breather hose to transfer tube until hose end
reaches the tube's base and another hose end reaches the tube
bend R portion of A/T fluid charging pipe.
• After the installation, check the fluid level, fluid leakage and the A/T
positions. Refer to
.
JSDIA0056ZZ
FRONT CASE AND REAR CASE
DLN-53
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
DISASSEMBLY AND ASSEMBLY
FRONT CASE AND REAR CASE
Exploded View
INFOID:0000000003566116
Disassembly
INFOID:0000000003135728
1.
Remove drain plug and filler plug.
1.
Drive chain
2.
Front drive shaft rear bearing
3.
Front drive shaft
4.
Front drive shaft front bearing
5.
Sprocket
6.
Mainshaft
7.
Needle bearing
8.
Snap ring
9.
Mainshaft bearing
10. Front case
11.
Front oil seal
12. Mainshaft oil seal
13. Oil cover
14. Electric controlled coupling
15. Spacer
16. Snap ring
17. O-ring
18. Oil gutter
19. Drain plug
20. Baffle plate
21. Rear bearing
22. Snap ring
23. Spacer
24. Rear oil seal
25. Companion flange
26. Self-lock nut
27. Breather tube
28. Rear case
29. Harness bracket
30. Retainer
31. Filler plug
32. Gasket
1: Apply Genuine Anaerobic Liquid Gasket or equivalent. Refer to
GI-15, "Recommended Chemical Products and Sealants"
2: Apply Genuine Silicone RTV or equivalent. Refer to
GI-15, "Recommended Chemical Products and Sealants"
: Apply transfer fluid. Refer to
MA-10, "Fluids and Lubricants"
Refer to
for symbols not described above.
JPDIE0057GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст