Infiniti EX35. Manual — part 526
DLN-54
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
FRONT CASE AND REAR CASE
2.
Remove mainshaft oil seal from front case with a suitable tool.
CAUTION:
Never damage the front case and mainshaft.
3.
Remove front oil seal from front case with a suitable tool.
CAUTION:
Never damage the front case and front drive shaft.
4.
Remove self-lock nut.
5.
Put a matching mark (A) on the end of mainshaft. The mark
should be in line with the mark (B) on the companion flange.
CAUTION:
For matching mark, use paint. Never damage mainshaft.
6.
Remove companion flange with a puller (A) (commercial service
tool).
CAUTION:
Never damage the companion flange.
7.
Remove rear oil seal from rear case with the puller (A) [SST:
KV381054S0 (J-34286)].
CAUTION:
Never damage the rear case.
PDIA0507J
PDIA0255E
JPDIE0060ZZ
JPDIE0087ZZ
JPDIE0065ZZ
FRONT CASE AND REAR CASE
DLN-55
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
8.
Remove spacer (1) from mainshaft.
9.
Remove front case and rear case fixing bolts, then remove har-
ness bracket.
10. Remove front case (1) from rear case by levering it up with a
suitable tool.
CAUTION:
Never damage the mating surface.
11. Remove snap ring (1) from front case.
JSDIA0097ZZ
Bolts symbol
Quantity
Bolt length “
” mm (in)
A
11
42 (1.65)
B
1
162 (6.38)
C
1
97 (3.82)
TORX bolt
1
40 (1.57)
JPDIE0053GB
JPDIE0066ZZ
JPDIE0067ZZ
DLN-56
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
FRONT CASE AND REAR CASE
12. Remove mainshaft bearing from front case with the drift (A)
[SST: KV38100300 (J-25523)].
13. Remove drive chain and front drive shaft while tapping front
drive shaft with plastic hammer.
CAUTION:
Never tap drive chain.
14. Remove oil gutter (1) from rear case.
15. Remove oil cover bolts from rear case. And then, remove oil
cover (1).
16. Remove retainer (1) from AWD solenoid harness connector.
17. Remove AWD solenoid harness connector from rear case.
18. Remove O-ring from AWD solenoid harness connector.
JPDIE0068ZZ
PDIA0257E
JSDIA0098ZZ
SDIA3609E
JSDIA0100ZZ
FRONT CASE AND REAR CASE
DLN-57
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
19. Remove mainshaft assembly from rear case with the drift (A)
[SST: ST33052000 (
—
)].
20. Remove snap ring (1) from rear case.
21. Remove rear bearing from rear case with the drifts.
22. Remove baffle plate (1) from rear case.
23. Remove breather tube from rear case.
JPDIE0069ZZ
JPDIE0070ZZ
A
: Drift bar [SST: ST30611000 (J-25742-1)]
B
: Drift [SST: ST35321000 (
—
)]
JPDIE0071ZZ
JPDIE0072ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст