Infiniti EX35. Manual — part 983
INSTRUMENT PANEL ASSEMBLY
IP-17
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
27. Remove center speaker grille.
• Disengage center speaker grille (1) fixing clips and pawls with
remover tool (A).
• Pull up center speaker grille.
28. Remove center speaker. (with BOSE AUDIO) Refer to
AV-418, "Removal and Installation"
.
29. Remove instrument side panel LH.
• Remove instrument side panel LH (1) fixing screws (A).
• Pull toward the arrow direction.
30. Remove inside key antenna. Refer to
DLK-258, "INSTRUMENT CENTER : Removal and Installation"
.
31. Remove harness connector bracket (1) fixing screw (A).
32. Remove cluster lid C.
• Remove cluster lid C (1) fixing screws (A).
• Pull down and back cluster lid C.
• Disconnect harness connectors.
: Clip
: Pawl
JMJIA1622ZZ
: Clip
JMJIA1623ZZ
JMJIA1624ZZ
: Pawl
JMJIA1625ZZ
IP-18
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
33. Remove cluster lid D.
• Remove cluster lid D (1) fixing screws (A).
• Pull back cluster lid D.
• Disconnect harness connectors.
34. Remove display unit.
• Remove display unit (1) fixing screws (A).
• Pull toward the arrow direction.
• Disconnect harness connectors.
35. Remove AV C/U.
AV-156, "Removal and Installation"
.
• Remove AV C/U (1) fixing screws (A).
• Pull back AV C/U.
• Disconnect harness connectors.
36. Remove push button ignition switch. Refer to
SEC-205, "Removal and Installation"
.
37. Remove front defroster grille LH. Refer to
VTL-49, "FRONT DEFROSTER GRILLE : Removal and Instal-
.
38. Remove front defroster grille RH. Refer to
VTL-49, "FRONT DEFROSTER GRILLE : Removal and Instal-
.
39. Remove instrument side finisher RH.
• Insert a remover tool into lower space.
• Pull the instrument side finisher RH (1) crosswise.
40. Remove glove box assembly.
• Open the glove box.
: Pawl
JMJIA1626ZZ
JMJIA1627ZZ
JMJIA1628ZZ
: Clip
: Pawl
JMJIA1629ZZ
INSTRUMENT PANEL ASSEMBLY
IP-19
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
• Pull back glove box assembly (1).
• Remove damper pin (1) of left side.
41. Remove instrument lower cover.
• Pull downward, disengaged pawls.
• Pull back instrument lower cover (1).
• Disconnect illumination lamp harness connector.
42. Remove instrument lower panel RH.
• Remove instrument lower panel RH (1) fixing screws (A).
• Pull back instrument lower panel RH.
• Disconnect glove box lamp harness connector.
43. Disconnect front passenger air bag module connector. Refer to
44. Remove front passenger air bag module fixing bolt. Refer to
SR-8, "Removal and Installation"
JMJIA1630ZZ
: Clip
JMJIA1631ZZ
: Pawl
JMJIA1632ZZ
: Pawl
JMJIA1633ZZ
IP-20
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
45. Remove instrument side panel RH.
• Remove instrument side panel RH (1) fixing screws (A).
• Pull toward the arrow direction.
46. Remove front body side welt RH. Refer to
INT-20, "Removal and Installation"
47. Remove front pillar garnish RH. Refer to
INT-20, "Removal and Installation"
.
48. Remove speaker grille RH.
• Pull up and back tweeter grille RH (1).
• Disconnect front squawker harness connector.
49. Remove instrument panel assembly mounting bolts (A), screws (B) and clips (C).
50. Remove instrument panel assembly.
CAUTION:
• Cover center console upper surface with a shop cloth to prevent it from being damaged.
• When removing instrument panel assembly, 2 workers are required so as to prevent it from drop-
ping.
51. Remove the following parts after removing instrument panel assembly.
• Front passenger air bag module. Refer to
SR-8, "Removal and Installation"
.
• Center ventilator grille LH/RH. Refer to
VTL-47, "CENTER VENTILATOR GRILLE : Removal and Instal-
• Side ventilator grille LH/RH. Refer to
VTL-48, "SIDE VENTILATOR GRILLE : Removal and Installation"
• Ventilator duct LH/RH. Refer to
VTL-50, "VENTILATOR DUCT : Removal and Installation"
• Adaptor duct. Refer to
VTL-52, "ADAPTOR DUCT : Removal and Installation"
.
• Defroster nozzle. Refer to
VTL-53, "DEFROSTER NOZZLE : Removal and Installation"
.
: Clip
JMJIA1634ZZ
: Clip
: Pawl
JMJIA1621ZZ
JMJIA1636ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст