Infiniti EX35. Manual — part 1562
WW-100
< ON-VEHICLE REPAIR >
WASHER TANK
ON-VEHICLE REPAIR
WASHER TANK
Exploded View
INFOID:0000000003139008
Removal and Installation
INFOID:0000000003139009
REMOVAL
1.
Remove the clip (A).
2.
Pull out the washer tank inlet (1) from the washer tank.
3.
Remove the fender protector RH (front). Refer to
"FENDER PROTECTOR : Exploded View"
.
4.
Remove the engine lower cover. Refer to
.
5.
Disconnect washer pump connector.
6.
Disconnect the washer level switch connector.
7.
Remove front washer tube and rear washer tube.
8.
Remove washer tank mounting bolts.
9.
Remove washer tank from the vehicle.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Add water up to the top of the washer tank inlet after installing. Check that there is no leakage.
1.
Washer tank inlet
2.
Washer tank
JPLIA0968ZZ
: Vehicle front
JPLIA0969ZZ
FRONT WASHER PUMP
WW-101
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WASHER PUMP
Exploded View
INFOID:0000000003139010
Removal and Installation
INFOID:0000000003139011
REMOVAL
1.
Remove the fender protector RH (front). Refer to
EXT-25, "FENDER PROTECTOR : Removal and Instal-
.
2.
Disconnect the washer pump connector.
3.
Remove front washer tube and rear washer tube.
4.
Remove washer pump from the washer tank.
5.
Remove the packing from the washer tank.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Never twist the packing when installing the washer pump.
1.
Washer pump connector
2.
Rear washer tube
3.
Washer pump
4.
Front washer tube
5.
Packing
6.
Washer tank
: Vehicle front
JPLIA0970ZZ
WW-102
< ON-VEHICLE REPAIR >
WASHER LEVEL SWITCH
WASHER LEVEL SWITCH
Removal and Installation
INFOID:0000000003139012
The washer level switch must be replaced together with the washer tank as an assembly. Refer to
.
FRONT WASHER NOZZLE AND TUBE
WW-103
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WASHER NOZZLE AND TUBE
Hydraulic Layout
INFOID:0000000003139013
Removal and Installation
INFOID:0000000003587113
REMOVAL
1.
Open the hood.
2.
Use the stop point of washer nozzle (1) as the support point and
rotate nozzle to remove it from body, while pushing nozzle spray
point side along the hood.
3.
Remove the washer tube (2) from the washer nozzle.
INSTALLATION
1.
Install washer tube into the washer nozzle.
2.
Install the washer nozzle to the hood.
3.
Adjust the washer nozzle spray position. Refer to
WW-103, "Inspection and Adjustment"
.
CAUTION:
The spray positions differ. Check that left and right nozzles are installed correctly.
Inspection and Adjustment
INFOID:0000000003587114
INSPECTION
Washer Nozzle Inspection
1.
Front washer tube
2.
Front washer nozzle
3.
Front washer tube
4.
Washer tank
: Clip
: Clip
JPLIA0971ZZ
JPLIA0561ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст